A New Convolutional Neural Network-Based Data-Driven Fault Diagnosis Method
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
Fault diagnosis is vital in manufacturing system, since early detections on the emerging problem can save invaluable time and cost. With the development of smart manufacturing, the data-driven fault diagnosis becomes a hot topic. However, the traditional data-driven fault diagnosis methods rely on the features extracted by experts. The feature extraction process is an exhausted work and greatly impacts the final result. Deep learning (DL) provides an effective way to extract the features of raw data automatically. Convolutional neural network (CNN) is an effective DL method. In this study, a new CNN based on LeNet-5 is proposed for fault diagnosis. Through a conversion method converting signals into two-dimensional (2-D) images, the proposed method can extract the features of the converted 2-D images and eliminate the effect of handcrafted features. The proposed method which is tested on three famous datasets, including motor bearing dataset, self-priming centrifugal pump dataset, and axial piston hydraulic pump dataset, has achieved prediction accuracy of 99.79%, 99.481%, and 100%, respectively. The results have been compared with other DL and traditional methods, including adaptive deep CNN, sparse filter, deep belief network, and support vector machine. The comparisons show that the proposed CNN-based data-driven fault diagnosis method has achieved significant improvements.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Very Deep Convolutional Networks for Large-Scale Image Recognition
Simonyan, K., & Zisserman, A. (2014) · arXiv · doi:10.48550/arxiv.1409.1556 · Cited by 114,148
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Going deeper with convolutions
Szegedy, C., Liu, W., Jia, Y., Sermanet, P., Reed, S., Anguelov, D., Erhan, D., Vanhoucke, V., & Rabinovich, A. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298594 · Cited by 48,562
Deep learning in neural networks: an overview
Schmidhuber, J. (2015) · Neural Networks · doi:10.1016/j.neunet.2014.09.003 · Cited by 18,570
Representation Learning: A Review and New Perspectives
Bengio, Y., Courville, A., & Vincent, P. (2013) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2013.50 · Cited by 13,001
Emergence of simple-cell receptive field properties by learning a sparse code for natural images
Olshausen, B. A., & Field, D. J. (1996) · Nature · doi:10.1038/381607a0 · Cited by 5,694 · cited 1×
“This was inspired by the concept of simple and complex cells in visual cortex in brain [34], and the”
MethodBeyond the hype: Big data concepts, methods, and analytics
Gandomi, A., & Haider, M. (2015) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2014.10.007 · Cited by 4,226
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135 · cited 1×
“2774777 methods [3].”
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Research works printed but not linked: 3
- henley, 0, Application of expert systems to fault diagnosis, Proc AIChE Annu Meeting
- aydmj, 1999, Pump failure determination using support vector data description, Advances in Intelligent Data Analysis, 415
- 10.1109/TIE.2015.2417501 · DOI · Paper page
Cited by
Items 501–600 of 1,003
Maggio, L. G. D. (2022) · Sensors · doi:10.3390/s23010211 · Cited by 45
“[32] developed a signal-to-image conversion method for training CNNs and Islam et al.”
MethodWang, H., & Li, Y. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109102 · Cited by 49
Deep Discriminative Representation Learning for Nonlinear Process Fault Detection
Jiang, Q., Yan, X., & Huang, B. (2019) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2019.2956087 · Cited by 49
“The CNN is generally employed to extract representations from a time-frequency spectrum or an image [27].”
MethodA novel normalized recurrent neural network for fault diagnosis with noisy labels
Nie, X., & Xie, G. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01608-8 · Cited by 43
Chen, S., Ge, H., Huang, L., Sun, Y., & Qian, X. (2020) · Measurement · doi:10.1016/j.measurement.2020.108257 · Cited by 43
Yuan, J., & Tian, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2947714 · Cited by 43
“CNN is more in line with the human brain’s way of thinking because, in the visual cortex of the brain, some cells are only sensitive to local receptive fields [14].”
