The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A Wide-Range High-Voltage-Gain Bidirectional DC–DC Converter for V2G and G2V Hybrid EV Charger
Abstract
This article proposes a new wide-range bidirectional dc–dc converter that has an improved voltage gain transfer ratio for use in electric vehicle (EV) applications. The converter preserves the common electrical ground between input and output terminals, and presents a low-voltage stress of switches, high utilization factor, and high efficiency. The proposed EV charger performance is evaluated for a bidirectional power flow in grid-connected vehicle-to-grid (V2G) and grid-to-vehicle (G2V) modes. The converter uses a dead-beat current controller in the dc–dc and dc–ac stages, which has a smooth, accurate, and fast response. Finally, experimental results for a 500 W, 40–200 V prototype are provided under a bidirectional power flow in a closed-loop system in the presence of the proposed dead-beat controllers. The obtained results substantiate the theoretical analysis and the applicability of this structure. The converter exhibits the capability for EV battery charging/discharging and demonstrates a peak efficiency of 97.2% and 96.8% in the step-down and step-up modes of operation, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Three-level bidirectional converter for fuel-cell/battery hybrid power system
Jin, K., Yang, M., Ruan, X., & Xu, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031197 · Cited by 245
Study of a non-isolated bidirectional DC–DC converter
Lin, C. ‐., Yang, L. ‐., & Wu, G. W. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0338 · Cited by 180 · cited 3×
“In addition, the bidirectional topologies presented in [5], [6], [10], [15], [17], [18], [22], and [25] do not have a common ground between the input and output terminals, which produces an additional dv/dt issue between the input and output grounds.”
BackgroundZhang, Y., Liu, Q., Gao, Y., Li, J., & Sumner, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2850020 · Cited by 178 · cited 2×
“Recently, a number of new high-voltage-gain bidirectional dc–dc converters have been presented in [16]–[18].”
BackgroundAn Electrolytic Capacitorless Bidirectional EV Charger for V2G and V2H Applications
Kwon, M., & Choi, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2630711 · Cited by 177
Flores Cortez, D., Waltrich, G., Fraigneaud, J., Miranda, H., & Barbi, I. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350454 · Cited by 101 · cited 2×
“The practical voltage gain in the step-up and step-down modes of converters in [4]–[7], [10], [13], [14],and [20]–[23] is relatively low.”
BackgroundA novel high‐conversion‐ratio bidirectional three‐phase DC–DC converter
Wang, F., Wang, Y., Zhang, F., & Teng, C. (2019) · The Journal of Engineering · doi:10.1049/joe.2018.8782 · Cited by 14
Cited by
Dutta, S., & Bauman, J. (2024) · IEEE Access · doi:10.1109/access.2024.3435463 · Cited by 37
Metadata
- Authors
- Heydari-doostabad, H., & O'Donnell, T.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2022-05
- Volume
- 69
- Issue
- 5
- Pages
- 4718-4729
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W3168088845
- Cited by
- 196
- References
- 6
- FWCI
- 9.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Wide-Range High-Voltage-Gain Bidirectional DC–DC Converter for V2G and G2V Hybrid EV Charger. https://app.cochat.ai/papers/10.1109/tie.2021.3084181
- The paper
- Heydari-doostabad, H., & O'Donnell, T. (2022). A Wide-Range High-Voltage-Gain Bidirectional DC–DC Converter for V2G and G2V Hybrid EV Charger. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2021.3084181
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.