Priority Sorting Approach for Modular Multilevel Converter Based on Simplified Model Predictive Control
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
In this paper, a priority sorting approach based on simplified model predictive control (MPC) is proposed for modular multilevel converter (MMC). It aims at reducing the computational burden of conventional MPC method while maintaining the system performance, especially under high voltage levels. The proposed approach mainly consists of three parts, i.e., grid-side current control (GCC), circulating current control (CCC), and capacitor voltage balancing control (CVBC). The GCC and CCC are separately designed with simplified MPCs, avoiding the weight factor. Meanwhile, the redundant calculations are eliminated in GCC by considering the desired predicted output voltage of equivalent MMC model. To further minimize the optional combinations of the switching states, the CCC is constructed by utilizing the output of GCC and the arm current. Besides, a novel priority sorting approach is proposed for the CVBC to alleviate the sorting operation. The submodules are divided into three groups according to the detected capacitor voltages. Moreover, the groups are assigned with different priorities based on the arm current, and only one group needs the sorting process. Additionally, a reduced frequency approach is introduced to decrease the power loss in the steady state. The effectiveness of the proposed approach is validated by both simulation and experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 1×
“In [20], two PI controllers are employed to minimize the inner circulating current.”
MethodDesign and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455
Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406 · cited 1×
“rent, several methods have been proposed [19]–[21].”
Modular Multilevel Converter AC Motor Drives With Constant Torque From Zero to Nominal Speed
Antonopoulos, A., Angquist, L., Norrga, S., Ilves, K., Harnefors, L., & Nee, H.-P. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2286217 · Cited by 297 · cited 1×
“With the modular structure, it exhibits the merits of low switching frequency, bidirectional power flow, scalability, and high quality of the output voltage [3], [4].”
BackgroundVasiladiotis, M., Cherix, N., & Rufer, A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2286293 · Cited by 174 · cited 1×
“The GCC is analyzed and developed most often based on the linear system theory, where proportional–integral (PI) or proportional-resonant (PR) controllers are usually utilized [11], [12].”
Background
Cited by
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
“Recent MPC algorithms proposed in the literature employ three different stages to control the grid side current, circulating current and voltage balancing [79].”
MethodZhou, D., Yang, S., & Tang, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2863181 · Cited by 88
A Novel Two-Stage Model Predictive Control for Modular Multilevel Converter With Reduced Computation
Guo, P., He, Z., Yue, Y., Xu, Q., Huang, X., Chen, Y., & Luo, A. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868312 · Cited by 56
“In [7] and [8], a new kind of hierarchical strategy is presented, which divides the cost function into three parts and each part contains its own control objectives including the output currents, circulating currents, and SM capacitor voltage.”
Background
Metadata
- Authors
- Huang, J., Yang, B., Guo, F., Wang, Z., Tong, X., Zhang, A., & Xiao, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2018-06
- Volume
- 65
- Issue
- 6
- Pages
- 4819-4830
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2769968424
- Cited by
- 152
- References
- 5
- FWCI
- 7.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.