The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
A Two-Stage Data-Driven-Based Prognostic Approach for Bearing Degradation Problem
Abstract
Prognostics of the remaining useful life (RUL) has emerged as a critical technique for ensuring the safety, availability, and efficiency of a complex system. To gain a better prognostic result, degradation information is quite useful because it can reflect the health status of a system. However, due to the lack of accurate information about the plants' degradation, the prognostic model is usually not well established. To solve this problem, this paper proposes a two-stage strategy that is in the context of data-driven modeling to predict the future health status of a bearing, where the degradation information was estimated by calculating the deviation of multiple statistics of vibration signals of a bearing from a known healthy state. Then, a prediction stage based on an enhanced Kalman filter and an expectation-maximization algorithm were used to estimate the RUL of the bearing adaptively. To verify the effectiveness of the proposed approach, a real-bearing degradation problem was implemented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Remaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162
Maximum likelihood estimates of linear dynamic systems
RAUCH, H. E., TUNG, F., & STRIEBEL, C. T. (1965) · AIAA Journal · doi:10.2514/3.3166 · Cited by 1,943
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
He, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105
Prognostics and Health Management of Electronics
Pecht, M. G. (2008) · Wiley eBooks · doi:10.1002/9780470385845 · Cited by 847
Residual-life distributions from component degradation signals: A Bayesian approach
GEBRAEEL, N. Z., LAWLEY, M. A., LI, R., & RYAN, J. K. (2005) · IIE Transactions · doi:10.1080/07408170590929018 · Cited by 788
Remaining Useful Life Estimation Based on a Nonlinear Diffusion Degradation Process
Si, X.-S., Wang, W., Hu, C.-H., Zhou, D.-H., & Pecht, M. G. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2011.2182221 · Cited by 662
Modelling Accelerated Degradation Data Using Wiener Diffusion With A Time Scale Transformation
Whitmore, G. A., & Schenkelberg, F. (1997) · Lifetime Data Analysis · doi:10.1023/a:1009664101413 · Cited by 489
Si, X.-S., Wang, W., Hu, C.-H., Chen, M.-Y., & Zhou, D.-H. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.08.016 · Cited by 457
Prognostics and health management of electronics
Vichare, N. M., & Pecht, M. G. (2006) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2006.870387 · Cited by 433
Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant Analysis
Jin, X., Zhao, M., Chow, T. W. S., & Pecht, M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273471 · Cited by 423
Self-citationWiener processes with random effects for degradation data
Wang, X. (2010) · Journal of Multivariate Analysis · doi:10.1016/j.jmva.2008.12.007 · Cited by 394
Mis-Specification Analysis of Linear Degradation Models
Peng, C.-Y., & Tseng, S.-T. (2009) · IEEE Transactions on Reliability · doi:10.1109/tr.2009.2026784 · Cited by 374
Degradation Data Analysis Using Wiener Processes With Measurement Errors
Ye, Z.-S., Wang, Y., Tsui, K.-L., & Pecht, M. (2013) · IEEE Transactions on Reliability · doi:10.1109/tr.2013.2284733 · Cited by 365
Self-citationExtended Kalman Filtering for Remaining-Useful-Life Estimation of Bearings
Singleton, R. K., Strangas, E. G., & Aviyente, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336616 · Cited by 364
Enabling Health Monitoring Approach Based on Vibration Data for Accurate Prognostics
Javed, K., Gouriveau, R., Zerhouni, N., & Nectoux, P. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327917 · Cited by 351
An Adaptive Prognostic Approach via Nonlinear Degradation Modeling: Application to Battery Data
Si, X.-S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2393840 · Cited by 245
New clustering algorithm-based fault diagnosis using compensation distance evaluation technique
Lei, Y., He, Z., Zi, Y., & Chen, X. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.07.013 · Cited by 244
Self-citationOlivares, B. E., Cerda Munoz, M. A., Orchard, M. E., & Silva, J. F. (2013) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2215142 · Cited by 217
Soualhi, A., Razik, H., Clerc, G., & Doan, D. D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2274415 · Cited by 213
Condition monitoring and remaining useful life prediction using degradation signals: revisited
Chen, N., & Tsui, K. (2013) · IIE Transactions · doi:10.1080/0740817x.2012.706376 · Cited by 185
Self-citationReliability inference for field conditions from accelerated degradation testing
Liao, H., & Elsayed, E. A. (2006) · Naval Research Logistics (NRL) · doi:10.1002/nav.20163 · Cited by 177
Determination of burn‐in parameters and residual life for highly reliable products
Tseng, S., Tang, J., & Ku, I. (2002) · Naval Research Logistics (NRL) · doi:10.1002/nav.10042 · Cited by 159
Towards a General Condition Based Maintenance Model for a Stochastic Dynamic System
Wang, W., & Christer, A. H. (2000) · Journal of the Operational Research Society · doi:10.1057/palgrave.jors.2600863 · Cited by 145
A model to predict the residual life of aircraft engines based upon oil analysis data
Wang, W., & Zhang, W. (2005) · Naval Research Logistics (NRL) · doi:10.1002/nav.20072 · Cited by 108
A Two-Step Parametric Method for Failure Prediction in Hard Disk Drives
Wang, Y., Ma, E. W. M., Chow, T. W. S., & Tsui, K. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2264060 · Cited by 102
Self-citationA Bayesian Inventory Model Using Real‐Time Condition Monitoring Information
Li, R., & Ryan, J. K. (2010) · Production and Operations Management · doi:10.1111/j.1937-5956.2010.01200.x · Cited by 73
Tang, J., & Su, T. (2008) · Naval Research Logistics (NRL) · doi:10.1002/nav.20280 · Cited by 70
On‐line reliability estimation for individual components using statistical degradation signal models
Chinnam, R. B. (2002) · Quality and Reliability Engineering International · doi:10.1002/qre.453 · Cited by 57
Anomaly Detection of Light-Emitting Diodes Using the Similarity-Based Metric Test
Chang, M., Chen, C., Das, D., & PECHT, M. G. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2332116 · Cited by 50
Development of a prognostics and health management capability for the Joint Strike Fighter
Smith, G., Schroeder, J. B., Navarro, S., et al. (2002) · doi:10.1109/autest.1997.643994 · Cited by 47
A Monte Carlo method for the model-based estimation of nuclear reactor dynamics
Cadini, F., & Zio, E. (2007) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2007.03.017 · Cited by 23
Cited by
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
A Hybrid Prognostics Approach for Estimating Remaining Useful Life of Rolling Element Bearings
Wang, B., Lei, Y., Li, N., & Li, N. (2020) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2882682 · Cited by 1,917
A recurrent neural network based health indicator for remaining useful life prediction of bearings
Guo, L., Li, N., Jia, F., Lei, Y., & Lin, J. (2017) · Neurocomputing · doi:10.1016/j.neucom.2017.02.045 · Cited by 1,231
A review on data-driven fault severity assessment in rolling bearings
Cerrada, M., Sánchez, R.-V., Li, C., Pacheco, F., Cabrera, D., Valente de Oliveira, J., & Vásquez, R. E. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.012 · Cited by 724
Li, X., Zhang, W., & Ding, Q. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.11.011 · Cited by 582
Metadata
- Authors
- Wang, Y., Peng, Y., Zi, Y., Jin, X., & Tsui, K.-L.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2016-06
- Volume
- 12
- Issue
- 3
- Pages
- 924-932
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2319025975
- Cited by
- 344
- References
- 32
- FWCI
- 26.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.