The Impact of Temperature and Switching Rate on the Dynamic Characteristics of Silicon Carbide Schottky Barrier Diodes and MOSFETs
Open accessThe DOI matches its Crossref record.
Abstract
Silicon carbide Schottky barrier diodes (SiC-SBDs) are prone to electromagnetic oscillations in the output characteristics. The oscillation frequency, peak voltage overshoot, and damping are shown to depend on the ambient temperature and the metal-oxide- semiconductor field-effect transistor (MOSFET) switching rate (dIDS/dt). In this paper, it is shown experimentally and theoretically that dIDS/dt increases with temperature for a given gate resistance during MOSFET turn-on and reduces with increasing temperature during turn-off. As a result, the oscillation frequency and peak voltage overshoot of the SiC-SBD increases with temperature during diode turn-off. This temperature dependence of the diode ringing reduces at higher dIDS/dt and increases at lower dIDS/dt. It is also shown that the rate of change of dIDS/dt with temperature (d2IDS/dtdT) is strongly dependent on RGand using fundamental device physics equations, this behavior is predictable. The dependence of the switching energy on dIDS/dt and temperature in 1.2-kV SiC-SBDs is measured over a wide temperature range (-75 °C to 200 °C). The diode switching energy analysis shows that the losses at low dIDS/dt are dominated by the transient duration and losses at high dIDS/dt are dominated by electromagnetic oscillations. The model developed and results obtained are important for predicting electromagnetic interference, reliability, and losses in SiC MOSFET/SBDs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
Arteaga, J. M., Aldhaher, S., Kkelis, G., Kwan, C., Yates, D. C., & Mitcheson, P. D. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2871188 · Cited by 181
“The forward voltage of silicon carbide diodes tends to increase with temperature [38], and therefore, in order to achieve good efficiencies at low couplings, we designed for a maximum of 70 ◦C at the rectifier board.”
BackgroundFarhadi, M., Yang, F., Pu, S., Vankayalapati, B. T., & Akin, B. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3049394 · Cited by 93
AC Power Cycling Test Setup and Condition Monitoring Tools for SiC-Based Traction Inverters
Farhadi, M., Vankayalapati, B. T., Sajadi, R., & Akin, B. (2023) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2023.3271251 · Cited by 24
“The switching parameters like turn-on delay time [90], [91], [92], turn-on di/dt [83], [93], [94], [95], turn-off delay time [70], [96], [97], and turn-off di/dt [95], are presented in the literature for junction temperature measurement of SiC MOSFETs.”
Background
Metadata
- Authors
- Jahdi, S., Alatise, O., Alexakis, P., Ran, L., & Mawby, P.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-01
- Volume
- 62
- Issue
- 1
- Pages
- 163-171
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2038936231
- Cited by
- 76
- References
- 0
- FWCI
- 3.54
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Impact of Temperature and Switching Rate on the Dynamic Characteristics of Silicon Carbide Schottky Barrier Diodes and MOSFETs. https://app.cochat.ai/papers/10.1109/tie.2014.2326999
- The paper
- Jahdi, S., Alatise, O., Alexakis, P., Ran, L., & Mawby, P. (2015). The Impact of Temperature and Switching Rate on the Dynamic Characteristics of Silicon Carbide Schottky Barrier Diodes and MOSFETs. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2014.2326999
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.