The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Advanced Induction Motor Rotor Fault Diagnosis Via Continuous and Discrete Time–Frequency Tools
Open accessAbstract
Transient-based fault diagnosis in induction motors has gained increasing attention over the recent years. This is due to its ability to avoid eventual wrong diagnostics of the conventional motor current signature analysis in certain industrial situations (presence of load toque oscillations, light loading conditions, and so on). However, the application of these transient methodologies requires the use of advanced signal processing tools. This paper presents a detailed comparison between the two main groups of transforms that are employed in transient analysis: discrete and continuous. This paper does not focus on trivial fault cases but on difficult real situations where the application of the conventional methods often leads to false diagnostics (outer bar breakages in double-cage motors, motors with rotor axial duct influence, and combined faults). Indeed, it is the first time that continuous tools are applied to some of these controversial situations. The results in this paper prove the special advantages of the continuous transforms, tearing down some false myths about their use.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Self-citation
Cited by
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
Yu, G., Yu, M., & Xu, C. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2696503 · Cited by 682
Multisynchrosqueezing Transform
Yu, G., Wang, Z., & Zhao, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868296 · Cited by 501
A review of stochastic resonance in rotating machine fault detection
Lu, S., He, Q., & Wang, J. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.06.032 · Cited by 382
Bearing fault detection by one-dimensional convolutional neural networks
Eren, L. (2017) · Mathematical Problems in Engineering · doi:10.1155/2017/8617315 · Cited by 250
Faiz, J., & Mazaheri-Tehrani, E. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2608950 · Cited by 207
Metadata
- Authors
- Pons-Llinares, J., Antonino-Daviu, J. A., Riera-Guasp, M., Bin Lee, S., Kang, T.-J., & Yang, C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-03
- Volume
- 62
- Issue
- 3
- Pages
- 1791-1802
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2094623746
- Cited by
- 180
- References
- 1
- FWCI
- 16.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.