The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Model Predictive Direct Torque Control With Finite Control Set for PMSM Drive Systems, Part 2: Field Weakening Operation
Abstract
The direct torque control approach called model predictive direct torque control (MP-DTC) is extended to field-weakening operation in this research. The controller is of the finite control set (FCS) type, which takes the discrete states of the voltage source inverter (VSI) into account. Each sampling period, the future behavior of the plant is predicted and inputs (voltage vectors) are selected using an optimization criterion, i.e., a cost function. Optimization, however, depend on the operation region. Maximum torque per ampere (MTPA) tracking for high electrical efficiency is aimed below rated speed, operation off the MTPA trajectory is necessary for obtaining field-weakening. In this work, a cost function is designed, which is suitable for operation at high speeds without penalizing operation below rated speed. MP-DTC is applied to permanent magnet synchronous machine (PMSM) drive systems. High control performances, i.e., dynamics, is obtained without increasing the switching frequency nor reducing significantly the torque quality. This feature is interesting above all for high power applications. The proposed control strategy has been evaluated on a small-scale (PMSM) drive system with two-level VSI for demonstration showing promising results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Approach to Linear Filtering and Prediction Problems
Kalman, R. E. (1960) · Journal of Basic Engineering · doi:10.1115/1.3662552 · Cited by 31,751
Cited by
Making the Case for Electrified Transportation
Bilgin, B., Magne, P., Malysz, P., Yang, Y., Pantelic, V., Preindl, M., Korobkine, A., Jiang, W., Lawford, M., & Emadi, A. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2437338 · Cited by 455
Self-citationA Simplified Finite-Control-Set Model-Predictive Control for Power Converters
Xia, C., Liu, T., Shi, T., & Song, Z. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2284558 · Cited by 423
Finite-Control-Set MPC for Open-Phase Fault-Tolerant Control of PM Synchronous Motor Drives
Kiselev, A., Catuogno, G. R., Kuznietsov, A., & Leidhold, R. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2931285 · Cited by 88
Metadata
- Authors
- Preindl, M., & Bolognani, S.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2013-05
- Volume
- 9
- Issue
- 2
- Pages
- 648-657
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2036905665
- Cited by
- 235
- References
- 1
- FWCI
- 9.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Model Predictive Direct Torque Control With Finite Control Set for PMSM Drive Systems, Part 2: Field Weakening Operation. https://app.cochat.ai/papers/10.1109/tii.2012.2220353
- The paper
- Preindl, M., & Bolognani, S. (2013). Model Predictive Direct Torque Control With Finite Control Set for PMSM Drive Systems, Part 2: Field Weakening Operation. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2012.2220353
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.