The DOI matches its Crossref record.
Operation of a Six-Phase Induction Machine Using Series-Connected Machine-Side Converters
Open accessAbstract
This paper discusses the operation of a multiphase system, which is aimed at both variable-speed drive and generating (e.g., wind energy) applications, using back-to-back converter structure with dual three-phase machine-side converters. In the studied topology, an asymmetrical six-phase induction machine is controlled using two three-phase two-level voltage source converters connected in series to form a cascaded dc link. The suggested configuration is analyzed, and a method for dc-link midpoint voltage balancing is developed. Voltage balancing is based on the use of additional degrees of freedom that exist in multiphase machines and represents entirely new utilization of these degrees. The validity of the topology and its control is verified by simulation and experimental results on a laboratory-scale prototype, thus proving that it is possible to achieve satisfactory dc-link voltage control under various operating scenarios.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
High-power wind energy conversion systems: State-of-the-art and emerging technologies
Yaramasu, V., Wu, B., Sen, P. C., Kouro, S., & Narimani, M. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2378692 · Cited by 991
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2447733 · Cited by 927
Self-citationLevi, E. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2434999 · Cited by 661
Self-citationRecent Advances in the Design, Modeling, and Control of Multiphase Machines—Part II
Duran, M. J., & Barrero, F. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2448211 · Cited by 658
Self-citationA Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives
Munim, W. N. W. A., Duran, M. J., Che, H. S., Bermudez, M., Gonzalez-Prieto, I., & Rahim, N. A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2632118 · Cited by 292
Self-citation
Metadata
- Authors
- Che, H. S., Levi, E., Jones, M., Duran, M. J., Hew, W.-P., & Rahim, N. A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-01
- Volume
- 61
- Issue
- 1
- Pages
- 164-176
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2127523348
- Cited by
- 163
- References
- 0
- FWCI
- 11.78
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Operation of a Six-Phase Induction Machine Using Series-Connected Machine-Side Converters. https://app.cochat.ai/papers/10.1109/tie.2013.2248338
- The paper
- Che, H. S., Levi, E., Jones, M., Duran, M. J., Hew, W.-P., & Rahim, N. A. (2014). Operation of a Six-Phase Induction Machine Using Series-Connected Machine-Side Converters. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2013.2248338
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.