The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Tacholess Speed Estimation in Order Tracking: A Review With Application to Rotating Machine Fault Diagnosis
Abstract
Order tracking (OT), which is realized by signal sampling in equal-angle increment according to the measured rotating speed, is a powerful technique for rotating machine fault diagnosis under variable-speed condition. However, if the tachometer cannot be installed on the rotating machine or the speed signal is not available for some reasons, OT is difficult to be realized. This review summarizes recent advances in the development of tacholess speed estimation methods for OT with its applications to fault diagnosis. First, the basis of rotating speed estimation and OT is revisited. Then, the methods are categorized into three groups including vibration or sound signal, electrical motor current signal, and video stream according to the signal source from which the speed is estimated. The principle, implementation procedures, key techniques, along with the merits, and shortcuts of these methods are summarized and discussed in detail. Afterward, a contrastive case study using three kinds of methods is provided to intuitively illustrate the performances of OT along with the applications in motor bearing fault diagnosis. A bibliography of the recent publications related to this topic is also provided to facilitate the selection and improvement of the tacholess OT methods in fault diagnosis applications. Finally, the research prospects are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Self-citationMachinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Sensorless Vector and Direct Torque Control
Vas, P. (1998) · doi:10.1093/oso/9780198564652.001.0001 · Cited by 2,571
A review on empirical mode decomposition in fault diagnosis of rotating machinery
Lei, Y., Lin, J., He, Z., & Zuo, M. J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.09.015 · Cited by 1,886
Deep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Self-citationAdaptive speed identification for vector control of induction motors without rotational transducers
Schauder, C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.158829 · Cited by 1,125
ANALYSIS OF COMPUTED ORDER TRACKING
Fyfe, K. R., & Munck, E. D. S. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1996.0056 · Cited by 598
A review on electrical motors energy use and energy savings
Saidur, R. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.018 · Cited by 499
Machine vision algorithms and applications
(2008) · Choice Reviews Online · doi:10.5860/choice.46-0907 · Cited by 464
Prognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators
Wang, D., Tsui, K.-L., & Miao, Q. (2018) · IEEE Access · doi:10.1109/access.2017.2774261 · Cited by 455
A review of stochastic resonance in rotating machine fault detection
Lu, S., He, Q., & Wang, J. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.06.032 · Cited by 382
Self-citationWang, H., Li, S., Song, L., & Cui, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2018.12.013 · Cited by 338
Time-varying vibration decomposition and analysis based on the Hilbert transform
Feldman, M. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.12.058 · Cited by 290
Deng, W., Zhang, S., Zhao, H., & Yang, X. (2018) · IEEE Access · doi:10.1109/access.2018.2834540 · Cited by 282
Liu, J., & Shao, Y. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.03.007 · Cited by 231
Rolling element bearing fault diagnosis via fault characteristic order (FCO) analysis
Wang, T., Liang, M., Li, J., & Cheng, W. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.11.011 · Cited by 228
Combet, F., & Gelman, L. M. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.006 · Cited by 227
Cui, L., Huang, J., & Zhang, F. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2698359 · Cited by 223
An enhancement denoising autoencoder for rolling bearing fault diagnosis
Meng, Z., Zhan, X., Li, J., & Pan, Z. (2018) · Measurement · doi:10.1016/j.measurement.2018.08.010 · Cited by 214
A two-step procedure for estimation of instantaneous rotational speed with large fluctuations
Urbanek, J. K., Barszcz, T., & Antoni, J. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.05.009 · Cited by 210
Zheng, J., Cheng, J., & Yang, Y. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.09.013 · Cited by 206
Li, R., & He, D. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2011.2179819 · Cited by 201
Wang, S., Chen, X., Selesnick, I. W., Guo, Y., Tong, C., & Zhang, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.07.009 · Cited by 195
Matching Synchrosqueezing Wavelet Transform and Application to Aeroengine Vibration Monitoring
Wang, S., Chen, X., Tong, C., & Zhao, Z. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2613359 · Cited by 182
Wang, J., Peng, Y., & Qiao, W. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2571258 · Cited by 173
Huang, H., Baddour, N., & Liang, M. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.11.005 · Cited by 158
Zhao, M. J., Lin, J., Xu, X., & Lei, Y. (2013) · Sensors · doi:10.3390/s130810856 · Cited by 154
Feng, Z., Chen, X., & Wang, T. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.03.037 · Cited by 147
Li, C., Sánchez, R., Zurita, G., Cerrada, M., & Cabrera, D. R. (2015) · ISA Transactions · doi:10.1016/j.isatra.2015.10.014 · Cited by 141
Health Assessment of Rotating Machinery Using a Rotary Encoder
Zhao, M. J., & Lin, J. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739689 · Cited by 140
Shi, J., Liang, M., Necsulescu, D. S., & Guan, Y. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.01.015 · Cited by 139
Feng, Z., Qin, S., & Liang, M. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.06.041 · Cited by 130
Zimroz, R., Urbanek, J. K., Barszcz, T., Bartelmus, W., Millioz, F., & Martin, N. (2011) · Metrology and Measurement Systems · doi:10.2478/v10178-011-0066-4 · Cited by 116