Zhou, K., Sun, H., Enos, R. S., Zhang, D., & Tang, J. (2021) · Computational Materials Science · doi:10.1016/j.commatsci.2021.110663 · Cited by 40
A One-Dimensional Vision Transformer with Multiscale Convolution Fusion for Bearing Fault Diagnosis
Weng, C., Lu, B., & Yao, J. (2021) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-nanjing52125.2021.9612919 · Cited by 49
A $T^{2}$-Tensor-Aided Multiscale Transformer for Remaining Useful Life Prediction in IIoT
Ren, L., Jia, Z., Wang, X., Dong, J., & Wang, W. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3166790 · Cited by 41
“from time-series data and are widely adopted in industrial time-series forecasting-related problems [16].”
BackgroundReview of Fault Detection and Diagnosis Techniques for AC Motor Drives
Gultekin, M. A., & Bazzi, A. M. (2023) · Energies · doi:10.3390/en16155602 · Cited by 57
“Another approach is to convert physical signals to images and use strong image processing tools such as CNNs [17,68].”
BackgroundCM-YOLOv8: Lightweight YOLO for Coal Mine Fully Mechanized Mining Face
Fan, Y., Mao, S., Li, M., Wu, Z., & Kang, J. (2024) · Sensors · doi:10.3390/s24061866 · Cited by 45
“Alternatively, Convolutional Neural Networks (CNNs), such as LeNet [16], AlexNet [17], VGG [18], or deeper networks are employed for end-to-end feature learning and target detection of images from fully mechanized coal mine working faces [19].”
BackgroundFault diagnosis of industrial process using attention mechanism with 3DCNN-LSTM
Chen, Y., Zhang, R., & Gao, F. (2024) · Chemical Engineering Science · doi:10.1016/j.ces.2024.120059 · Cited by 45
Li, X., Wang, Y., Zhao, S., Yao, J., & Li, M. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.111761 · Cited by 45
Self-citationZhou, F., Hu, P., Yang, S., & Wen, C. (2018) · Sensors · doi:10.3390/s18103521 · Cited by 47
Fault Diagnosis of a Reciprocating Compressor Air Valve Based on Deep Learning
Xiao, S., Ang, N., Zhang, Z., Liu, S., Song, M., & Zhang, H. (2020) · Applied Sciences · doi:10.3390/app10186596 · Cited by 41
“[23] applied a CNN with a LeNet-5 architecture to convert the original vibration signal into an image.”
MethodMulti-task learning of classification and denoising (MLCD) for noise-robust rotor system diagnosis
Ko, J. U., Jung, J. H., Kim, M., Kong, H. B., Lee, J., & Youn, B. D. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103385 · Cited by 46
Adding interpretability to predictive maintenance by machine learning on sensor data
Steurtewagen, B., & den Poel, D. V. (2021) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2021.107381 · Cited by 50
Luo, J., Zhu, L., Li, Q., Liu, D., & Chen, M. (2021) · Processes · doi:10.3390/pr9101751 · Cited by 41
A Fault Diagnosis Approach Based on 2D-Vibration Imaging for Bearing Faults
Mishra, R. K., Choudhary, A., Fatima, S., Mohanty, A. R., & Panigrahi, B. K. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00735-1 · Cited by 40
Deng, Q., Gou, B., Ge, X., Lin, C., Xie, D., & Feng, X. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3238009 · Cited by 45
“feedforward networks [29], convolutional NNs [30], and deep”
BackgroundAutomated Design of Fault Diagnosis CNN Network for Satellite Attitude Control Systems
Zhao, H., Liu, M., Sun, Y., Chen, Z., Duan, G., & Cao, X. (2024) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2024.3384443 · Cited by 40
“They focused on image classification techniques to diagnose faults, showcasing the versatility of CNNs in interpreting visual data representations of diagnostic information [19].”
BackgroundRaj, K. K., Kumar, S., & Kumar, R. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-024-09866-x · Cited by 64
“The next study [100] leveraged the benefits of CNN’s image processing, specifically in the domain of computer vision, to convert vibration signals into two-dimensional (2D) images.”
Fault Detection of Permanent Magnet Synchronous Motor Based on Deep Learning Method
Luo, Y., Qiu, J., & Shi, C. (2018) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems.2018.8549129 · Cited by 41
“However, the large amount of computation and the lack of data samples is the difficulty of these solutions [10-14].”
