The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Heterogeneous Feature Models and Feature Selection Applied to Bearing Fault Diagnosis
Abstract
Distinct feature extraction methods are simultaneously used to describe bearing faults. This approach produces a large number of heterogeneous features that augment discriminative information but, at the same time, create irrelevant and redundant information. A subsequent feature selection phase filters out the most discriminative features. The feature models are based on the complex envelope spectrum, statistical time- and frequency-domain parameters, and wavelet packet analysis. Feature selection is achieved by conventional search of the feature space by greedy methods. For the final fault diagnosis, the k-nearest neighbor classifier, feedforward net, and support vector machine are used. Performance criteria are the estimated error rate and the area under the receiver operating characteristic curve (AUC-ROC). Experimental results are shown for the Case Western Reserve University Bearing Data. The main contribution of this paper is the strategy to use several different feature models in a single pool, together with feature selection to optimize the fault diagnosis system. Moreover, robust performance estimation techniques usually not encountered in the context of engineering are employed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
An introduction to ROC analysis
Fawcett, T. (2006) · Pattern Recognition Letters · doi:10.1016/j.patrec.2005.10.010 · Cited by 21,879
Nearest neighbor pattern classification
Cover, T., & Hart, P. (1967) · IEEE Transactions on Information Theory · doi:10.1109/tit.1967.1053964 · Cited by 16,936
An introduction to variable and feature selection
GuyonIsabelle, & ElisseeffAndré (2003) · Journal of Machine Learning Research · doi:10.5555/944919.944968 · Cited by 7,715
An Introduction to Variable and Feature Selection.
Guyon, I., & Elisseeff, A. (2003) · Cited by 6,576
A scaled conjugate gradient algorithm for fast supervised learning
Møller, M. F. (1993) · Neural Networks · doi:10.1016/s0893-6080(05)80056-5 · Cited by 4,052
A plant-wide industrial process control problem
Downs, J. J., & Vogel, E. F. (1993) · Computers & Chemical Engineering · doi:10.1016/0098-1354(93)80018-i · Cited by 3,348
Floating search methods in feature selection
Pudil, P., Novovičová, J., & Kittler, J. (1994) · Pattern Recognition Letters · doi:10.1016/0167-8655(94)90127-9 · Cited by 3,098
Yin, S., Ding, S. X., Haghani, A., Hao, H., & Zhang, P. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.06.009 · Cited by 1,294
Comparison of algorithms that select features for pattern classifiers
Kudo, M., & Sklansky, J. (2000) · Pattern Recognition · doi:10.1016/s0031-3203(99)00041-2 · Cited by 905
Evaluating Learning Algorithms: A Classification Perspective
Japkowicz, N., & Shah, M. (2011) · doi:10.1017/cbo9780511921803 · Cited by 767
Real-Time Implementation of Fault-Tolerant Control Systems With Performance Optimization
Yin, S., Luo, H., & Ding, S. X. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273477 · Cited by 644
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Gao, R. X., & Yan, R. (2011) · doi:10.1007/978-1-4419-1545-0 · Cited by 340
Bearing Fault Diagnosis Based on Multiscale Permutation Entropy and Support Vector Machine
Wu, S.-D., Wu, P.-H., Wu, C.-W., Ding, J.-J., & Wang, C.-C. (2012) · Entropy · doi:10.3390/e14081343 · Cited by 282
Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis
Toliyat, H. A., Nandi, S., Choi, S., & Kelk, H. M. (2012) · CERN Document Server (European Organization for Nuclear Research) · Cited by 263
Advanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines
Gritli, Y., Zarri, L., Rossi, C., Filippetti, F., Capolino, G.-A., & Casadei, D. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236992 · Cited by 193
Plastic Bearing Fault Diagnosis Based on a Two-Step Data Mining Approach
He, D., Li, R., & Zhu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2192894 · Cited by 143
Fault diagnosis of rolling element bearing using time-domain features and neural networks
Sreejith, B., Verma, A. K., & Srividya, A. (2008) · IEEE International Conference on Industrial and Information Systems (ICIIS) · doi:10.1109/iciinfs.2008.4798444 · Cited by 142
Bearing performance degradation assessment using locality preserving projections
Yu, J. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.12.079 · Cited by 117
Wu, S.-D., Wu, C.-W., Wu, T.-Y., & Wang, C.-C. (2013) · Entropy · doi:10.3390/e15020416 · Cited by 98
Boukra, T., Lebaroud, A., & Clerc, G. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2216242 · Cited by 91
Spectral Regression Based Fault Feature Extraction for Bearing Accelerometer Sensor Signals
Xia, Z., Xia, S., Wan, L., & Cai, S. (2012) · Sensors · doi:10.3390/s121013694 · Cited by 91
Fault diagnosis of rolling bearing based on wavelet transform and envelope spectrum correlation
Sun, W. H., Yang, G. A., Chen, Q., Palazoğlu, A., & Feng, K. (2012) · Journal of Vibration and Control · doi:10.1177/1077546311435348 · Cited by 85
Luo, J., Yu, D., & Liang, M. (2013) · Measurement Science and Technology · doi:10.1088/0957-0233/24/5/055009 · Cited by 80
Knowledge modeling – State of the art
Devedžić, V. (2001) · Integrated Computer-Aided Engineering · doi:10.3233/ica-2001-8307 · Cited by 72
Wang, Y., Kang, S., Jiang, Y., Yang, G., Song, L., & Микулович, В. И. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.11.015 · Cited by 69
Rolling bearing fault diagnostics using artificial neural networks based on Laplace wavelet analysis
Al-Raheem, K. F., & Abdul-Karem, W. (2011) · International Journal of Engineering Science and Technology · doi:10.4314/ijest.v2i6.63730 · Cited by 50
Liu, J. (2012) · Measurement Science and Technology · doi:10.1088/0957-0233/23/5/055604 · Cited by 48
Cited by
Feature selection in machine learning: A new perspective
Cai, J., Luo, J., Wang, S., & Yang, S. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.11.077 · Cited by 2,061
Guo, L., Lei, Y., Xing, S., Yan, T., & Li, N. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2877090 · Cited by 1,234
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
A transfer convolutional neural network for fault diagnosis based on ResNet-50
Wen, L., Li, X., & Gao, L. (2020) · Neural Computing and Applications · doi:10.1007/s00521-019-04097-w · Cited by 764
Han, T., Liu, C., Yang, W., & Jiang, D. (2020) · ISA Transactions · doi:10.1016/j.isatra.2019.08.012 · Cited by 578
Metadata
- Authors
- Rauber, T. W., de Assis Boldt, F., & Varejao, F. M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-01
- Volume
- 62
- Issue
- 1
- Pages
- 637-646
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2004039783
- Cited by
- 365
- References
- 29
- FWCI
- 26.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.