A review of walking energy harvesting using piezoelectric materials
Open accessThe DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index; 5 of the 26 sources its claims cite were checked for support.
Abstract
Harvesting kinetic energies is a sustainable method for generating electricity without depleting natural resources. The main mechanisms for kinetic energy harvesting are piezoelectric, electromagnetic, electrostatic or by using magnetostrictive materials. This study focuses on harvesting of walking energy and aims to compare different technologies used for converting of walking energy to electricity, and identify the most effective technology. Several types of harvester located on body of user to harvest kinetic energy of body during walking, while some pavement slabs are produced for harvesting energy. The paper concludes that the pavement equipped with the harvesters would be more reliable than the body located technologies since it is independent of the physiological parameters. Moreover, the piezoelectric transduction is more desirable due to its advantages such as simplicity and flexibility, while produce less current output than the electromagnetic transduction.
Overview
CoChat Summary
TL;DR
This review compares technologies for harvesting walking energy, focusing on body-located versus pavement/floor harvesters and on piezoelectric, electromagnetic, electrostatic/EAP, and related transduction mechanisms. It concludes that pavement-equipped harvesters are more reliable because they are independent of physiological parameters, and that piezoelectric transduction is desirable for its simplicity and flexibility although it produces less current output than electromagnetic transduction.
Key findings
- Body-located harvesters depend on physiological parameters such as acceleration, frequency of motion, and power variation over time; implementing the harvester within a pavement slab is therefore recommended for consistent output.
- Piezoelectric transduction is favored for pavement applications because of its simple structure, design and geometry flexibility, small sensor size, and ability to mesh into hybrid materials, while electromagnetic mechanisms produce higher output current.
- Table 1 reports widely varying outputs: inertial shoe-sole compression 0.8 W; inertial harvesters 100–200 μW; pocket/waist placements 202 μW/180 μW; piezoelectric footfall 150–675 mW; low-frequency piezoelectric nearly 100 mW; cymbal-shaped piezoelectric 53 mW; two back-to-back unimorphs 8.4 mW; heel-strike unimorph 1.8 mW; PVDF stack 1.3 mW; PVDF sheets 1.1 mW; piezoelectric vibration generator 375 μW; EAP heel-strike 0.8 W and 2 W; knees/ankles 34 W and 20 W; electromagnetic backpack 7 W; knee-brace harvester (4.8±0.8) W; hand-held electromagnetic harvester 32 mW; ankle electromagnetic generator 3.9 μW.
- Pavegen tiles are reported to harvest 6–8 joules per footstep, with each step producing enough electricity to keep an LED street lamp lit for 30 seconds; 5% of power lights the central lamp and 95% can be stored or used directly, and 250,000 footsteps were enough to charge 10,000 mobile phones. Vanz and Karakiewicz’s piezoelectric stair prototype generated 300 μJ per actuation per tread and two steps with 10 sensors and 20 LEDs; increasing to 15 sensors per tread and 20 LEDs over three treads increased lighting duration to over 3.5 hours, and 10 sensors along one tread could keep 200 LEDs lit for 10 hours at night in high-traffic pathways.
Methods
- Narrative review comparing different technologies for converting walking energy to electricity and identifying the most effective technology.
- Examines body-located harvesters and floor/pavement harvesters, discussing piezoelectric, electromagnetic, electrostatic/EAP, and magnetostrictive mechanisms, with a comparison table of output power from cited studies.
- No primary experimental data collection is reported; the paper synthesizes prior literature and examples such as Pavegen, Tokyo subway piezoelectric mats, and the Vanz and Karakiewicz stairway prototype.
Limitations
- The paper states that more exploration of piezoelectric properties is needed to optimize power output for pavement applications, and it notes that Pavegen has not shared its precise energy-conversion mechanism and that its main issue is price.
- Evident from the text: as a narrative review, it does not report a systematic search strategy, inclusion/exclusion criteria, or quantitative meta-analysis, so comparisons rely on heterogeneous cited studies and examples.
