A Measurement Strategy to Assess the Optimal Design of an RFID-Based Navigation Aid
The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
Different solutions have been proposed to address orientation in indoor/outdoor environments and among them, radio frequency identification (RFID)-based systems represent a strategic choice for its reduced complexity and cost. Widespread practices to validate the behavior of RFID-based systems use specific metrics related to the addressed application, while a general strategy to assess technical performances of the RFID-based system is lacking. In this paper, a novel measurement approach is proposed to perform optimal choices in developing an RFID-based orientation system and to impartially assess its technical performances. A multivariate measurement strategy is suggested to fully investigate performances of the system as a function of a set of operating quantities (user-tag distance, tag height, and intertag distance). An analysis is also proposed, which aims to assess the system performances in terms of sensitivity and specificity. Moreover, the use of a synthetic index, representing the overall behavior of the system under investigation is addressed. A case of study is presented. The system uses transparent RFID tags positioned in the environment and an embedded system including an RFID reader, as well as a dedicated module to convey audio messages to end-users. Results highlight that the device sensitivity improves in the case of a high intertag distance while the specificity decreases for short intertag distance, which is also confirmed by the synthetic index proposed. Specifically, an optimal tag height of 1 m has been estimated, while best performances are obtained in the case of intertag distance and user-tag distance belonging to ranges [1.50-2.50] m and [0.40-1.60] m, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
LANDMARC: indoor location sensing using active RFID
Ni, L. M., Liu, Y., Lau, Y. C., & Patil, A. P. (2004) · Proceedings of the First IEEE International Conference on Pervasive Computing and Communications, 2003. (PerCom 2003). · doi:10.1109/percom.2003.1192765 · Cited by 2,323
LANDMARC: Indoor Location Sensing Using Active RFID
Ni, L. M., Liu, Y., Lau, Y. C., & Patil, A. P. (2004) · Wireless Networks · doi:10.1023/b:wine.0000044029.06344.dd · Cited by 1,420 · cited 1×
“[17] used an active RFID system, in which, by means of reference tags (called LANDMARC) and by”
MethodAn experimental system for auditory image representations
Meijer, P. B. L. (1992) · IEEE Transactions on Biomedical Engineering · doi:10.1109/10.121642 · Cited by 900
Assistive Technology for Visually Impaired and Blind People
(2008) · Springer eBooks · doi:10.1007/978-1-84628-867-8 · Cited by 426
A survey on indoor positioning systems
Mainetti, L., Patrono, L., & Sergi, I. (2014) · 2014 22nd International Conference on Software, Telecommunications and Computer Networks (SoftCOM) · doi:10.1109/softcom.2014.7039067 · Cited by 296
Wearable Assistive Devices for the Blind
Velázquez, R. (2010) · Lecture Notes in Electrical Engineering · doi:10.1007/978-3-642-15687-8_17 · Cited by 238
A Blind Navigation System Using RFID for Indoor Environments
Chumkamon, S., Tuvaphanthaphiphat, P., & Keeratiwintakorn, P. (2008) · 2008 5th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology · doi:10.1109/ecticon.2008.4600543 · Cited by 223 · cited 1×
“In particular, due to the low energy consumption and reduced complexity in terms of system design and deployment, RFID-based solution has attracted a lot of interest in the research community and has been widely used to implement the assisted navigation and indoor navigation systems; these solutions, despite requiring…”
BackgroundA Framework for Assessing RFID System Security and Privacy Risks
Rotter, P. (2008) · IEEE Pervasive Computing · doi:10.1109/mprv.2008.22 · Cited by 88 · cited 1×
“to assessing the effectiveness of an RFID system in terms of system security and privacy is presented in [24].”
BackgroundOptical Device Indicating a Safe Free Path to Blind People
Villanueva, J. A. L., & Farcy, R. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2011.2160910 · Cited by 77
Using Google Cloud Vision in assistive technology scenarios
Mulfari, D., Celesti, A., Fazio, M. C., Villari, M., & Puliafito, A. (2016) · IEEE Symposium on Computers and Communications (ISCC) · doi:10.1109/iscc.2016.7543742 · Cited by 73
Research works printed but not linked: 2
- 2018, ARRSN5
- 2018, ThingMagic M6e Micro-LTE (UHF) RAIN RFID
Cited by
Almadani, B., Orujov, F., Maskeliūnas, R., Damaševičius, R., & Venčkauskas, A. (2019) · Sensors · doi:10.3390/s19092114 · Cited by 89
“, microelectromechanical systems (MEMS) [7]; radio-frequency identification (RFID) systems [8] are very rare in artificial laboratory environments and in reality.”
BackgroundMaking Shopping Easy for People with Visual Impairment Using Mobile Assistive Technologies
Elgendy, M., Sik-Lanyi, C., & Kelemen, A. (2019) · Applied Sciences · doi:10.3390/app9061061 · Cited by 48
A Multimodal User Interface for an Assistive Robotic Shopping Cart
Ryumin, D., Kagirov, I., Axyonov, A., Pavliuk, N., Saveliev, A. I., Kipyatkova, I. S., Železný, M., Mporas, I., & Karpov, A. A. (2020) · Electronics · doi:10.3390/electronics9122093 · Cited by 38
Tachiquin, R., Velázquez, R., Del-Valle-Soto, C., Gutierrez, C. A., Carrasco, M., Fazio, R. D., Trujillo-León, A., Visconti, P., & Vidal‐Verdú, F. (2021) · Sensors · doi:10.3390/s21165274 · Cited by 38
“reported in [24] the use of Radio Frequency Identification (RFID) tags positioned in the environment and an RFID reader to assist the navigation of visually impaired people.”
BackgroundZhou, T., Xia, P., Zhu, Q., & Du, J. (2022) · Safety Science · doi:10.1016/j.ssci.2023.106100 · Cited by 27
Metadata
- Authors
- Ando, B., Baglio, S., Marletta, V., Crispino, R., & Pistorio, A.
- Affiliations
- University of Catania (IT)
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2019-07
- Volume
- 68
- Issue
- 7
- Pages
- 2356-2362
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2901188138
- Cited by
- 24
- References
- 29
- Citations by year
- 2023: 3 · 2022: 3 · 2021: 5 · 2020: 3 · 2019: 10
- FWCI
- 3.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Instrumentation and Measurement (publishedVersion)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › RFID technology advancements
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
- Social Sciences › Psychology › Experimental and Cognitive Psychology › Spatial Cognition and Navigation
- Keywords
- sensitivity and specificity, system performance evaluation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Measurement Strategy to Assess the Optimal Design of an RFID-Based Navigation Aid. https://app.cochat.ai/papers/10.1109/tim.2018.2879069
- The paper
- Ando, B., Baglio, S., Marletta, V., Crispino, R., & Pistorio, A. (2019). A Measurement Strategy to Assess the Optimal Design of an RFID-Based Navigation Aid. IEEE Transactions on Instrumentation and Measurement. https://doi.org/10.1109/tim.2018.2879069
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.