The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Design, Testing, and Validation of a Simplified Control Scheme for a Novel Plug-In Hybrid Electric Vehicle Battery Cell Equalizer
Abstract
In order to meet cost targets for hybrid electric (HEV), plug-in hybrid electric (PHEV), and all-electric vehicles (EV), an improvement in the battery life cycle and safety is essential. Recently, lithium batteries, in the form of lithium-ion, lithium-polymer, or lithium iron phosphate have been explored. Despite research initiatives, lithium-based batteries have not yet been able to meet steep energy demands, long lifetime, and low cost of vehicular propulsion applications. One practical approach to improve performance is to use power electronics intensive cell voltage equalizers, in conjunction with on-board energy storage devices. The purpose of this paper is to introduce a simplified control scheme, based on open-circuit voltage estimation, for a novel cell equalizer configuration, with the potential to fulfil expectations of the following: 1) low cost; 2) large currents; and 3) high efficiency. Issues, such as the limitations on maximum and minimum cell voltage, noise, and quantization errors, are explored. Finally, a comprehensive comparison between the theoretical test results and practical equalization test results is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427 · cited 3×
“presented in [6] has been chosen, because of its simplicity and high precision in the range of SOC typically used in EV (from 30% to 80% SOC) [1], [2].”
BackgroundMethod
Cited by
Battery Management System: An Overview of Its Application in the Smart Grid and Electric Vehicles
Rahimi-Eichi, H., Ojha, U., Baronti, F., & Chow, M.-Y. (2013) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2250351 · Cited by 960
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M., & Hossain, E. (2017) · Energies · doi:10.3390/en10081217 · Cited by 809
Battery equalization active methods
Gallardo-Lozano, J., Romero-Cadaval, E., Milanes-Montero, M. I., & Guerrero-Martinez, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.026 · Cited by 542
Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges
Williamson, S. S., Rathore, A. K., & Musavi, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2409052 · Cited by 527
Self-citationA Chain Structure of Switched Capacitor for Improved Cell Balancing Speed of Lithium-Ion Batteries
Kim, M.-Y., Kim, C.-H., Kim, J.-H., & Moon, G.-W. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2288195 · Cited by 359
Metadata
- Authors
- Cassani, P. A., & Williamson, S. S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-12
- Volume
- 57
- Issue
- 12
- Pages
- 3956-3962
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2109161851
- Cited by
- 222
- References
- 1
- FWCI
- 34.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design, Testing, and Validation of a Simplified Control Scheme for a Novel Plug-In Hybrid Electric Vehicle Battery Cell Equalizer. https://app.cochat.ai/papers/10.1109/tie.2010.2050750
- The paper
- Cassani, P. A., & Williamson, S. S. (2010). Design, Testing, and Validation of a Simplified Control Scheme for a Novel Plug-In Hybrid Electric Vehicle Battery Cell Equalizer. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2010.2050750
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.