The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives
Open accessAbstract
The fault tolerance of electric drives is highly appreciated at industry for security and economic reasons, and the inherent redundancy of six-phase machines provides the desired fault-tolerant capability with no extra hardware. For this reason some recent research efforts have been focused on the fault-tolerant design, modeling, and control of six-phase machines. Nevertheless, a unified and conclusive analysis of the postfault capability of six-phase machine is still missing. This paper provides a full picture of the postfault derating in generic six-phase machines and a specific analysis of the fault-tolerant capability of the three mainstream six-phase induction machines (asymmetrical, symmetrical, and dual three phase). Experimental results confirm the theoretical post fault current limits and allow concluding, which is the best six-phase machine for each fault scenario and neutral arrangement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multiphase induction motor drives – a technology status review
Levi, E., Bojoi, R., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,619
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
Cao, W., Mecrow, B. C., Atkinson, G. J., Bennett, J. W., & Atkinson, D. J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165453 · Cited by 1,026
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2447733 · Cited by 927
Self-citationFry, H., Ketteridge, S., & Marshall, S. (2003) · doi:10.4324/9781315763088-11 · Cited by 758
Levi, E. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2434999 · Cited by 661
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part II
Duran, M. J., & Barrero, F. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2448211 · Cited by 658
Self-citationChe, H. S., Duran, M. J., Levi, E., Jones, M., Hew, W.-P., & Rahim, N. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293195 · Cited by 394
Self-citationMultiphase machines and drives - Revisited
Levi, E., Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2493510 · Cited by 290
Self-citationGuzman, H., Duran, M. J., Barrero, F., Bogado, B., & Toral, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2289882 · Cited by 258
Self-citationGuzman, H., Duran, M. J., Barrero, F., Zarri, L., Bogado, B., Gonzalez Prieto, I., & Arahal, M. R. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2418732 · Cited by 231
Self-citation
Cited by
Luo, Y., & Liu, C. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2883665 · Cited by 84
Metadata
- Authors
- Munim, W. N. W. A., Duran, M. J., Che, H. S., Bermudez, M., Gonzalez-Prieto, I., & Rahim, N. A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-10
- Volume
- 32
- Issue
- 10
- Pages
- 7824-7836
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2550166006
- Cited by
- 292
- References
- 17
- FWCI
- 9.91
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives. https://app.cochat.ai/papers/10.1109/tpel.2016.2632118
- The paper
- Munim, W. N. W. A., Duran, M. J., Che, H. S., Bermudez, M., Gonzalez-Prieto, I., & Rahim, N. A. (2017). A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2016.2632118
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
