The Modular Multilevel Converter for High Step-Up Ratio DC–DC Conversion
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
High step-up ratio dc-dc converters with megawatt ratings are of interest in wind turbine interfaces and high-voltage direct-current systems. This paper presents a modular multilevel dc-dc converter based on the standard boost converter topology but with the normal single switches replaced by a number of capacitor-clamped submodules. The converter is operated in resonant mode with resonance between submodule capacitors and the arm inductor. A phase-shifted switching arrangement is applied such that there is a constant number, i.e., N, of submodules supporting the high voltage at a time. In this operation mode, the step-up ratio is dependent on the number of submodules and the inductor charging ratio. The converter exhibits scalability without using a transformer and is capable of bidirectional power flow. An application example of a wind turbine interface with a 10 : 1 conversion ratio is demonstrated in simulation. The experimental verification of the concept using a lab-scale prototype is provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Isolated and Nonisolated DC-to-DC Converters for Medium-Voltage DC Networks: A Review
Alhurayyis, I., Elkhateb, A., & Morrow, J. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3028057 · Cited by 224
“[77], [79], [80], [82] Depends on the modules and inductor rate [82] Mediumhigh [79], [80]”
BackgroundMethodInfluentialDarwish, A., Elgenedy, M. A., Finney, S. J., Williams, B. W., & McDonald, J. R. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2772189 · Cited by 37
A Three-Level Modular DC/DC Converter Applied in High Voltage DC Grid
You, H., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2829703 · Cited by 34
Metadata
- Authors
- Zhang, X., & Green, T. C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-08
- Volume
- 62
- Issue
- 8
- Pages
- 4925-4936
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2023687593
- Cited by
- 138
- References
- 1
- FWCI
- 7.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.