Gear Tooth Surface Damage Fault Detection Using Induction Machine Stator Current Space Vector Analysis
The DOI matches its Crossref record.
Abstract
A noninvasive technique for the diagnosis of gear tooth surface damage faults based upon the stator current space vector analysis is presented. The torque oscillation profile produced by the gear tooth surface damage fault in the mechanical torque experimented by the driven electrical machine is primarily investigated. This profile consists of a mechanical impact generated by the fault followed by a damped oscillation that can be identified through the mechanical system torsional natural frequency and damping factor. Through theoretical developments, it is shown that the periodic behavior of this particular shape produces fault-related frequencies in the stator current and harmonics integer multiple of the rotation frequency in the stator current space vector instantaneous frequency. The fault signature related to the gear tooth surface damage fault is predicted through the numerical simulation. The simulation results are validated through experimental tests, illustrating a possible noninvasive gear tooth surface damage fault detection with a fault sensitivity comparable to invasive methods. A dedicated experimental setup, which is based on a 250-W squirrel-cage three-phase induction machine that is shaft connected to a single-stage gear, has been used for this purpose.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Azamfar, M., Singh, J., Bravo-Imaz, I., & Lee, J. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106861 · Cited by 353
Badihi, H., Zhang, Y., Jiang, B., Pillay, P., & Rakheja, S. (2022) · Proceedings of the IEEE · doi:10.1109/jproc.2022.3171691 · Cited by 319
Sun, W., Yao, B., Zeng, N., Chen, B., He, Y., Cao, X., & He, W. (2017) · Materials · doi:10.3390/ma10070790 · Cited by 117
“Typical gear faults include chipped teeth, tooth breakage, root crack, wear, pitting, and surface damage [3].”
BackgroundNovel Diagnostic Techniques for Rotating Electrical Machines—A Review
Frosini, L. (2020) · Energies · doi:10.3390/en13195066 · Cited by 67
“To overcome this problem, in [122], a noninvasive approach for the detection of gear tooth surface damage faults, focused on the stator current space vector analysis, is investigated, providing good results.”
A novel method based on self-sensing motor drive system for misalignment detection
Yao, Y., Li, Y., & Yin, Q. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.06.030 · Cited by 42
Metadata
- Authors
- Kia, S. H., Henao, H., & Capolino, G.-A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-03
- Volume
- 62
- Issue
- 3
- Pages
- 1866-1878
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2002291869
- Cited by
- 116
- References
- 0
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Gear Tooth Surface Damage Fault Detection Using Induction Machine Stator Current Space Vector Analysis. https://app.cochat.ai/papers/10.1109/tie.2014.2360068
- The paper
- Kia, S. H., Henao, H., & Capolino, G.-A. (2015). Gear Tooth Surface Damage Fault Detection Using Induction Machine Stator Current Space Vector Analysis. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2014.2360068
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.