- Evident from the text: Table 1 mixes units and contexts (W, mW, μW; different body locations and devices), which limits direct comparison of reported outputs.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
4 Valid · 1 Not valid · 17 Not checked · 6 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“according to Riemer and Shapiro [19] the most power output refers to the technology of EAPs for heelstrike devices.”
What the sources say
- Supportedcites [19] source
The Conclusions identify EAPs as the most promising technology for heel-strike devices and report an output of 0.8 W. The Discussion > Heel strike reports lower average outputs for the other heel-strike devices described. This supports the claim as a comparison of heel-strike technologies, not of all biomechanical energy harvesters. (LLM, conf=0.88)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
In the paper
“Moreover, the average power for going downstairs is significantly higher than for going upstairs.”
What the sources say
- Not checked — no full text of the sourcecites [7] Gorlatova M., 2014, The 2014 ACM international conference on Measurement and modeling of computer systems source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Generally, motion energy availability increases as fm increases [17].”
What the sources say
- Not checked — no full text of the sourcecites [17] source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“the frequency of the human movements is less than 10 Hz [5].”
What the sources say
- Not checked — no full text of the sourcecites [5] source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“the maximum power is generated when the resonant frequency of the generators matches ambient vibration frequency [4].”
What the sources say
- Not checked — no full text of the sourcecites [4] Zhu D., 2010, Kinetic Energy Harvesting, in Energy harvesting systems source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
10 more claims
Create a free account to see all 28 claims and every source verdict.
- Probably not a substantial claim. 5
- It may state two separate claims as one. 11
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Walking is a major action that dissipates a larger proportion of the locomotive energy (Nia et al., 2017)”
From PIEZOELECTRIC ENERGY HARVESTING USING FOOTSTEPS (2023) · cites this paper as Nia et al., 2017
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“the mechanical stress exerted on the ground when walking can be used as a source for generation.”
From PIEZOELECTRIC ENERGY HARVESTING USING FOOTSTEPS (2023) · cites this paper as Nia et al., 2017
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008 · cited 2×
“Harvesting kinetic energy of body during walking Study of energy harvesting has recently gained attention in order to power portable electronic devices [12, 13].”
BackgroundA study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819 · cited 1×
“walking, the frequency of the human movements is less than 10 Hz [5].”
BackgroundIPCC Special Report on Renewable Energy Sources and Climate Change Mitigation
Revel, D. (2011) · OpenEdition (OpenEdition) · doi:10.58079/o8wx · Cited by 2,175
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888 · cited 1×
“Generally, motion energy availability increases as fm increases [17].”
BackgroundA piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818 · cited 1×
“1mW [38] A piezoelectric vibration generator 375 μW”
BackgroundAnalysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
Energy scavenging with shoe-mounted piezoelectrics
Shenck, N. S., & Paradiso, J. A. (2001) · IEEE Micro · doi:10.1109/40.928763 · Cited by 1,091 · cited 1×
“[35, 36] A cymbal-shaped piezoelectric 53mW [37] Two back-to-back unimorphs 8.”
MethodHuman-powered wearable computing
Starner, T. (1996) · IBM Systems Journal · doi:10.1147/sj.353.0618 · Cited by 876 · cited 1×
“Human activities as energy sources [14] are considered for harvesting by employing electromagnetic, piezoelectric, or electrostatic transduction methods [12, 15, 16].”
BackgroundParasitic power harvesting in shoes
Kymissis, J., Kendall, C., Paradiso, J., & Gershenfeld, N. (2002) · Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215) · doi:10.1109/iswc.1998.729539 · Cited by 621 · cited 3×
“3mW [22] A stack of Polyvinylidinefluoride (PVDF) sheets shaped 1.”
