A Modified Modular Multilevel Converter With Reduced Capacitor Voltage Fluctuation
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The requirement of a large number of sizeable capacitors in traditional modular multilevel converter (MMC) submodules is seen as a major barrier hampering its widespread use in medium-voltage applications. To reduce the value of capacitance, this paper presents a modified MMC (M-MMC) topology, which offers inherent alleviated capacitor voltage fluctuations compared with traditional MMC. Its operating principle, modulation, and capacitor voltage balancing strategies are described in detail. Moreover, a novel capacitor voltage fluctuation suppression scheme is also proposed to further reduce the second-order capacitor voltage ripples. Finally, both a three-phase prototype of M-MMC and traditional MMC have been built in the laboratory. The effectiveness of the proposed M-MMC topology and control methods is experimentally verified by comparing with the traditional MMC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modular Multilevel Converter AC Motor Drives With Constant Torque From Zero to Nominal Speed
Antonopoulos, A., Angquist, L., Norrga, S., Ilves, K., Harnefors, L., & Nee, H.-P. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2286217 · Cited by 297 · cited 3×
“References [18] and [21]–[25] reduce the fundamental-frequency capacitor voltage fluctuation by simultaneously introducing a high-frequency circulating current in the phase legs of MMC and a high-frequency common-mode voltage at the ac terminals.”
BackgroundVasiladiotis, M., Cherix, N., & Rufer, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286293 · Cited by 174 · cited 2×
“In [29] and [30], real-time circulating current reference calculation is presented by directly dividing the instantaneous output power by dc bus voltage, but it is inaccurate as it ignores the power losses and parasitic parameters.”
Background
Cited by
Dekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
“Several new topologies such as passive cross-connected, active cross-connected arm-based MMCs, and modified MMC are presented in [175]–[177].”
Optimized Design and Control for Hybrid MMC With Reduced Capacitance Requirements
Dong, P., Lyu, J., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2869400 · Cited by 37
Yang, R., Li, B., Wang, G., Cecati, C., Zhou, S., & Xu, D. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2600762 · Cited by 37
Self-citation
Metadata
- Authors
- Li, B., Zhang, Y., Wang, G., Sun, W., Xu, D., & Wang, W.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-10
- Volume
- 62
- Issue
- 10
- Pages
- 6108-6119
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2019399165
- Cited by
- 124
- References
- 2
- FWCI
- 5.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.