BackgroundXia, S., Zhang, J., Ye, S., Bing Hong, X. U., Huang, W., & Xiang, J. (2019) · IEEE Access · doi:10.1109/access.2019.2958141 · Cited by 39
“based on the convolutional neural network [12] and image”
MethodKou, L., Liu, C., Cai, G., Zhang, Z., Zhou, J., & Wang, X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.01.023 · Cited by 42
Direct Connection-Based Convolutional Neural Network (DC-CNN) for Fault Diagnosis of Rotor Systems
Kim, M., Jung, J. H., Ko, J. U., Kong, H. B., Lee, J., & Youn, B. D. (2020) · IEEE Access · doi:10.1109/access.2020.3024544 · Cited by 43
Enhanced Lightweight Multiscale Convolutional Neural Network for Rolling Bearing Fault Diagnosis
Shi, Y., Deng, A., Deng, M., Zhu, J., Liu, Y., & Cheng, Q. (2020) · IEEE Access · doi:10.1109/access.2020.3041735 · Cited by 40
“Some researchers [13]–[15] convert one-dimensional (1D) signals into two-dimensional (2D) images, and then feed them into 2DCNN to achieve diagnostic results.”
BackgroundFault Diagnosis of Complex Chemical Processes Using Feature Fusion of a Convolutional Network
Wang, N., Li, H., Wu, F., Zhang, R., & Gao, F. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c05739 · Cited by 42
Ye, Z., & Yu, J. (2021) · Neurocomputing · doi:10.1016/j.neucom.2021.02.055 · Cited by 40
He, Y., Shi, H., Tan, S., Song, B., & Zhu, J. (2021) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2021.04.062 · Cited by 38
Xing, L., Wen, Y., Xiao, S., Zhang, D., & Zhang, J. (2021) · IEEE Transactions on Electromagnetic Compatibility · doi:10.1109/temc.2021.3131670 · Cited by 39
Bindi, M., Corti, F., Grasso, F., Luchetta, A., Manetti, S., Piccirilli, M. C., & Reatti, A. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3153827 · Cited by 44
“The recent diffusion of artificial intelligence in the industrial sector has led to the development of monitoring systems based on neural networks [6] and other machine learning algorithms [7], focusing on the data-driven approach.”
BackgroundA Bearing Fault Diagnosis Method Using Multi-Branch Deep Neural Network
Nguyen, V., Hoang, D.-T., Tran, X.-T., Van, M., & Kang, H. (2021) · Machines · doi:10.3390/machines9120345 · Cited by 40
“It can be observed that in the worst case (−8 dB), the methods in [24,26,42] totally fail since their accuracy is under 50%.”
BackgroundMethodInfluentialDas, A. K., Das, S. K., Pradhan, A. K., Chatterjee, B., & Dalai, S. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3234467 · Cited by 38
“As the concept of CNN is well established hence detailed theoretical background about CNN is skipped in this article; however, more information about CNN can be obtained from [10], [11], [12], [13], and [22].”
BackgroundMethodInfluentialChu, K., Liu, R., & Duan, G. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101918 · Cited by 38
Edge Solution for Real-Time Motor Fault Diagnosis Based on Efficient Convolutional Neural Network
An, K., Lu, J., Zhu, Q., Wang, X., de Silva, C. W., Xia, M., & Lu, S. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3276513 · Cited by 38
“LeNet5 CNN can extract features and eliminate the influence of handcrafted features [12].”
BackgroundFault Diagnosis of Cascaded Multilevel Inverter Using Multiscale Kernel Convolutional Neural Network
Sivapriya, A., Kalaiarasi, N., Verma, R., Bharatiraja, C., & Munda, J. L. (2023) · IEEE Access · doi:10.1109/access.2023.3299852 · Cited by 38
“In [17], the author introduces a new technique that utilizes a one-dimensional (1D) residual CNN model to address the challenges associated with training difficulty and performance degradation.”