BackgroundMethodGenerating Electricity While Walking with Loads
Rome, L. C., Flynn, L., Goldman, E. M., & Yoo, T. D. (2005) · Science · doi:10.1126/science.1111063 · Cited by 605
Research works printed but not linked: 15
- Vanz E., 2015, The Next City-New Technologies and the Future of the Built Environment, 154
- Pfeifer K.B., 2001, SAND2001–3619 Unlimited Release Printed November, 3, 3q6
- Donelan J.M., 2009, Radio and Wireless Symposium
- Romero E., 2009, Annual International Conference of the IEEE
- Exercise S.A. ed McArdle WD, 2001, Disease Prevention: in Exercise Physiology: Energy, Nutrition and Human Performance
- Romero E., 2008, Electronic Proc. COMS
- Duffy M., 2004, PESC 04. 2004 IEEE 35th Annual
- Kymissis J., 1998, Digest of Papers. Second International Symposium
- Kornbluh R.D., 2002, International Society for Optics and Photonics
- Lin G., 2012, Google Patents
- Niu P., 2004, IEEE 35th Annual
- Kulah H., 2004, 17th IEEE International Conference on.(MEMS)
- Kumar D., 2013, Sixth National Power Electronics Conference (NPEC)
- Webster G., 2011, Green sidewalk makes electricity–one footstep at a time
- Fujimoto A., 2014, Energy Harvesting Flooring
Cited by
A comprehensive review on the state-of-the-art of piezoelectric energy harvesting
Sezer, N., & Koç, M. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105567 · Cited by 1,480
A Review on Mechanisms for Piezoelectric-Based Energy Harvesters
Elahi, H., Eugeni, M., & Gaudenzi, P. (2018) · Energies · doi:10.3390/en11071850 · Cited by 247
Sarker, M. R., Julai, S., Sabri, M. F. M., Said, S. M., Islam, M. M., & Tahir, M. (2019) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2019.111634 · Cited by 197
Ahmad, S., Abdul Mujeebu, M., & Farooqi, M. A. (2019) · International Journal of Energy Research · doi:10.1002/er.4350 · Cited by 142
“A detailed review on walking energy harvesting by piezoelectric materials was provided by Nia et al.228 They concluded that, for this application, even though electromagnetic technology could produce higher output, the piezoelectric technology is more feasible due to its advantages such as simplicity and flexibility.”
BackgroundControlling the kinematics of a spring-pendulum system using an energy harvesting device
He, C., Amer, T. S., Tian, D., Abolila, A. F., & Galal, A. A. (2022) · Journal of low frequency noise, vibration and active control · doi:10.1177/14613484221077474 · Cited by 135
Metadata
- Authors
- Nia, E. M., Zawawi, N. A. W. A., & Singh, B. S. M.
- Affiliations
- Universiti Teknologi Petronas (MY)
- Corresponding author
- Zawawi, Noor Amila Wan Abdullah
- Venue
- IOP Conference Series: Materials Science and Engineering
- Publisher
- IOP Publishing
- Published
- 2017-12
- Volume
- 291
- Pages
- 012026
- ISSN
- 1757-8981 (ISSN-L)
- 1757-899X
- OpenAlex
- W2782534781
- Cited by
- 97
- References
- 39
- Citations by year
- 2026: 2 · 2025: 10 · 2024: 17 · 2023: 12 · 2022: 13 · 2021: 14 · 2020: 12 · 2019: 12 · 2018: 5
- FWCI
- 17.09
- Type
- conference paper
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- cc-by
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- creativecommons.org/licenses/by/3.0/ (vor)
- Locations
- IOP Conference Series Materials Science and Engineering (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Energy Harvesting in Wireless Networks
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Keywords
- piezoelectric materials, kinetic energy harvesting, piezoelectric transduction, electromagnetic transduction, magnetostrictive materials, wearable energy harvester, self-powered devices
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of walking energy harvesting using piezoelectric materials. https://app.cochat.ai/papers/10.1088/1757-899x/291/1/012026
- The paper
- Nia, E. M., Zawawi, N. A. W. A., & Singh, B. S. M. (2017). A review of walking energy harvesting using piezoelectric materials. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/291/1/012026
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.