The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Selective Harmonic Mitigation Technique for High-Power Converters
Open accessAbstract
In high-power applications, the maximum switching frequency is limited due to thermal losses. This leads to highly distorted output waveforms. In such applications, it is necessary to filter the output waveforms using bulky passive filtering systems. The recently presented selective harmonic mitigation pulsewidth modulation (SHMPWM) technique produces output waveforms where the harmonic distortion is limited, fulfilling specific grid codes when the number of switching angles is high enough. The related technique has been previously presented using a switching frequency that is equal to 750 Hz. In this paper, a special implementation of the SHMPWM technique optimized for very low switching frequency is studied. Experimental results obtained applying SHMPWM to a three-level neutral-point-clamped converter using a switching frequency that is equal to 350 Hz are presented. The obtained results show that the SHMPWM technique improves the results of previous selective harmonic elimination pulsewidth modulation techniques for very low switching frequencies. This fact highlights that the SHMPWM technique is very useful in high-power applications, leading its use to an important reduction of the bulky and expensive filtering elements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optimization by Simulated Annealing
Kirkpatrick, S., Gelatt, C. D., & Vecchi, M. P. (1983) · Science · doi:10.1126/science.220.4598.671 · Cited by 45,134
Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives
Rodriguez, J., Bernet, S., Wu, B., Pontt, J. O., & Kouro, S. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.907044 · Cited by 2,385
The age of multilevel converters arrives
Franquelo, L., Rodriguez, J., Leon, J., Kouro, S., Portillo, R., & Prats, M. (2008) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2008.923519 · Cited by 2,016
Self-citationPatel, H. S., & Hoft, R. G. (1973) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1973.349908 · Cited by 1,221
Akagi, H. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.859603 · Cited by 1,011
Grid current regulation of a three-phase voltage source inverter with an LCL input filter
Twining, E., & Holmes, D. G. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.810838 · Cited by 901
Comparison of 2.3-kV Medium-Voltage Multilevel Converters for Industrial Medium-Voltage Drives
Krug, D., Bernet, S., Fazel, S. S., Jalili, K., & Malinowski, M. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.906997 · Cited by 292
A Flexible Selective Harmonic Mitigation Technique to Meet Grid Codes in Three-Level PWM Converters
Franquelo, L. G., Napoles, J., Guisado, R. C. P., Leon, J. I., & Aguirre, M. A. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.907045 · Cited by 264
Self-citationUse of an LC filter to achieve a motor-friendly performance of the PWM voltage source inverter
Steinke, J. K. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.790930 · Cited by 261
Inverter Harmonic Elimination Through a Colony of Continuously Exploring Ants
Sundareswaran, K., Jayant, K., & Shanavas, T. N. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.899846 · Cited by 159
Cited by
Dahidah, M. S. A., Konstantinou, G., & Agelidis, V. G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2355226 · Cited by 599
A Review of Architectures and Concepts for Intelligence in Future Electric Energy Systems
Strasser, T., Andren, F., Kathan, J., Cecati, C., Buccella, C., Siano, P., Leitao, P., Zhabelova, G., Vyatkin, V., Vrba, P., et al. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2361486 · Cited by 572
Leon, J. I., Vazquez, S., & Franquelo, L. G. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2726583 · Cited by 481
Self-citationLeon, J. I., Kouro, S., Franquelo, L. G., Rodriguez, J., & Wu, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519321 · Cited by 462
Self-citationBana, P. R., Panda, K. P., Naayagi, R. T., Siano, P., & Panda, G. (2019) · IEEE Access · doi:10.1109/access.2019.2913447 · Cited by 361
Metadata
- Authors
- Napoles, J., Leon, J. I., Portillo, R., Franquelo, L. G., & Aguirre, M. A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-07
- Volume
- 57
- Issue
- 7
- Pages
- 2315-2323
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2097011417
- Cited by
- 261
- References
- 12
- FWCI
- 8.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective Harmonic Mitigation Technique for High-Power Converters. https://app.cochat.ai/papers/10.1109/tie.2009.2026759
- The paper
- Napoles, J., Leon, J. I., Portillo, R., Franquelo, L. G., & Aguirre, M. A. (2010). Selective Harmonic Mitigation Technique for High-Power Converters. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2009.2026759
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