MethodBond Graph-CNN based hybrid fault diagnosis with minimum labeled data
Dash, B. M., Bouamama, B. O., Boukerdja, M., & Pékpé, K. M. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107734 · Cited by 46
Wang, H., Wang, X., Yang, Y., Gryllias, K., & Liu, Z. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3352689 · Cited by 42
“Wen et al. [14] first converted the fault vibration signals into images, and then a LeNet-5-based 2-”
BackgroundResearch on Wind Turbine Fault Detection Based on CNN-LSTM
Qi, L., Zhang, Q., Xie, Y., Zhang, J., & Ke, J. (2024) · Energies · doi:10.3390/en17174497 · Cited by 38
An SDP Characteristic Information Fusion‐Based CNN Vibration Fault Diagnosis Method
Zhu, X., Zhao, J., Hou, D., & Han, Z. (2019) · Shock and Vibration · doi:10.1155/2019/3926963 · Cited by 41
Research on TE process fault diagnosis method based on DBN and dropout
Wei, Y., & Weng, Z. (2020) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23750 · Cited by 38
An Weighted CNN Ensemble Model with Small Amount of Data for Bearing Fault Diagnosis
Han, S., & Jeong, J. (2020) · Procedia Computer Science · doi:10.1016/j.procs.2020.07.015 · Cited by 41
Yan, X., Zhang, C.-A., & Liu, Y. (2020) · Measurement · doi:10.1016/j.measurement.2020.108778 · Cited by 40
Ahmed, H., & Nandi, A. K. (2021) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-021-00553-8 · Cited by 42
Zhang, B., & Shang, P. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3088415 · Cited by 39
WDA: An Improved Wasserstein Distance-Based Transfer Learning Fault Diagnosis Method
Zhu, Z., Wang, L., Peng, G., & Li, S. (2021) · Sensors · doi:10.3390/s21134394 · Cited by 42
“DCTLN as a transfer learning method designed for fault diagnosis showed its superiority over general transfer learning algorithms such as DCC and DANN.”
InfluentialWu, H., Yang, S., Liu, X., Xu, C., Lu, H., Wang, C., Qin, K., Wang, Z., Rao, Y., & Olaribigbe, A. O. (2021) · Journal of Lightwave Technology · doi:10.1109/jlt.2021.3102265 · Cited by 38
Bearing fault diagnosis by combining a deep residual shrinkage network and bidirectional LSTM
Tong, Y., Wu, P., He, J., Zhang, X., & Zhao, X. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/ac37eb · Cited by 40
“For example, Wen et al [16] extracted the features from an image converted by the raw signals, then used a LeNet-5-based CNN method to identify the fault.”
Multisensor-Driven Motor Fault Diagnosis Method Based on Visual Features
Tang, Y., Zhang, X., Huang, S. H., Qin, G., He, Y., Qu, Y., Xie, J., Zhou, J., & Long, Z. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3201011 · Cited by 38
“[14] also employed the CNN to extract features from 2-D images which are converted from raw signals.”
MethodA Novel Lightweight Relation Network for Cross-Domain Few-Shot Fault Diagnosis
Tang, T., Qiu, C., Yang, T., Wang, J., Zhao, J., Chen, M., Wu, J., & Wang, L. (2022) · Measurement · doi:10.1016/j.measurement.2023.112697 · Cited by 38
Djaballah, S., Meftah, K., Khelil, K., & Sayadi, M. (2023) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-023-01645-4 · Cited by 40
“[19] converted vibration signals into two dimensional (2-D) images and used them in the improved CNN model, which achieved significant improvements.”
MethodXu, Y., Chen, Y., Zhang, H., Feng, K., Wang, Y., Yang, C., & Ni, Q. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110724 · Cited by 44
Chen, G., Xiang, D., Liu, T., Xu, F., & Li, W. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2024.112180 · Cited by 41
Gao, B., Xu, J., Zhang, H., Liu, Y., & Chang, X. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.08.075 · Cited by 39
Li, K., Zhang, R., Li, F., Su, L., Wang, H., & Chen, P. (2019) · IEEE Access · doi:10.1109/access.2019.2901363 · Cited by 38
“to select a more effective diagnosis method [25]–[27].”
