CoChat

Detecting the Early Damages in Structures With Nonlinear Output Frequency Response Functions and the CNN-LSTM Model

Zhao, Baoxuan, Cheng, Changming, Peng, Zhike, Dong, Xingjian, Meng, Guang · 2020 · IEEE Transactions on Instrumentation and Measurement
Cited by 107

The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.

Abstract

Frames, shells, and hybrid structures with early damages, such as early cracks, often behave as extremely weak nonlinear systems, among which the nonlinearity is difficult to be detected, especially if the system response is affected by the noise. To avoid these damages becoming catastrophic failures, developing effective incipient damages detection methods is important. The nonlinear output frequency response functions (NOFRFs) and associated indexes can be considered as one kind of the prospective detection tools, which are usually determined from the established nonlinear autoregressive with exogenous inputs (NARX) model. However, the hyperparameters in the NARX model are difficult to be determined so that the identification accuracy cannot be guaranteed. Therefore, it is important to develop more accurate methods to estimate the NOFRFs and their associated indicators for damage detection. Motivated by the powerful learning abilities of convolutional neural networks (CNN) and long short-term memory (LSTM) networks, a novel method based on NOFRFs and the CNN-LSTM model for detecting the early damages in structures is proposed. By applying the beat excitation, the response of the structure is divided into two components, where the approximately linear component is used to estimate the frequency characteristic of the linear component by the classical linear model and the nonlinear component is used to establish the CNN-LSTM model. By calculating the responses of the two models, the NOFRFs and associated indexes can be accurately estimated, and then the early damage can be detected. Simulation and experimental studies verify the potential and effectiveness of the novel method proposed in this article.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/tim.2020.3005113

Cites

8 of 8 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 107

Metadata

Authors
Zhao, B., Cheng, C., Peng, Z., Dong, X., & Meng, G.
Venue
IEEE Transactions on Instrumentation and Measurement
Published
2020-12
Volume
69
Issue
12
Pages
9557-9567
ISSN
  • 0018-9456 (ISSN-L)
  • 1557-9662
OpenAlex
W3038956143
Cited by
107
References
8
FWCI
7.57
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.