The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Understanding and Learning Discriminant Features based on Multiattention 1DCNN for Wheelset Bearing Fault Diagnosis
Abstract
Recently, deep-learning-based fault diagnosis methods have been widely studied for rolling bearings. However, these neural networks are lack of interpretability for fault diagnosis tasks. That is, how to understand and learn discriminant fault features from complex monitoring signals remains a great challenge. Considering this challenge, this article explores the use of the attention mechanism in fault diagnosis networks and designs attention module by fully considering characteristics of rolling bearing faults to enhance fault-related features and to ignore irrelevant features. Powered by the proposed attention mechanism, a multiattention one-dimensional convolutional neural network (MA1DCNN) is further proposed to diagnose wheelset bearing faults. The MA1DCNN can adaptively recalibrate features of each layer and can enhance the feature learning of fault impulses. Experimental results on the wheelset bearing dataset show that the proposed multiattention mechanism can significantly improve the discriminant feature representation, thus the MA1DCNN outperforms eight state-of-the-arts networks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
(2008) · Journal of Machine Learning Research · Cited by 33,051
(2010) · Cited by 14,134
Hinton, G., Deng, L., Yu, D., Dahl, G., Mohamed, A.-R., Jaitly, N., Senior, A., Vanhoucke, V., Nguyen, P., Sainath, T., et al. (2012) · IEEE Signal Processing Magazine · doi:10.1109/msp.2012.2205597 · Cited by 10,260
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222 · cited 4×
“The eight deep learning networks are Wen-CNN [18], adaptive deep convolution neural network (ADCNN) [26] based on the 2DCNN, deep convolutional neural networks with wide first-layer kernels (WDCNN) [17], residual convolution neural network (ResCNN) [23] based on the 1DCNN, gated recurrent unit (GRU), recurrent neural n…”
BackgroundMethodInfluentialZhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning
Shao, S., McAleer, S., Yan, R., & Baldi, P. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2864759 · Cited by 1,635
Zhang, W., Li, C., Peng, G., Chen, Y., & Zhang, Z. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.022 · Cited by 1,421
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Cited by
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Wan, J., Li, X., Dai, H.-N., Kusiak, A., Martinez-Garcia, M., & Li, D. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3034808 · Cited by 382
Hakim, M., Omran, A. A. B., Ahmed, A. N., Al-Waily, M., & Abdellatif, A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2022.101945 · Cited by 305
Wang, H., Liu, Z., Peng, D., & Zuo, M. J. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110314 · Cited by 270
Self-citationLv, H., Chen, J., Pan, T., Zhang, T., Feng, Y., & Liu, S. (2022) · Measurement · doi:10.1016/j.measurement.2022.111594 · Cited by 261
Metadata
- Authors
- Wang, H., Liu, Z., Peng, D., & Qin, Y.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2020-09
- Volume
- 16
- Issue
- 9
- Pages
- 5735-5745
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2989818023
- Cited by
- 519
- References
- 30
- FWCI
- 20.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Understanding and Learning Discriminant Features based on Multiattention 1DCNN for Wheelset Bearing Fault Diagnosis. https://app.cochat.ai/papers/10.1109/tii.2019.2955540
- The paper
- Wang, H., Liu, Z., Peng, D., & Qin, Y. (2020). Understanding and Learning Discriminant Features based on Multiattention 1DCNN for Wheelset Bearing Fault Diagnosis. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2019.2955540
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.