The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Six-DOF Impedance Control of Dual-Arm Cooperative Manipulators
Open accessAbstract
In this paper, the problem of impedance control of dual-arm cooperative manipulators is studied. A general impedance control scheme is adopted, which encompasses a centralized impedance control strategy, aimed at conferring a compliant behavior at the object level, and a decentralized impedance control, enforced at the end-effector level, aimed at avoiding large internal loading of the object. Remarkably, the mechanical impedance behavior is defined in terms of geometrically consistent stiffness. The overall control scheme is based on a two-loop arrangement, where a simple proportional integral derivative inner motion loop is adopted for each manipulator, while an outer loop, using force and moment measurements at the robots wrists, is aimed at imposing the desired impedance behaviors. The developed control scheme is experimentally tested on a dual-arm setup composed of two 6-DOF industrial manipulators carrying a common object. The experimental investigation concerns the four different controller configurations that can be achieved by activating/deactivating the single impedance controllers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impedance Control: An Approach to Manipulation: Part I—Theory
Hogan, N. (1985) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3140702 · Cited by 3,673
Impedance Control: An Approach to Manipulation
Hogan, N. (1984) · 1984 American Control Conference · doi:10.23919/acc.1984.4788393 · Cited by 2,929
Object impedance control for cooperative manipulation: theory and experimental results
Schneider, S., & Cannon, R. H. (2003) · Proceedings, 1989 International Conference on Robotics and Automation · doi:10.1109/robot.1989.100124 · Cited by 273
Object impedance control for cooperative manipulation: theory and experimental results
Schneider, S. A., & Cannon, R. H. (1992) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.143355 · Cited by 272
Closed-loop manipulator control using quaternion feedback
Yuan, J. S. (1988) · IEEE Journal on Robotics and Automation · doi:10.1109/56.809 · Cited by 269
Six-DOF impedance control based on angle/axis representations
Caccavale, F., Natale, C., Siciliano, B., & Villani, L. (1999) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.760350 · Cited by 222
Self-citationStability of PID control for industrial robot arms
Rocco, P. (1996) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.508444 · Cited by 209
Internal force-based impedance control for cooperating manipulators
Bonitz, R. C., & Hsia, T. C. (1996) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.481752 · Cited by 204
Internal force-based impedance control for cooperating manipulators
Bonitz, R. G., & Hsia, T. C. (2002) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.1993.292265 · Cited by 157
A spatial impedance controller for robotic manipulation
Fasse, E. D., & Broenink, J. F. (1997) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.611315 · Cited by 88
Caccavale, F., Chiaverini, S., & Siciliano, B. (1997) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/3516.622971 · Cited by 86
Self-citationTang, C. P., Bhatt, R., Abou-Samah, M., & Krovi, V. (2006) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2006.871092 · Cited by 42
Cited by
Dual arm manipulation—A survey
Smith, C., Karayiannidis, Y., Nalpantidis, L., Gratal, X., Qi, P., Dimarogonas, D. V., & Kragic, D. (2012) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2012.07.005 · Cited by 560
Metadata
- Authors
- Caccavale, F., Chiacchio, P., Marino, A., & Villani, L.
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2008-10
- Volume
- 13
- Issue
- 5
- Pages
- 576-586
- ISSN
- 1083-4435 (ISSN-L)
- 1941-014X
- OpenAlex
- W2106296284
- Cited by
- 283
- References
- 12
- FWCI
- 6.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.