The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
A New Multilevel Converter Topology With Reduced Number of Power Electronic Components
Abstract
In this paper, a new topology for cascaded multilevel converter based on submultilevel converter units and full-bridge converters is proposed. The proposed topology significantly reduces the number of dc voltage sources, switches, IGBTs, and power diodes as the number of output voltage levels increases. Also, an algorithm to determine dc voltage sources magnitudes is proposed. To synthesize maximum levels at the output voltage, the proposed topology is optimized for various objectives, such as the minimization of the number of switches, gate driver circuits and capacitors, and blocking voltage on switches. The analytical analyses of the power losses of the proposed converter are also presented. The operation and performance of the proposed multilevel converter have been evaluated with the experimental results of a single-phase 125-level prototype converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Neutral-Point-Clamped PWM Inverter
Nabae, A., Takahashi, I., & Akagi, H. (1981) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1981.4503992 · Cited by 5,139
Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives
Rodriguez, J., Bernet, S., Wu, B., Pontt, J. O., & Kouro, S. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.907044 · Cited by 2,385
A Survey on Cascaded Multilevel Inverters
Malinowski, M., Gopakumar, K., Rodriguez, J., & Pérez, M. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030767 · Cited by 2,322
Abu-Rub, H., Holtz, J., Rodriguez, J., & Baoming, G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043039 · Cited by 1,337
Multilevel Converters: An Enabling Technology for High-Power Applications
Rodriguez, J., Franquelo, L. G., Kouro, S., Leon, J. I., Portillo, R. C., Prats, M. A. M., & Perez, M. A. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2030235 · Cited by 1,196
Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters
Rohner, S., Bernet, S., Hiller, M., & Sommer, R. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031187 · Cited by 934
Villanueva, E., Correa, P., Rodriguez, J., & Pacas, M. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2029579 · Cited by 795
A Cascade Multilevel Converter Topology With Reduced Number of Switches
Babaei, E. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005192 · Cited by 669
Self-citationModel Predictive Control of Multilevel Cascaded H-Bridge Inverters
Cortés, P., Wilson, A., Kouro, S., Rodriguez, J., & Abu-Rub, H. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2041733 · Cited by 522
New cascaded multilevel inverter topology with minimum number of switches
Babaei, E., & Hosseini, S. H. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.06.032 · Cited by 508
Self-citationMulti-Level Choppers for High Voltage Applications
Meynard, T. A., & Foch, H. (1992) · EPE Journal · doi:10.1080/09398368.1992.11463285 · Cited by 494
Su, G.-J. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.847306 · Cited by 439
Survey on Fault Operation on Multilevel Inverters
Lezana, P., Pou, J., Meynard, T. A., Rodriguez, J., Ceballos, S., & Richardeau, F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2032194 · Cited by 384
Fazel, S. S., Bernet, S., Krug, D., & Jalili, K. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900476 · Cited by 356
A non conventional power converter for plasma stabilization
Marchesoni, M., Mazzucchelli, M., & Tenconi, S. (2003) · PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1988.18125 · Cited by 345
Modern HVDC PLUS application of VSC in Modular Multilevel Converter topology
Friedrich, K. (2010) · 2010 IEEE International Symposium on Industrial Electronics · doi:10.1109/isie.2010.5637505 · Cited by 280
Double Flying Capacitor Multicell Converter Based on Modified Phase-Shifted Pulsewidth Modulation
Sadigh, A. K., Hosseini, S. H., Sabahi, M., & Gharehpetian, G. B. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2039147 · Cited by 211
Self-citationMultidimensional Modulation Technique for Cascaded Multilevel Converters
Leon, J. I., Kouro, S., Vazquez, S., Portillo, R., Franquelo, L. G., Carrasco, J. M., & Rodriguez, J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2048833 · Cited by 165
Lu, S., Mariéthoz, S., & Corzine, K. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2041734 · Cited by 96
Babaei, E., & Moeinian, M. S. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.03.022 · Cited by 58
Self-citation
Cited by
Multilevel Inverter Topologies With Reduced Device Count: A Review
Gupta, K. K., Ranjan, A., Bhatnagar, P., Sahu, L. K., & Jain, S. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2405012 · Cited by 1,193
Hybrid Multilevel Inverter Using Switched Capacitor Units
Babaei, E., & Gowgani, S. S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2290769 · Cited by 498
“The behavior of the first proposed topology is accorded to the topology presented in [23] and has less variety of dc voltage source magnitude than the topologies presented in [19]–[22].”
BackgroundMethodSelf-citationA General Review of Multilevel Inverters Based on Main Submodules: Structural Point of View
Vijeh, M., Rezanejad, M., Samadaei, E., & Bertilsson, K. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2890649 · Cited by 473
A Step-Up Switched-Capacitor Multilevel Inverter With Self-Voltage Balancing
Ye, Y., Cheng, K. W. E., Liu, J., & Ding, K. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2314052 · Cited by 464
A Novel Multilevel Inverter Based on Switched DC Sources
Gupta, K. K., & Jain, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2282606 · Cited by 435
Metadata
- Authors
- Ebrahimi, J., Babaei, E., & Gharehpetian, G. B.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-02
- Volume
- 59
- Issue
- 2
- Pages
- 655-667
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2137047571
- Cited by
- 525
- References
- 20
- FWCI
- 18.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.