Butler–Volmer-Equation-Based Electrical Model for High-Power Lithium Titanate Batteries Used in Electric Vehicles
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The lithium titanate battery, which uses Li4Ti5O12(LTO) as its anode instead of graphite, is a promising candidate for fast charging and power assist vehicular applications due to its attractive battery performance in rate characteristics and chemical stability. Unfortunately, commonly used battery models, including a large number of enhanced electrical models, become problematic when describing current-voltage characteristics of lithium titanate batteries. In this paper, a novel Butler-Volmer equation-based electric model is employed to outline unique phenomena induced by changing rates for high-power lithium titanate batteries. The robustness of the proposed model for three types of lithium titanate batteries under varying loading conditions, including galvanostatic test and Federal Urban Dynamic Schedule test, is evaluated and compared against experimental data. The experimental results of three types of lithium titanate batteries with common anode materials but differentiated cathode materials show good agreement with the model estimation results with maximum voltage errors below 2%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 3×
“2) It has been proved preferred for LiNMC batteries in [24], also appropriate for LFP batteries after adding a hysteresis component.”
BackgroundInfluential
Cited by
Meng, J., Luo, G., Ricco, M., Swierczynski, M., Stroe, D.-I., & Teodorescu, R. (2018) · Applied Sciences · doi:10.3390/app8050659 · Cited by 370
A Novel Fractional Order Model for State of Charge Estimation in Lithium Ion Batteries
Xiong, R., Tian, J., Shen, W., & Sun, F. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2880085 · Cited by 288
Battery state-of-charge estimation amid dynamic usage with physics-informed deep learning
Tian, J., Xiong, R., Lu, J., Chen, C., & Shen, W. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.06.007 · Cited by 278
Lithium-ion batteries health prognosis considering aging conditions
El Mejdoubi, A., Chaoui, H., Gualous, H., Van Den Bossche, P., Omar, N., & Van Mierlo, J. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2873247 · Cited by 186
xEV Li-Ion Battery Low-Temperature Effects—Review
Vidal, C., Gross, O., Gu, R., Kollmeyer, P., & Emadi, A. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2906487 · Cited by 187
Metadata
- Authors
- Liu, S., Jiang, J., Shi, W., Ma, Z., Wang, L. Y., & Guo, H.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-12
- Volume
- 62
- Issue
- 12
- Pages
- 7557-7568
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2082390999
- Cited by
- 108
- References
- 2
- FWCI
- 11.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Butler–Volmer-Equation-Based Electrical Model for High-Power Lithium Titanate Batteries Used in Electric Vehicles. https://app.cochat.ai/papers/10.1109/tie.2015.2449776
- The paper
- Liu, S., Jiang, J., Shi, W., Ma, Z., Wang, L. Y., & Guo, H. (2015). Butler–Volmer-Equation-Based Electrical Model for High-Power Lithium Titanate Batteries Used in Electric Vehicles. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2015.2449776
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.