Schmidt, S. P., Heyns, P. S., & de Villiers, J. P. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.07.053 · Cited by 115
Zhao, M. J., Jia, X., Lin, J., Lei, Y., & Lee, J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.04.033 · Cited by 111
Hu, Y., Tu, X., Li, F., Li, H., & Meng, G. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2017.08.003 · Cited by 111
Instrument fault detection and isolation: state of the art and new research trends
Betta, G., & Pietrosanto, A. (2000) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.836318 · Cited by 110
Lu, S., Wang, X., He, Q., Liu, F., & Liu, Y. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.09.012 · Cited by 109
Self-citationLu, S., He, Q., & Zhao, J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.02.046 · Cited by 97
Self-citationInstrument fault detection and isolation: state of the art and new research trends
Betta, G., & Pietrosanto, A. (2002) · Conference proceedings - IEEE Instrumentation/Measurement Technology Conference · doi:10.1109/imtc.1998.679833 · Cited by 96
Envelope order tracking for fault detection in rolling element bearings
Guo, Y., Liu, T., Na, J., et al. (2012) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2012.07.026 · Cited by 95
Yu, J., & Lv, J. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2751878 · Cited by 95
Single and multi-stage phase demodulation based order-tracking
Coats, M. D., & Randall, R. B. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.016 · Cited by 94
Wang, Y., Xu, G., Zhang, Q., Liú, D., & Jiang, K. (2015) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.03.018 · Cited by 91
Lu, S., He, Q., Zhang, H., & Kong, F. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.08.003 · Cited by 80
Self-citationLu, S., & Wang, X. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2703819 · Cited by 78
Self-citationSiegel, D., Atat, H. A., Shauche, V., Liao, L., Snyder, J., & Lee, J. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.01.003 · Cited by 73
Feng, Z., Chen, X., & Liang, M. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.02.047 · Cited by 69
Fuzzy Diagnosis Method for Rotating Machinery in Variable Rotating Speed
Wang, H., & Chen, P. (2010) · IEEE Sensors Journal · doi:10.1109/jsen.2010.2049103 · Cited by 62
Jiang, X., & Li, S. (2016) · Measurement · doi:10.1016/j.measurement.2016.09.009 · Cited by 60
Bonnardot, F., Randall, R. B., & Antoni, J. (2004) · The International Journal of Acoustics and Vibration · doi:10.20855/ijav.2004.9.2156 · Cited by 50
Wang, D., & Miao, Q. (2015) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.01.052 · Cited by 48
Zhao, M. J., Lin, J., Xu, X., et al. (2014) · Sensors · doi:10.3390/s141120320 · Cited by 48
Lu, S., Qin, Y., Hang, J., Zhang, B., & Wang, Q. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2852978 · Cited by 45
Self-citationA computer-vision-based rotating speed estimation method for motor bearing fault diagnosis
Wang, X., Guo, J., Lu, S., Shen, C., & He, Q. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa650a · Cited by 40
Self-citationNiu, J., Lu, S., Liu, Y., et al. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2883955 · Cited by 35
Self-citationVision-based measurement for rotational speed by improving Lucas–Kanade template tracking algorithm
Guo, J., Zhu, C., Lu, S., Zhang, D., & Zhang, C. (2016) · Applied Optics · doi:10.1364/ao.55.007186 · Cited by 34
Self-citationRotational Speed Measurement Through Image Similarity Evaluation and Spectral Analysis
Wang, T., Yan, Y. G., Wang, L., et al. (2018) · IEEE Access · doi:10.1109/access.2018.2866479 · Cited by 28
An Improved Time‐Frequency Analysis Method for Instantaneous Frequency Estimation of Rolling Bearing
Ma, Z., Ruan, W., Chen, M., et al. (2018) · Shock and Vibration · doi:10.1155/2018/8710190 · Cited by 26
Guo, J., Lu, S., Zhai, C., & He, Q. (2018) · Measurement Science and Technology · doi:10.1088/1361-6501/aa92d6 · Cited by 25
Self-citationA Study on Defect Identification of Planetary Gearbox under Large Speed Oscillation
Jiang, X., Li, S., & Wang, Q. (2016) · Mathematical Problems in Engineering · doi:10.1155/2016/5289698 · Cited by 20
Self-citationDynamic signal analysis for speed-varying machinery: A review
Zhao, M. S., & Jing, L. I. N. (2015) · Scientia Sinica Technologica · doi:10.1360/n092014-00425 · Cited by 18
Tacholess order-tracking approach for wind turbine gearbox fault detection
Wang, Y., Xie, Y. G., Xu, G., Zhang, S., & Hou, C. (2017) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-017-0452-z · Cited by 16
Estimation of speed and armature temperaturein a brushed DC driveusing the extended Kalman filter
Acarnley, P. P., & Al-Tayie, J. K. (1997) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19970927 · Cited by 15
Luo, J., Zhang, S., Zhong, M., & Lin, Z. (2016) · Shock and Vibration · doi:10.1155/2016/2976389 · Cited by 15
Cited by
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Self-citationAn Improved Quantum-Inspired Differential Evolution Algorithm for Deep Belief Network
Deng, W., Liu, H., Xu, J., Zhao, H., & Song, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2983233 · Cited by 429
Edge Computing on IoT for Machine Signal Processing and Fault Diagnosis: A Review
Lu, S., Lu, J., An, K., Wang, X., & He, Q. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3239944 · Cited by 295
Self-citationWang, X., Lu, S., Huang, W., Wang, Q., Zhang, S., & Xia, M. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3051668 · Cited by 65
Self-citation
Metadata
- Authors
- Lu, S., Yan, R., Liu, Y., & Wang, Q.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2019-07
- Volume
- 68
- Issue
- 7
- Pages
- 2315-2332
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2934649617
- Cited by
- 271
- References
- 66
- FWCI
- 11.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.