Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 182

The DOI matches its Crossref record.

Fabrication and Application of Miniaturized Dielectric Elastomer Stack Actuators

Lotz, Peter, Matysek, Marc, Schlaak, Helmut F. · 2011 · IEEE/ASME Transactions on Mechatronics

Abstract

In dielectric elastomer stack actuators (DEAs), the driving voltage is reduced using thin dielectric layers. They are efficiently fabricated in an automated process. To produce thin dielectric films, uncured polydimethylsiloxane (PDMS) is spun to a thickness below 100 μm. After curing graphite, electrodes are sprayed on the PDMS surface and the next dielectric film can be applied on top. The main process steps are explained in detail. We show that the thickness variation within one layer is smaller than 4%. The electrodes are sprayed to have a sheet resistance of 10 kΩ/sq. The technology presented here is able to produce DEAs with layer thicknesses down to 5 μm. Hence, it is possible to design and fabricate actuators, which are driven only at 150 V. Arrays of small actuators with a resolution of 1 mm can be produced as well as single actuator elements with a diameter up to 40 mm. Finally, the potential of this technology is demonstrated by two examples varying highly in their application. The first application is a vibrotactile display. It generates a perceptive vibration of 125 Hz at a driving voltage of 600 V. The second application is a peristaltic pump with a maximum flow rate of 12 μL/min.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/tmech.2010.2090164

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 182

Metadata

Authors
Lotz, P., Matysek, M., & Schlaak, H. F.
Venue
IEEE/ASME Transactions on Mechatronics
Published
2011-02
Volume
16
Issue
1
Pages
58-66
ISSN
  • 1083-4435 (ISSN-L)
  • 1941-014X
OpenAlex
W2155401647
Cited by
182
References
0
FWCI
6.75
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fabrication and Application of Miniaturized Dielectric Elastomer Stack Actuators. https://app.cochat.ai/papers/10.1109/tmech.2010.2090164
The paper
Lotz, P., Matysek, M., & Schlaak, H. F. (2011). Fabrication and Application of Miniaturized Dielectric Elastomer Stack Actuators. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2010.2090164

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.