MethodYin, Z., Wang, L., Zhang, Y., & Gao, Y. (2019) · Electronics · doi:10.3390/electronics8040396 · Cited by 37
“In References [47,48], the fault features were extracted based on this matrix construction method and the fault detection was successfully achieved.”
MethodSelf-citationYang, H.-B., Zhang, J.-A., Chen, L., Zhang, H., & Liu, S. (2019) · Mathematical Problems in Engineering · doi:10.1155/2019/6921975 · Cited by 37
GKP Signal Processing Using Deep CNN and SVM for Tongue-Machine Interface
Görür, K., Bozkurt, M. R., Bascil, M. S., & Temurtaş, F. (2019) · Traitement du signal · doi:10.18280/ts.360404 · Cited by 39
“The CNN structure has three major layers consisting of the convolutional layer, pooling layer, and a fully connected layer [27, 35].”
BackgroundA Deep Learning framework for simulation and defect prediction applied in microelectronics
Dimitriou, N., Leontaris, L., Vafeiadis, T., Ioannidis, D., Wotherspoon, T., Tinker, G., & Tzovaras, D. K. (2019) · Simulation Modelling Practice and Theory · doi:10.1016/j.simpat.2019.102063 · Cited by 43
“In [19], a convolutional neural network based on LeNet-5 [34] is proposed for fault diagnosis, where the input is the converted signal(s) in a two-dimensional image.”
BackgroundMethodAn Integrated Deep Learning Method towards Fault Diagnosis of Hydraulic Axial Piston Pump
Tang, S., Yuan, S., Zhu, Y., & Li, G. (2020) · Sensors · doi:10.3390/s20226576 · Cited by 37
“Due to the limitations of traditional machine learning in feature extraction and model training, deep learning (DL) based technology motivates the investigation of intelligent fault diagnosis [19–21].”
BackgroundMethodSkowron, M., Orłowska-Kowalska, T., & Kowalski, C. T. (2021) · IET Electric Power Applications · doi:10.1049/elp2.12066 · Cited by 37
“First, on Figure 10 the classification problem in the multiclass task is demonstrated in a way similar to [42].”
ResultJiang, Y., Xia, L., & Zhang, J. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3131706 · Cited by 40
Hierarchical Multiscale Dense Networks for Intelligent Fault Diagnosis of Electromechanical Systems
Xu, Y., Yan, X., Sun, B., & Liu, Z. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3150872 · Cited by 40
Zhu, P. Y., Dong, S., Pan, X., Hu, X., & Zhu, S. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac57ef · Cited by 42
“Wen et al [7] proposed a method to convert one-dimensional (1D) vibration signals of REBS to two-dimensional (2D) grayscale images, and used an improved LeNet-5 network to diagnose REBS faults.”
Yang, D., Karimi, H. R., & Pawełczyk, M. (2023) · Control Engineering Practice · doi:10.1016/j.conengprac.2023.105475 · Cited by 36
Jiang, L., Wei, L., Wang, S., Guo, S., & Li, Y. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107179 · Cited by 38
An Explainable and Lightweight Improved 1-D CNN Model for Vibration Signals of Rotating Machinery
Pang, P., Tang, J., Luo, J., Miao, C., Yuan, H., & Jiang, L. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3327783 · Cited by 37
“D CNN includes maximum pooling, average pooling, and GAP [39], which are mainly used to reduce the feature dimension of the input signal and prevent overfitting [40].”
MethodGao, T., Zhu, H., Wu, J., Yuan, Q., & Li, Z. (2025) · Applied Soft Computing · doi:10.1016/j.asoc.2025.113472 · Cited by 37
A new fault diagnosis method based on convolutional neural network and compressive sensing
Ma, Y., Jia, X., Bai, H., Liu, G., Wang, G., Guo, C., & Wang, S. (2019) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-019-1007-5 · Cited by 38
Riaz, N., Shah, S. I. A., Rehman, F., Gilani, S. O., & Udin, E. (2020) · IEEE Access · doi:10.1109/access.2020.3004489 · Cited by 41
“Other techniques used for comparison include Support Vector Machine (SVM) trained with raw signal data using time-domain feature parameters [21] and LeNet [40].”
