Temperature-Compensated Model for Lithium-Ion Polymer Batteries With Extended Kalman Filter State-of-Charge Estimation for an Implantable Charger
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
As implantable devices become more sophisticated and their extended functionalities impact their energy requirements, they not only rely on charging for the extra energy but also become ever more sensitive to battery deep discharge or overcharge. Accurate state-of-charge (SOC) estimation plays a fundamental role in ensuring the operation safety of implantable medical devices. Temperature variation can impact the battery model parameters and directly affect the accuracy of SOC estimation. This study investigates a temperature-compensated model for lithiumion polymer batteries that incorporates an extended Kalman filter method to estimate the state of the dynamic nonlinear system and its parameters, from 37 °C to 40 °C at intervals of 1 °C. Both simulation and experimental results indicate that the estimation error can be effectively limited to within ±3%. Through the accurate SOC estimation, the conventional constant current to constant voltage charging strategy is guided in order to reduce the charging time and increase the charging capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 1×
“Among them, the first-order RC model achieves good accuracy with minimal complexity [28].”
MethodZheng, F., Xing, Y., Jiang, J., Sun, B., Kim, J., & Pecht, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.010 · Cited by 574
Support Vector Machines Used to Estimate the Battery State of Charge
Álvarez Antón, J. C., García Nieto, P. J., Blanco Viejo, C., & Vilán Vilán, J. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2243918 · Cited by 512 · cited 1×
“Machine learning approaches have been used to estimate the online SOC, including artificial neural networks [4], [5], fuzzy modeling [6], [7], and support vector machines [8], [9].”
MethodLiu, X., Chen, Z., Zhang, C., & Wu, J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.02.072 · Cited by 235
El Mejdoubi, A., Oukaour, A., Chaoui, H., Gualous, H., Sabor, J., & Slamani, Y. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509916 · Cited by 170 · cited 14×
“These model parameter values are not always constant; they are highly sensitive to temperature [17]–[21].”
BackgroundInfluential
Cited by
Wang, Y., Tian, J., Sun, Z., Wang, L., Xu, R., Li, M., & Chen, Z. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110015 · Cited by 1,377
A brief review on key technologies in the battery management system of electric vehicles
Liu, K., Li, K., Peng, Q., & Zhang, C. (2019) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0516-8 · Cited by 635
Gao, W., Zheng, Y., Ouyang, M., Li, J., Lai, X., & Hu, X. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2838109 · Cited by 267
Elmahallawy, M., Elfouly, T., Alouani, A., & Massoud, A. M. (2022) · IEEE Access · doi:10.1109/access.2022.3221137 · Cited by 253
Current Trends for State-of-Charge (SoC) Estimation in Lithium-Ion Battery Electric Vehicles
Espedal, I. B., Jinasena, A., Burheim, O. S., & Lamb, J. J. (2021) · Energies · doi:10.3390/en14113284 · Cited by 177
“Overall, the extended Kalman filter’s accuracy depends not only on OCV function linearization, but on the model parameters also [78]; as a consequence, improved approaches can be classified into either model improvement of algorithm improvement [10].”
Background
Metadata
- Authors
- Lee, K.-T., Dai, M.-J., & Chuang, C.-C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2018-01
- Volume
- 65
- Issue
- 1
- Pages
- 589-596
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2735676453
- Cited by
- 136
- References
- 5
- FWCI
- 10.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Temperature-Compensated Model for Lithium-Ion Polymer Batteries With Extended Kalman Filter State-of-Charge Estimation for an Implantable Charger. https://app.cochat.ai/papers/10.1109/tie.2017.2721880
- The paper
- Lee, K.-T., Dai, M.-J., & Chuang, C.-C. (2018). Temperature-Compensated Model for Lithium-Ion Polymer Batteries With Extended Kalman Filter State-of-Charge Estimation for an Implantable Charger. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2017.2721880
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.