The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Improved Design and Analysis of Self-Powered Synchronized Switch Interface Circuit for Piezoelectric Energy Harvesting Systems
Abstract
In piezoelectric energy harvesting (PEH), with the use of the technique named synchronized switch harvesting on inductor (SSHI), the harvesting efficiency can be greatly enhanced. Furthermore, the introduction of its self-powered feature makes this technique more applicable for stand-alone systems. In this paper, a modified circuit and an improved analysis for the self-powered SSHI (SP-SSHI) are proposed. With the modified circuit, direct peak detection and better isolation among different units within the circuit are achieved, both of which result in the further removal on the dissipative components. In the improved analysis, details in the open circuit voltage, switching phase lag, and intermediate voltages among different phases are discussed, all of which lead to a better understanding on the working principle of SP-SSHI. The total power dissipation from the piezoelectric source is also investigated. It is of concern but has not been considered in the previous literatures. Both analyses and experiments show that, in terms of the harvested power, the higher the excitation level, the closer between SP-SSHI and ideal (externally powered) SSHI; at the same time, the more beneficial the adoption of SP-SSHI treatment in PEH, compared to the standard energy harvesting (SEH) technique. Under the four excitation levels investigated, the SP-SSHI can harvest up to 200% more power than the SEH interface circuit.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy Scavenging for Mobile and Wireless Electronics
Paradiso, J. A., & Starner, T. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.9 · Cited by 2,653
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Adaptive piezoelectric energy harvesting circuit for wireless remote power supply
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802194 · Cited by 1,206
Toward energy harvesting using active materials and conversion improvement by nonlinear processing
Guyomar, D., Badel, A., Lefeuvre, E., & Richard, C. (2005) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2005.1428041 · Cited by 1,049
Adaptive piezoelectric energy harvesting circuit for wireless, remote power supply
Ottman, G., Bhatt, A., Hofmann, H., & Lesieutre, G. (2001) · 19th AIAA Applied Aerodynamics Conference · doi:10.2514/6.2001-1505 · Cited by 953
A comparison between several vibration-powered piezoelectric generators for standalone systems
Lefeuvre, E., Badel, A., Richard, C., Petit, L., & Guyomar, D. (2006) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2005.10.043 · Cited by 712
Ottman, G. K., Hofmann, H. F., & Lesieutre, G. A. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809379 · Cited by 672
Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art
Khaligh, A., Zeng, P., & Zheng, C. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024652 · Cited by 669
An improved analysis of the SSHI interface in piezoelectric energy harvesting
Shu, Y. C., Lien, I. C., & Wu, W. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/6/028 · Cited by 324
An optimized self-powered switching circuit for non-linear energy harvesting with low voltage output
Lallart, M., & Guyomar, D. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/3/035030 · Cited by 304
Energy Harvesting From Piezoelectric Materials Fully Integrated in Footwear
Rocha, J. G., Goncalves, L. M., Rocha, P. F., Silva, M. P., & Lanceros-Mendez, S. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2028360 · Cited by 273
Tabesh, A., & Frechette, L. G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037648 · Cited by 244
Lien, I. C., Shu, Y. C., Wu, W. J., Shiu, S. M., & Lin, H. C. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/12/125009 · Cited by 175
Energy flow in piezoelectric energy harvesting systems
Liang, J., & Liao, W. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/20/1/015005 · Cited by 148
Self-citationMechanical Energy Harvester With Ultralow Threshold Rectification Based on SSHI Nonlinear Technique
Garbuio, L., Lallart, M., Guyomar, D., Richard, C., & Audigier, D. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2014673 · Cited by 142
Li, W. G., He, S., & Yu, S. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030761 · Cited by 129
Piezoelectric Energy Harvesting and Dissipation on Structural Damping
Liang, J., & Liao, W. (2008) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x08098194 · Cited by 108
Self-citationEnergy Harvesting From Vibration With Alternate Scavenging Circuitry and Tapered Cantilever Beam
Mehraeen, S., Jagannathan, S., & Corzine, K. A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037652 · Cited by 95
Comparison between four piezoelectric energy harvesting circuits
Qiu, J., Jiang, H., Ji, H., & Zhu, K. (2009) · Frontiers of Mechanical Engineering in China · doi:10.1007/s11465-009-0031-z · Cited by 86
Low energy dissipation electric circuit for energy harvesting
Makihara, K., Onoda, J., & Miyakawa, T. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/5/039 · Cited by 80
Self-Contained Resonant Rectifier for Piezoelectric Sources Under Variable Mechanical Excitation
Krihely, N., & Ben‐Yaakov, S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2050336 · Cited by 72
Cited by
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Other adaptations to the synchronized switching concept include double synchronized switch harvesting (DSSH) presented by Lallart et al in 2008 [296], enhanced synchronized switch harvesting (ESSH) presented by Shen et al in 2010 [297], synchronized switch harvesting on inductor using magnetic rectifier (SSHI-MR) pres…”
MethodYang, T., Zhou, S., Fang, S., Qin, W., & Inman, D. J. (2021) · Applied Physics Reviews · doi:10.1063/5.0051432 · Cited by 259
A universal standardized method for output capability assessment of nanogenerators
Xia, X., Fu, J., & Zi, Y. (2019) · Nature Communications · doi:10.1038/s41467-019-12465-2 · Cited by 125
Metadata
- Authors
- Liang, J., & Liao, W.-H.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-04
- Volume
- 59
- Issue
- 4
- Pages
- 1950-1960
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2171391502
- Cited by
- 318
- References
- 21
- FWCI
- 21.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.