The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
An Improved Exponential Model for Predicting Remaining Useful Life of Rolling Element Bearings
Abstract
The remaining useful life (RUL) prediction of rolling element bearings has attracted substantial attention recently due to its importance for the bearing health management. The exponential model is one of the most widely used methods for RUL prediction of rolling element bearings. However, two shortcomings exist in the exponential model: 1) the first predicting time (FPT) is selected subjectively; and 2) random errors of the stochastic process decrease the prediction accuracy. To deal with these two shortcomings, an improved exponential model is proposed in this paper. In the improved model, an adaptive FPT selection approach is established based on the 3σ interval, and particle filtering is utilized to reduce random errors of the stochastic process. In order to demonstrate the effectiveness of the improved model, a simulation and four tests of bearing degradation processes are utilized for the RUL prediction. The results show that the improved model is able to select an appropriate FPT and reduce random errors of the stochastic process. Consequently, it performs better in the RUL prediction of rolling element bearings than the original exponential model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking
Arulampalam, M. S., Maskell, S., Gordon, N., & Clapp, T. (2002) · IEEE Transactions on Signal Processing · doi:10.1109/78.978374 · Cited by 11,502
Sequential Monte Carlo Methods for Dynamic Systems
Liu, J. S., & Chen, R. (1998) · Journal of the American Statistical Association · doi:10.1080/01621459.1998.10473765 · Cited by 2,191
An Introduction to Sequential Monte Carlo Methods
Doucet, A., Freitas, N., & Gordon, N. (2001) · Sequential Monte Carlo Methods in Practice · doi:10.1007/978-1-4757-3437-9_1 · Cited by 1,119
PRONOSTIA : An experimental platform for bearings accelerated degradation tests.
Nectoux, P., Gouriveau, R., Medjaher, K., Ramasso, E., Chebel‐Morello, B., Noureddine Zerhouni, A., & Varnier, C. (2012) · HAL · Cited by 928
Residual-life distributions from component degradation signals: A Bayesian approach
GEBRAEEL, N. Z., LAWLEY, M. A., LI, R., & RYAN, J. K. (2005) · IIE Transactions · doi:10.1080/07408170590929018 · Cited by 788
Residual Life Predictions From Vibration-Based Degradation Signals: A Neural Network Approach
Gebraeel, N., Lawley, M., Liu, R., & Parmeshwaran, V. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.824875 · Cited by 557
Fault diagnosis of rotating machinery based on multiple ANFIS combination with gas
Lei, Y., He, Z., Zi, Y., & Hu, Q. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.11.003 · Cited by 500 · cited 1×
“development of faults, while RMS is able to reflect the increase of the vibration energy with the development of faults [33].”
BackgroundSelf-citationA particle-filtering approach for on-line fault diagnosis and failure prognosis
Orchard, M. E., & Vachtsevanos, G. J. (2009) · Transactions of the Institute of Measurement and Control · doi:10.1177/0142331208092026 · Cited by 463
Metrics for Offline Evaluation of Prognostic Performance
Saxena, A., Celaya, J., Saha, B., Saha, S., & Goebel, K. (2021) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2010.v1i1.1336 · Cited by 449
Tian, Z. (2009) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-009-0356-9 · Cited by 376
Cited by
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Self-citationA Hybrid Prognostics Approach for Estimating Remaining Useful Life of Rolling Element Bearings
Wang, B., Lei, Y., Li, N., & Li, N. (2020) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2882682 · Cited by 1,917
Self-citationA recurrent neural network based health indicator for remaining useful life prediction of bearings
Guo, L., Li, N., Jia, F., Lei, Y., & Lin, J. (2017) · Neurocomputing · doi:10.1016/j.neucom.2017.02.045 · Cited by 1,231
Self-citationA review on data-driven fault severity assessment in rolling bearings
Cerrada, M., Sánchez, R.-V., Li, C., Pacheco, F., Cabrera, D., Valente de Oliveira, J., & Vásquez, R. E. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.012 · Cited by 724
Zhang, Z., Si, X., Hu, C., & Lei, Y. (2018) · European Journal of Operational Research · doi:10.1016/j.ejor.2018.02.033 · Cited by 696
Self-citationLi, X., Zhang, W., & Ding, Q. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.11.011 · Cited by 582
Sun, C., Ma, M., Zhao, Z., Tian, S., Yan, R., & Chen, X. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2881543 · Cited by 519
Electric Locomotive Bearing Fault Diagnosis Using a Novel Convolutional Deep Belief Network
Shao, H., Jiang, H., Zhang, H., & Liang, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745473 · Cited by 488
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
Remaining Useful Life Prediction Based on a Double-Convolutional Neural Network Architecture
Yang, B., Liu, R., & Zio, E. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2924605 · Cited by 429
RUL Prediction of Deteriorating Products Using an Adaptive Wiener Process Model
Zhai, Q., & Ye, Z.-S. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2684821 · Cited by 363
Zhu, J., Chen, N., & Shen, C. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106602 · Cited by 318
Failure Prognosis and Applications—A Survey of Recent Literature
Kordestani, M., Saif, M., Orchard, M. E., Razavi-Far, R., & Khorasani, K. (2021) · IEEE Transactions on Reliability · doi:10.1109/tr.2019.2930195 · Cited by 305
Pan, Z., Meng, Z., Chen, Z., Gao, W., & Shi, Y. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106899 · Cited by 296
Guo, L., Lei, Y., Li, N., Yan, T., & Li, N. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.02.083 · Cited by 270
Self-citationA New Method Based on Stochastic Process Models for Machine Remaining Useful Life Prediction
Lei, Y., Li, N., & Lin, J. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2601004 · Cited by 253
Self-citationTran, K., Vu, H.-C., Pham, L., Boudaoud, N., & Nguyen, H.-S.-H. (2024) · Mathematics · doi:10.3390/math12101569 · Cited by 14
“In this paper, the 3 σ method, which has been recognized as a simple but efficient method to detect the FPT point according to the literature [39,40], is applied.”
Metadata
- Authors
- Li, N., Lei, Y., Lin, J., & Ding, S. X.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-12
- Volume
- 62
- Issue
- 12
- Pages
- 7762-7773
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2005523062
- Cited by
- 686
- References
- 34
- FWCI
- 21.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.