Characterization of Frequency Stability

Abstract

Consider a signal generator whose instantaneous output voltage V(t) may be written as V(t) = [V0+ ??(t)] sin [2??v0t + s(t)] where V0and v0are the nominal amplitude and frequency, respectively, of the output. Provided that ??(t) and ??(t) = (d??/(dt) are sufficiently small for all time t, one may define the fractional instantaneous frequency deviation from nominal by the relation y(t) - ??(t)/2??voA proposed definition for the measure of frequency stability is the spectral density Sy(f) of the function y(t) where the spectrum is considered to be one sided on a per hertz basis. An alternative definition for the measure of stability is the infinite time average of the sample variance of two adjacent averages of y(t); that is, if yk= 1/t ???tk+r= y(tk) y(t) dt where ?? is the averaging period, tk+1= tk+ T, k = 0, 1, 2 ..., t0is arbitrary, and T is the time interval between the beginnings of two successive measurements of average frequency; then the second measure of stability is ??y2(??) ??? (yk+1- yk)2/2 where denotes infinite time average and where T = ??. In practice, data records are of finite length and the infinite time averages implied in the definitions are normally not available; thus estimates for the two measures must be used. Estimates of Sy(f) would be obtained from suitable averages either in the time domain or the frequency domain.