High-Conversion-Ratio Bidirectional DC–DC Converter With Coupled Inductor
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this paper, a high-conversion-ratio bidirectional dc–dc converter with coupled inductor is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stress on the main switch is reduced by a passive clamp circuit. Therefore, the low resistance$R_{{DS}({\rm ON})}$of the main switch can be adopted to reduce conduction loss. In the buck mode, two capacitors are series charged and parallel discharged by the coupled inductor. The bidirectional converter can have high step-down gain. Aside from that, all of the switches achieve zero voltage-switching turn-on, and the switching loss can be improved. Due to two active clamp circuits, the energy of the leakage inductor of the coupled inductor is recycled. The efficiency can be further improved. The operating principle and the steady-state analyses of the voltage gain are discussed. Finally, a 24-V-input-voltage, 400-V-output-voltage, and 200-W-output-power prototype circuit is implemented in the laboratory to verify the performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices
Li, H., Peng, F. Z., & Lawler, J. S. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808965 · Cited by 296
Three-level bidirectional converter for fuel-cell/battery hybrid power system
Jin, K., Yang, M., Ruan, X., & Xu, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031197 · Cited by 245
Novel forward–flyback hybrid bidirectional DC–DC converter
Zhang, F., & Yan, Y. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2009561 · Cited by 184 · cited 1×
“verters are characterized by a current-fed rectifier on the lowvoltage (LV) side and a voltage-fed rectifier on the HV side [12], [13].”
Background
Cited by
Flores Cortez, D., Waltrich, G., Fraigneaud, J., Miranda, H., & Barbi, I. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350454 · Cited by 101
Non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents
Song, M.-S., Son, Y.-D., & Lee, K.-H. (2014) · Journal of Power Electronics · doi:10.6113/jpe.2014.14.4.649 · Cited by 56
Metadata
- Authors
- Hsieh, Y.-P., Chen, J.-F., Yang, L.-S., Wu, C.-Y., & Liu, W.-S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-01
- Volume
- 61
- Issue
- 1
- Pages
- 210-222
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1987835347
- Cited by
- 206
- References
- 4
- FWCI
- 12.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.