The DOI matches its Crossref record.
Identification and Real-Time Control of an Electrohydraulic Servo System Based on Nonlinear Backstepping
Abstract
This paper studies the identification and the real-time control of an electrohydraulic servo system. The control strategy is based on the nonlinear backstepping approach. Emphasis is essentially on the tuning parameters effect and on how it influences the dynamic behavior of the errors. While the backstepping control ensures the global asymptotic stability of the system, the tuning parameters of the controller, nonetheless, do greatly affect the saturation and chattering in the control signal, and consequently, the dynamic errors. In fact, electrohydraulic systems are known to be highly nonlinear and non-differentiable due to many factors, such as leakage, friction, and especially, the fluid flow expression through the servo valve. These nonlinear terms appear in the closed loop dynamic errors. Their values are so large that in the presence of a poor design, they can easily overwhelm the effect of the controller parameters. Backstepping is used here because it is a powerful and robust nonlinear strategy. The experimental results are compared to those obtained with a real-time proportional-integral-derivative (PID) controller, to prove that classic linear controllers fail to achieve a good tracking of the desired output, especially, when the hydraulic actuator operates at the maximum load. Before going through the controller design, the system parameters are identified. Despite the nonlinearity of the system, identification is based on the recursive least squares method. This is done by rewriting the mathematical model of the system in a linear in parameters (LP) form. Finally, the experimental results will show the effectiveness of the proposed approach in terms of guaranteed stability and zero tracking error
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
High-Accuracy Tracking Control of Hydraulic Rotary Actuators With Modeling Uncertainties
Yao, J., Jiao, Z., Ma, D., & Yan, L. (2014) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2013.2252360 · Cited by 509
Adaptive Control of Hydraulic Actuators With LuGre Model-Based Friction Compensation
Yao, J., Deng, W., & Jiao, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2423660 · Cited by 339
Adaptive Backstepping Control of an Electrohydraulic Actuator
Ahn, K. K., Nam, D. N. C., & Jin, M. (2014) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2013.2265312 · Cited by 321
Won, D., Kim, W., Shin, D., & Chung, C. C. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2325895 · Cited by 294
Guo, Q., Zhang, Y., Celler, B. G., & Su, S. W. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2585080 · Cited by 257
Metadata
- Authors
- Kaddissi, C., Kenne, J.-P., & Saad, M.
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2007-02
- Volume
- 12
- Issue
- 1
- Pages
- 12-22
- ISSN
- 1083-4435 (ISSN-L)
- OpenAlex
- W2141645751
- Cited by
- 189
- References
- 0
- FWCI
- 21.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Identification and Real-Time Control of an Electrohydraulic Servo System Based on Nonlinear Backstepping. https://app.cochat.ai/papers/10.1109/tmech.2006.886190
- The paper
- Kaddissi, C., Kenne, J.-P., & Saad, M. (2007). Identification and Real-Time Control of an Electrohydraulic Servo System Based on Nonlinear Backstepping. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2006.886190
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.