MethodA self-Adaptive CNN with PSO for bearing fault diagnosis
Chen, J., Jiang, J., Guo, X., & Tan, L. (2020) · Systems Science & Control Engineering · doi:10.1080/21642583.2020.1860153 · Cited by 37
“Hence, there are totally 12 classes of (Jiang et al., 2018) 96.53 12 HCNN (Wen et al., 2019) 99.82 10 CNN-Vibration image (Wen et al., 2018) 99.79 10 Sparse filter (Lei et al., 2016) 99.66 10 CNN-PSO-WP (Fuan et al., 2017) 99.71 8 CNN-Wavelet 96 × 96 (Verstraete et al., 2017) 99.8 4 CNN-STFT96 × 96…”
MethodInfluentialA Novel Bearing Fault Diagnosis Method Using Spark-Based Parallel ACO-K-Means Clustering Algorithm
Wan, L., Zhang, G., Li, H., & Li, C. (2021) · IEEE Access · doi:10.1109/access.2021.3059221 · Cited by 40
“on the data-driven rolling bearing fault diagnosis, such as random forest (RF) [2], k-nearest neighbor [3], support vector machine [4], back propagation neural network [5], improved LeNet-5 network [6], deep convolutional neural network [7]–[9], deep recurrent neural network [10], deep residual learning [11], deep aut…”
BackgroundZhao, B., Zhang, X., Zhan, Z., Wu, Q., & Zhang, H. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3121691 · Cited by 36
Fault diagnosis of rolling bearing based on online transfer convolutional neural network
Xu, Q., Bo, Z., Huo, H., Meng, Z., Li, J., Fan, F., & Cao, L. (2022) · Applied Acoustics · doi:10.1016/j.apacoust.2022.108703 · Cited by 40
Wang, H., Liu, Z., & Ai, T. (2022) · Journal of Dynamics Monitoring and Diagnostics · doi:10.37965/jdmd.2022.53 · Cited by 37
“According to the experimental results, the NL-1DCNN achieves a diagnostic accuracy of 99.67% at SNR = 6dB, which is 1.41% higher than that of Wen-CNN.”
MethodInfluentialAhmed, H., & Nandi, A. K. (2023) · Machines · doi:10.3390/machines11070746 · Cited by 43
Advanced Bearing-Fault Diagnosis and Classification Using Mel-Scalograms and FOX-Optimized ANN
Siddique, M., Zaman, W., Ullah, S., Umar, M. I., Saleem, F., Shon, D., Yoon, T. H., Yoo, D.-S., & Kim, J.-M. (2024) · Sensors · doi:10.3390/s24227303 · Cited by 39
Data Integrity Monitoring Method of Digital Sensors for Internet-of-Things Applications
Liu, G., Shi, L., & Xin, D.-J. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.2967504 · Cited by 35
“See https://www.ieee.org/publications/rights/index.html for more information. can be trained by deep neural networks [30], convolutional neural network [31], etc.”
BackgroundChen, P., Li, Y., Wang, K., & Zuo, M. J. (2020) · Measurement · doi:10.1016/j.measurement.2020.107739 · Cited by 37
Zhou, B., Cheng, C., Ma, G., & Zhang, Y. A. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/895/1/012006 · Cited by 43
Self-citationWang, W., Zhou, Q., Tian, G., Wang, Y., Zhao, Z., & Cao, F. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.04.001 · Cited by 35
Zhang, S., Xu, F., Hu, M., Zhang, L., Liu, H., & Li, M. (2021) · Measurement · doi:10.1016/j.measurement.2021.109337 · Cited by 35
Liao, H., Cai, W., Cheng, F., Dubey, S., & Rajesh, P. (2021) · Sensors · doi:10.3390/s21134358 · Cited by 35
“Additionally, the 1D data can be applied with CNN for condition monitoring and fault diagnosis [29–31].”
MethodA rolling bearing fault diagnosis method using novel lightweight neural network
He, D., Liu, C., Chen, Y., Jin, Z., Li, X., & Shan, S. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/ac1a5e · Cited by 35
“Since most traditional data-driven fault diagnosis methods cannot directly extract the feature of original signal data, data preprocessing becomes really important [18].”
