Design Guidelines for Interleaved Single-Phase Boost PFC Circuits
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
This paper provides a comprehensive guideline for the design of a single-phase PFC targeting for minimal volume, as it is highly relevant for ultracompact integrated systems. It is shown, how different operation modes (continuous, boundary, and discontinuous conduction mode) may influence the design and consequently the achieved power density. Furthermore, the effect of interleaving of several boost stages is analyzed as a measure for compactness increase. Finally, the selection of the appropriate switching frequency in order to achieve an overall optimized system is discussed. In this way, the design of the crucial components is carried out, namely, the boost inductor, including a volume optimization through a thermal connection to the heat sink; the output capacitor considering the rms current stress; and the input filter, which is designed for compliance with high-frequency electromagnetic compatibility standards, taking into account the quasi-peak detection measurement of the test receiver equipment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145 · cited 1×
“For piecewise linear current curves, the Steinmetz equation can be adapted according to [36] Here, A c stands for the cross-sectional area of the core, and the same factors a and b of the datasheets can be utilized as for (9).”
Steinmetz, C. P. (1984) · Proceedings of the IEEE · doi:10.1109/proc.1984.12842 · Cited by 656
Cited by
Design and Analysis of a Full-Bridge LLC-Based PEV Charger Optimized for Wide Battery Voltage Range
Wang, H., Dusmez, S., & Khaligh, A. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2288772 · Cited by 293
Li, C., Zhang, Y., Cao, Z., & XU, D. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2623771 · Cited by 86
“Design of passive components for ac–dc converter can be referred to [25].”
BackgroundPraneeth, A. V. J. S., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2919197 · Cited by 50
“Among them, boost converter topologies such as conventional, interleaved, semibridgeless, and phase-shifted bridgeless boost converters have gained much attention for its smooth continuous input current and efficient operation [8].”
BackgroundA 22 kW on-board charger for automotive applications based on a modular design
Schmenger, J., Endres, S., Zeltner, S., & Marz, M. (2014) · 2014 IEEE Conference on Energy Conversion (CENCON) · doi:10.1109/cencon.2014.6967467 · Cited by 44
Metadata
- Authors
- Nussbaumer, T., Raggl, K., & Kolar, J. W.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2009-07
- Volume
- 56
- Issue
- 7
- Pages
- 2559-2573
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2100201474
- Cited by
- 220
- References
- 2
- FWCI
- 9.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design Guidelines for Interleaved Single-Phase Boost PFC Circuits. https://app.cochat.ai/papers/10.1109/tie.2009.2020073
- The paper
- Nussbaumer, T., Raggl, K., & Kolar, J. W. (2009). Design Guidelines for Interleaved Single-Phase Boost PFC Circuits. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2009.2020073
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.