The DOI matches its Crossref record.
Bearing Fault Detection Via Stator Current Noise Cancellation and Statistical Control
Abstract
This paper proposes a new approach to detectinsitubearing faults via stator current monitoring. Forinsitubearing faults, the characteristic bearing fault frequencies may not exist, particularly at an early stage. In addition, the bearing fault signatures are usually subtle compared to the dominant components in the sampled stator current. Therefore, in this paper, a noise cancellation technique is used to suppress those dominant components that are not related to a potential bearing fault. The remaining components, i.e., the noise-cancelled stator current, are then closely related to the health condition of the bearing. Furthermore, it is observed that under the presence of a bearing fault, the noise-cancelled stator current displays a significant amount of degrees of uncontrolled variation in its magnitude. The uncontrolled variation is detected by observing the samples falling outside the three-sigma limits on Shewhart's control charts. Therefore, it is possible to detectinsitubearing faults by detecting the variation in magnitude of the noise-cancelled stator current, as verified by online experiments performed in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
“Time-domain in [2, 3], frequency-domain in [4 – 6], and time – frequency analysis techniques in [7 – 10] have been applied as signal-based systems for extracting the health information from the measured data.”
MethodA Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Self-citationA survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Self-citationCao, P., Zhang, S., & Tang, J. (2018) · IEEE Access · doi:10.1109/access.2018.2837621 · Cited by 460
Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant Analysis
Jin, X., Zhao, M., Chow, T. W. S., & Pecht, M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273471 · Cited by 423
Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274
“In contrast, single-point defects are localized and can be classified according to their affected element [12].”
BackgroundA Probabilistic Fault Detection Approach: Application to Bearing Fault Detection
Zhang, B., Sconyers, C., Byington, C., Patrick, R., Orchard, M. E., & Vachtsevanos, G. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2058072 · Cited by 269
Frosini, L., & Bassi, E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026770 · Cited by 254
Bearing fault detection by one-dimensional convolutional neural networks
Eren, L. (2017) · Mathematical Problems in Engineering · doi:10.1155/2017/8617315 · Cited by 250
Plastic Bearing Fault Diagnosis Based on a Two-Step Data Mining Approach
He, D., Li, R., & Zhu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2192894 · Cited by 143
Cira, F., Arkan, M., Gumus, B., & Goktas, T. (2016) · IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2016.7793717 · Cited by 31
An effective method for detection of stator fault in PMSM with 1D-LBP
Mi̇naz, M. R. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.07.013 · Cited by 23
Metadata
- Authors
- Zhou, W., Habetler, T. G., & Harley, R. G.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2008-12
- Volume
- 55
- Issue
- 12
- Pages
- 4260-4269
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2144187919
- Cited by
- 165
- References
- 0
- FWCI
- 12.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.