Self-citationChen, X., Wang, S., Liu, H., Yang, J., Liu, S., & Wang, W. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/ac3709 · Cited by 35
“First, we converted the inferior colliculus auditory signal of each CF into a gray image [33], as shown in figure 7.”
Sumba, J. P. C., Alonso-Valerdi, L. M., & Ibarra-Zárate, D. I. (2022) · Applied Sciences · doi:10.3390/app12042158 · Cited by 45
Toma, R. N., Piltan, F., Im, K., Shon, D., Yoon, T. H., Yoo, D.-S., & Kim, J.-M. (2022) · Sensors · doi:10.3390/s22134881 · Cited by 38
“Further, the authors showed that the converted 2-D grayscale images could produce different patterns among various fault types, and then various CNN models were applied to automatically extract features and classify them [53,54].”
MethodMa, Y., Wen, G., Cheng, S., He, X., & Mei, S. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac7eb0 · Cited by 41
“Wen et al firstly converted the raw time-series signal into a 2D grayscale image, and then took the 2D grayscale image of the signal as an input while using LeNet-5 CNN to complete three different mechanical diagnosis tasks [3].”
Xu, Z., Tang, G., & Pang, B. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3192300 · Cited by 36
Zhang, Q., Li, J., Ding, W., Ye, Z., & Meng, Z. (2022) · Measurement · doi:10.1016/j.measurement.2022.112345 · Cited by 36
Wang, G., Zhang, Y., Zhang, F., & Wu, Z. (2023) · Measurement · doi:10.1016/j.measurement.2023.112806 · Cited by 36
Self-citationMulti-Source Separation Under Two “Blind” Conditions for Fiber-Optic Distributed Acoustic Sensor
Wu, H., Liu, Y., Tu, Y., Sun, Y., Gan, D., Song, Y., & Rao, Y. (2022) · Journal of Lightwave Technology · doi:10.1109/jlt.2022.3142020 · Cited by 34
Deep transfer learning strategy for efficient domain generalisation in machine fault diagnosis
Asutkar, S., & Tallur, S. G. (2023) · Scientific Reports · doi:10.1038/s41598-023-33887-5 · Cited by 48
Öner, M. Ü., Şahin, İ., & Keysan, O. (2023) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2023.3274052 · Cited by 38
Liu, F., Chen, L., Guo, Z., Zhao, W., Huang, X., Zhou, Q., & Cong, F. (2024) · Measurement · doi:10.1016/j.measurement.2024.114955 · Cited by 38
Yang, H., Song, Y., Wang, D., Xing, J., & Li, Y. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.110312 · Cited by 39
MRS-kNN fault detection method for multirate sampling process based variable grouping threshold
Feng, J. Y., & Li, K. (2019) · Journal of Process Control · doi:10.1016/j.jprocont.2019.11.007 · Cited by 35
Mao, Q., Zhu, Y., Lv, C., Lu, Y., Yan, X., Yan, S., & Liu, J. (2020) · Optics Express · doi:10.1364/oe.384146 · Cited by 34
Detection and Assessment of I&C Cable Faults Using Time–Frequency R-CNN-Based Reflectometry
Lee, C.-K., & Shin, Y. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2970677 · Cited by 38
Metadata
- Authors
- Wen, L., Li, X., Gao, L., & Zhang, Y.
- Affiliations
- State Key Laboratory of Digital Manufacturing Equipment and Technology (CN)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2018-07
- Volume
- 65
- Issue
- 7
- Pages
- 5990-5998
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2768753204
- Cited by
- 2,222
- References
- 40
- Citations by year
- 2026: 200 · 2025: 242 · 2024: 321 · 2023: 353 · 2022: 318 · 2021: 311 · 2020: 279 · 2019: 167 · 2018: 31
- FWCI
- 81.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Funders
- Natural Science Foundation of China (NSFC) (51435009, 51775216, 51711530038)
- China Postdoctoral Science Foundation (2017M622414)
- 111 Project (B16019)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- data-driven fault diagnosis, convolutional neural networks, LeNet-5, signal-to-image conversion, automatic feature extraction, smart manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.