Data-Driven System Reliability and Failure Behavior Modeling Using FMECA
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
System reliability modeling needs a large amount of data to estimate the parameters. In addition, reliability estimation is associated with uncertainty. This paper aims to propose a new method to evaluate the failure behavior and reliability of a large system using failure modes, effects, and criticality analysis (FMECA). Therefore, qualitative data based on the judgment of experts are used when data are not sufficient. The subjective data of failure modes and causes have been aggregated through the system to develop an overall failure index (OFI). This index not only represents the system reliability behavior, but also prioritizes corrective actions based on improvements in system failure. In addition, two optimization models are presented to select optimal actions subject to budget constraint. The associated costs of each corrective action are considered in risk evaluation. Finally, a case study of a manufacturing line is introduced to verify the applicability of the proposed method in industrial environments. The proposed method is compared with conventional FMECA approach. It is shown that the proposed method has a better performance in risk assessment. A sensitivity analysis is provided on the budget amount and the results are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An integrated structural framework to cost-based FMECA: The priority-cost FMECA
Carmignani, G. (2009) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2008.09.009 · Cited by 150 · cited 4×
“To reach this goal, the frequency factor which is p roposed in [12] as the percentage of occurring a failure cause can be employed as the occurrence rate.”
BackgroundMethodInfluentialApplying the concept of exponential approach to enhance the assessment capability of FMEA
Chang, K.-H., Chang, Y.-C., & Lai, P.-T. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-013-0747-9 · Cited by 81
Cited by
Application of Bayesian Networks in Reliability Evaluation
Cai, B., Kong, X., Liu, Y., Lin, J., Yuan, X., Xu, H., & Ji, R. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2858281 · Cited by 275
Failure modes, mechanisms and effect analysis on temperature redundant sensor stage
Catelani, M., Ciani, L., & Venzi, M. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.08.013 · Cited by 72
Hybrid Intelligence Failure Analysis for Industry 4.0: A Literature Review and Future Prospective
Mokhtarzadeh, M., Rodríguez-Echeverría, J., Semanjski, I., & Gautama, S. (2025) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02376-5 · Cited by 35
“…2022, 2021), heuristics and/or new frameworks (Camarillo et al., 2018; Yang et al., 2009, 2020; Snooke & Price, 2012; Xu & Dang, 2023; Rokach & Hutter, 2012; Wang et al., 2018; Hecht & Baum, 2019; Yang & Liu, 1998; Liu & Ke, 2007), and mathematical optimization methods (Khorshidi et al., 2015).”
InfluentialRisk Analysis Using Failure Modes, Effects, and Criticality Analysis for Transmission Network Assets
Suwanasri, C., Saribut, S., Suwanasri, T., & Phadungthin, R. (2021) · Energies · doi:10.3390/en14040977 · Cited by 18
Metadata
- Authors
- Khorshidi, H. A., Gunawan, I., & Ibrahim, M. Y.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2016-06
- Volume
- 12
- Issue
- 3
- Pages
- 1253-1260
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2410001329
- Cited by
- 45
- References
- 2
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Data-Driven System Reliability and Failure Behavior Modeling Using FMECA. https://app.cochat.ai/papers/10.1109/tii.2015.2431224
- The paper
- Khorshidi, H. A., Gunawan, I., & Ibrahim, M. Y. (2016). Data-Driven System Reliability and Failure Behavior Modeling Using FMECA. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2015.2431224
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.