The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Dual-Transformer-Based Asymmetrical Triple-Port Active Bridge (DT-ATAB) Isolated DC–DC Converter
Abstract
In this paper, a dual-transformer-based asymmetrical triple-port active bridge converter (DT-ATAB) is proposed to interface two different dc-sources and a load. DT-ATAB consists of three active power electronic converters and two high-frequency transformers. All switches of these converters can be turned on with zero-voltage switching to reduce the switching losses. The bidirectional power flow operation is possible between the ports. The DT-ATAB also reduces the circulating powers between the ports for well-matched transformer turns ratios as compared to those in the other existing triple-port active bridge converters (TAB). Furthermore, the magnetic short-circuit conditions arising in the three-winding transformer of the TAB are mitigated in DT-ATAB. The principle of operation, steady-state analysis, various modes of operation (three-port and two-port modes), and a closed loop controller of DT-ATAB are presented. The theoretical analysis of this paper is verified using both simulation and experimental studies. The illustrated results show that DT-ATAB can be used as a promising multiport converter to interface the multiple sources and load to achieve wide-ranging outputs with the minimal losses.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Voltage and Power Balance Control for a Cascaded H-Bridge Converter-Based Solid-State Transformer
Zhao, T., Wang, G., Bhattacharya, S., & Huang, A. Q. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2216549 · Cited by 642 · cited 9×
“Consequently, the powers supplied from the source ports and the output voltage can be regulated by varying D13 and D23 [24].”
BackgroundInfluentialA natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices
Li, H., Peng, F. Z., & Lawler, J. S. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808965 · Cited by 296
Cited by
Review of Multiport Converters for Solar and Energy Storage Integration
Bhattacharjee, A. K., Kutkut, N., & Batarseh, I. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2830788 · Cited by 423
Development of a Power and Voltage Control Scheme for Multi-Port Solid State Transformers
Khayamy, M., Nasiri, A., & Altin, N. (2018) · 2018 7th International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2018.8567001 · Cited by 7
“Increasing renewable penetration to the grid and rising smart grid concept have made them popular for low to medium voltage level applications with their unique features such as VAR compensation, voltage regulation, fault isolation, and DC connectivity [5], [6].”
Background
Metadata
- Authors
- Jakka, V. N. S. R., Shukla, A., & Demetriades, G. D.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2017-06
- Volume
- 64
- Issue
- 6
- Pages
- 4549-4560
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2589551667
- Cited by
- 160
- References
- 2
- FWCI
- 4.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.