The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Bearing Fault Model for Induction Motor With Externally Induced Vibration
Open accessAbstract
This paper investigates the relationship between vibration and current in induction motors operated under external vibrations. Two approaches are usually available to define this relationship. The former is based on airgap variations, while the latter is based on torque perturbation. This paper is focused on the airgap variation model. The ball bearing fault is modeled by contact mechanics. External vibrations often occur in many industrial applications where externally induced vibrations of suitable amplitude cause cyclic radial loading on the machine shaft. The model is validated by experiments, owing to a dedicated test setup, where an external vibration source (shaker) was employed, together with ball bearing alterations in order to decrease the stiffness of the support along the radial direction. To maximize the effects of externally induced vibrations, the frequency chosen was near the flexural resonance of the rotor (determined by finite-element method analysis). The direction of the external vibration is radial with respect to the axis of the electric machine under test. During tests, both stator phase currents and vibration of the machine were sampled. The test setup allowed one to vary the machine speed and load, vibration amplitude, and bearing stiffness (damage level). Radial effects are usually visible only in the case of large failures that result in significant airgap variations, as confirmed by experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RUBINI, R., & MENEGHETTI, U. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1330 · Cited by 323
Self-citation
Cited by
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Riera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
Electric Locomotive Bearing Fault Diagnosis Using a Novel Convolutional Deep Belief Network
Shao, H., Jiang, H., Zhang, H., & Liang, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745473 · Cited by 488
Extended Kalman Filtering for Remaining-Useful-Life Estimation of Bearings
Singleton, R. K., Strangas, E. G., & Aviyente, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336616 · Cited by 364
Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274
Metadata
- Authors
- Immovilli, F., Bianchini, C., Cocconcelli, M., Bellini, A., & Rubini, R.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-08
- Volume
- 60
- Issue
- 8
- Pages
- 3408-3418
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2035398862
- Cited by
- 181
- References
- 1
- FWCI
- 16.69
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bearing Fault Model for Induction Motor With Externally Induced Vibration. https://app.cochat.ai/papers/10.1109/tie.2012.2213566
- The paper
- Immovilli, F., Bianchini, C., Cocconcelli, M., Bellini, A., & Rubini, R. (2013). Bearing Fault Model for Induction Motor With Externally Induced Vibration. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2012.2213566
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.