The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Development of 1-MW Inductive Power Transfer System for a High-Speed Train
Abstract
Design and fabrication of a 1-MW inductive power transfer (IPT) system that supplies power to the vehicle in real time without any battery charge is proposed for a high-speed train. The IPT system consists of a 1-MW resonant inverter, a 128-m transmitter, four pickups, including rectifiers, and a wireless feedback network to maintain a constant output voltage of the pickups. The operating frequency of the system is 60 kHz to achieve efficient power transfer with a large air gap. The measured efficiency of the IPT system at the 818-kW output power of the pickups for the 5-cm air gap is 82.7%. The electromagnetic field and the induced voltage at the rail are also measured for safety evaluation. The fabricated IPT system was adapted to the high-speed train, and the train successfully accelerates to a speed of 10 km/h according to startup procedures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
Shin, J., Shin, S., Kim, Y., Ahn, S., Lee, S., Jung, G., Jeon, S.-J., & Cho, D.-H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2258294 · Cited by 856
Self-citationA Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems
Madawala, U. K., & Thrimawithana, D. J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114312 · Cited by 813
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160972 · Cited by 669
Self-citationHui, S. Y. R., & Ho, W. W. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.846550 · Cited by 501
Wireless Power Transmission With Self-Regulated Output Voltage for Biomedical Implant
Ahn, D., & Hong, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273472 · Cited by 315
Moon, S., Kim, B.-C., Cho, S.-Y., Ahn, C.-H., & Moon, G.-W. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301762 · Cited by 251
A New Concept: Asymmetrical Pick-Ups for Inductively Coupled Power Transfer Monorail Systems
Elliott, G. A. J., Covic, G. A., Kacprzak, D., & Boys, J. T. (2006) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2006.879619 · Cited by 172
Cited by
A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Wireless Charging Technologies: Fundamentals, Standards, and Network Applications
Lu, X., Wang, P., Niyato, D., Kim, D. I., & Han, Z. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2499783 · Cited by 968
Modern Advances in Wireless Power Transfer Systems for Roadway Powered Electric Vehicles
Mi, C. C., Buja, G., Choi, S. Y., & Rim, C. T. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2574993 · Cited by 841
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Metadata
- Authors
- Kim, J. H., Lee, B.-S., Lee, J.-H., Lee, S.-H., Park, C.-B., Jung, S.-M., Lee, S.-G., Yi, K.-P., & Baek, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-10
- Volume
- 62
- Issue
- 10
- Pages
- 6242-6250
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1975687896
- Cited by
- 482
- References
- 12
- FWCI
- 16.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of 1-MW Inductive Power Transfer System for a High-Speed Train. https://app.cochat.ai/papers/10.1109/tie.2015.2417122
- The paper
- Kim, J. H., Lee, B.-S., Lee, J.-H., Lee, S.-H., Park, C.-B., Jung, S.-M., Lee, S.-G., Yi, K.-P., & Baek, J. (2015). Development of 1-MW Inductive Power Transfer System for a High-Speed Train. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2015.2417122
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.