The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Analysis, Design, and Experimental Results of Novel Snubberless Bidirectional Naturally Clamped ZCS/ZVS Current-Fed Half-Bridge DC/DC Converter for Fuel Cell Vehicles
Abstract
This paper presents a novel snubberless naturally clamped bidirectional current-fed half-bridge isolated dc/dc converter for fuel cell vehicles (FCVs). The proposed converter achieves zero-current switching (ZCS) of the primary-side active semiconductor devices and zero-voltage switching of the secondary-side active semiconductor devices. It is a potential topology for FCVs, front-end dc/dc power conversion for fuel cell inverters, and energy storage. A proposed secondary-modulation clamps the voltage across the primary-side devices (current fed) naturally and eliminates switch turn-off voltage spike concern with ZCS without any additional circuit. This leads to reduced footprints and lower cost. Voltage across the primary-side current-fed devices is independent of duty cycle like conventional current-fed converters but clamped at a reflected output voltage. Therefore, comparatively low-voltage-rating devices with a low on-state resistance are used, introducing low conduction losses and higher efficiency. Steady-state analysis, operation, design, simulation, and experimental results of the proposed converter are reported in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khaligh, A., & Li, Z. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2047877 · Cited by 1,817
Cited by
Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges
Williamson, S. S., Rathore, A. K., & Musavi, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2409052 · Cited by 527
Self-citationReview of power electronics in vehicle-to-grid systems
Sharma, A., & Sharma, S. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.022 · Cited by 261
Comparative analysis of bidirectional three-level DC–DC converter for automotive applications
Dusmez, S., Hasanzadeh, A., & Khaligh, A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336605 · Cited by 204
Non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents
Song, M.-S., Son, Y.-D., & Lee, K.-H. (2014) · Journal of Power Electronics · doi:10.6113/jpe.2014.14.4.649 · Cited by 56
A Single-Phase Battery Charger Design for LEV Based on DC-SRC with Resonant Valley-Fill Circuit
Lee, J.-Y., Yoon, Y.-D., & Kang, J.-W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2351371 · Cited by 44
Metadata
- Authors
- Rathore, A. K., & U.R., P.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-10
- Volume
- 60
- Issue
- 10
- Pages
- 4482-4491
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2019462594
- Cited by
- 174
- References
- 1
- FWCI
- 10.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis, Design, and Experimental Results of Novel Snubberless Bidirectional Naturally Clamped ZCS/ZVS Current-Fed Half-Bridge DC/DC Converter for Fuel Cell Vehicles. https://app.cochat.ai/papers/10.1109/tie.2012.2213563
- The paper
- Rathore, A. K., & U.R., P. (2013). Analysis, Design, and Experimental Results of Novel Snubberless Bidirectional Naturally Clamped ZCS/ZVS Current-Fed Half-Bridge DC/DC Converter for Fuel Cell Vehicles. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2012.2213563
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.