Hybrid Multilevel Converter: Capacitor Voltage Balancing Limits and its Extension
The DOI matches its Crossref record.
Abstract
This paper presents theoretical analysis of a network fault tolerant hybrid cascaded multilevel converter when operated as one unit using multilevel pulse width modulation. The analysis establishes the modulation index range where the voltage balance of the H-bridge floating capacitors of the hybrid converter is attainable independent of load power factors. To realize the established modulation range, a new modulation strategy is proposed that exploits third harmonic subtraction modification of the reference voltage in order to extend the regions around zero voltage crossing where the cells capacitor voltage balancing can be achieved, with a minimum number of cells; independent of load power factor. The significance of the proposed modulation strategy is that it permits increased utilization of dc link voltage independent of operating condition over an extended modulation linear range. Therefore this hybrid converter is applicable to real and reactive power applications, with a higher power density than existing multilevel converters. The validity of the theoretical analysis and proposed extended modulation index linear range are confirmed using simulations and experimentations. The presented analysis and proposed modulation linear range extension can be extended to a hybrid converter with a large number of series H-bridge cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Dekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
Leon, J. I., Vazquez, S., & Franquelo, L. G. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2726583 · Cited by 481
Vahedi, H., Labbé, P.-A., & Al-Haddad, K. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2491260 · Cited by 283
Enhanced Modular Multilevel Converter With Reduced Number of Cells and Harmonic Content
Vozikis, D., Adam, G. P., Rault, P., Despouys, O., Holliday, D., & Finney, S. J. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2904205 · Cited by 23
“reduced footprint and semiconductor losses [22], [23].”
Self-citation
Metadata
- Authors
- Zhang, Y., Adam, G. P., Lim, T. C., Finney, S. J., & Williams, B. W.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2013-11
- Volume
- 9
- Issue
- 4
- Pages
- 2063-2073
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2079077241
- Cited by
- 89
- References
- 0
- FWCI
- 2.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.