Cited by 59Innovative Energy Harvesting TechnologiesAdvanced Sensor and Energy Harvesting MaterialsOrthopaedic implants and arthroplasty

The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.

The Use of Piezoceramics As Electrical Energy Harvesters Within Instrumented Knee Implant During Walking

Open access
Almouahed, Shaban, Gouriou, Manuel, Hamitouche, Chafiaa, Stindel, Eric, Roux, Christian·2011·IEEE/ASME Transactions on Mechatronics

Abstract

The goal of our paper is to quantify the electrical energy that can be harvested within a new generation of instrumented knee implant during normal walking. This generation of knee implant is proposed to assess the in vivo anteroposterior and mediolateral distributions of tibiofemoral force on the tibial baseplate without the need to be powered from an external source of energy. The proposed self-powered diagnostic knee implant can provide the clinicians with useful information on the sagittal and coronal instabilities of the prosthetic knee throughout its lifespan. Four piezoelectric elements were embedded within the anteromedial, posteromedial, anterolateral, and posterolateral compartments of the tibial baseplate. These elements can simultaneously be used to sense the force distribution and generate the electric power needed to supply the acquisition, processing, and transmission system located in the stem of the implant. In order to study the power generation issue, OrCAD/PSpice and MATLAB/Simulink models of the piezoelectric element have been developed to quantify the electrical energy harvested under operating conditions close to those encountered in vivo during normal walking. Furthermore, an experimental prototype of the self-powered diagnostic knee implant has been designed, developed, and tested in our laboratory (LaTIM, INSERM U650, Brest, France) in order to validate the modeling results.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/tmech.2011.2159512

Cites

20 of 20 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 20 references

Research works printed but not linked: 3

  1. 2004, Implants for SurgeryWear of Total Knee-joint ProsthesesPart 3 Loading and Displacement Parameters for Wear-testing Machines With Displacement Control and Corresponding Environmental Conditions for Test
  2. morrison, 1968, Bio-engineering analysis of force actions transmitted by the knee joint, Biomed Eng, 3, 164
  3. 2002, Implants for SurgeryWear of Total Knee-joint ProsthesesPart 1 Loading and Displacement Parameters for Wear-testing Machines With Load Control and Corresponding Environmental Conditions for Test

Cited by

Sorted by citations

See all 59

Metadata

Authors
Almouahed, S., Gouriou, M., Hamitouche, C., Stindel, E., & Roux, C.
Affiliations
Laboratoire de Traitement de l'Information Médicale (FR)
Venue
IEEE/ASME Transactions on Mechatronics
Published
2011-10
Volume
16
Issue
5
Pages
799-807
ISSN
  • 1083-4435 (ISSN-L)
  • 1941-014X
OpenAlex
W2145409536
Cited by
59
References
20
Citations by year
2026: 2 · 2025: 2 · 2023: 2 · 2022: 2 · 2021: 6 · 2020: 1 · 2019: 5 · 2018: 5 · 2017: 6 · 2016: 4 · 2015: 8 · 2014: 7 · 2013: 7 · 2012: 2
FWCI
9.07
Type
journal article
Language
en
Open access
Locations
  • IEEE/ASME Transactions on Mechatronics (publishedVersion)
  • HAL (submittedVersion, other-oa)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Health Sciences › Medicine › Surgery › Orthopaedic implants and arthroplasty
Keywords
piezoelectric energy harvesting, tibial baseplate, walking, piezoelectric modeling

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The Use of Piezoceramics As Electrical Energy Harvesters Within Instrumented Knee Implant During Walking. https://app.cochat.ai/papers/10.1109/tmech.2011.2159512
The paper
Almouahed, S., Gouriou, M., Hamitouche, C., Stindel, E., & Roux, C. (2011). The Use of Piezoceramics As Electrical Energy Harvesters Within Instrumented Knee Implant During Walking. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2011.2159512