The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
A Survey on Control of Hydraulic Robotic Manipulators With Projection to Future Trends
Abstract
This paper presents the recent advancements in the control of multiple-degree-of-freedom hydraulic robotic manipulators. A literature review is performed on their control, covering both free-space and constrained motions of serial and parallel manipulators. Stability-guaranteed control system design is the primary requirement for all control systems. Thus, this paper pays special attention to such systems. An objective evaluation of the effectiveness of different methods and the state of the art in a given field is one of the cornerstones of scientific research and progress. For this purpose, the maximum position tracking error |e|maxand a performance indicator ρ (the ratio of |e|maxwith respect to the maximum velocity) are used to evaluate and benchmark different free-space control methods in the literature. These indicators showed that stability-guaranteed nonlinear model based control designs have resulted in the most advanced control performance. In addition to stable closed-loop control, lack of energy efficiency is another significant challenge in hydraulic robotic systems. This paper pays special attention to these challenges in hydraulic robotic systems and discusses their reciprocal contradiction. Potential solutions to improve the system energy efficiency without control performance deterioration are discussed. Finally, for hydraulic robotic systems, open problems are defined and future trends are projected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nonlinear and adaptive control design
Krstić, M., Kokotović, P. V., & Kanellakopoulos, I. (1995) · Cited by 10,421
Impedance Control: An Approach to Manipulation: Part I—Theory
Hogan, N. (1985) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3140702 · Cited by 3,673
Corke, P., Roberts, J., Cunningham, J., & Hainsworth, D. (2008) · Springer Handbook of Robotics · doi:10.1007/978-3-540-30301-5_50 · Cited by 3,543
Hybrid Position/Force Control of Manipulators
Raibert, M. H., & Craig, J. J. (1981) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3139652 · Cited by 3,015
BigDog, the Rough-Terrain Quadruped Robot
Raibert, M., Blankespoor, K., Nelson, G., & Playter, R. (2008) · IFAC Proceedings Volumes · doi:10.3182/20080706-5-kr-1001.01833 · Cited by 1,495
Optimization-based locomotion planning, estimation, and control design for the atlas humanoid robot
Kuindersma, S., Deits, R., Fallon, M., Valenzuela, A., Dai, H., Permenter, F., Koolen, T., Marion, P., & Tedrake, R. (2016) · Autonomous Robots · doi:10.1007/s10514-015-9479-3 · Cited by 835
The Stewart platform manipulator: a review
Dasgupta, B., & Mruthyunjaya, T. S. (2000) · Mechanism and Machine Theory · doi:10.1016/s0094-114x(99)00006-3 · Cited by 715
Design of HyQ – a hydraulically and electrically actuated quadruped robot
Semini, C., Tsagarakis, N. G., Guglielmino, E., Focchi, M., Cannella, F., & Caldwell, D. G. (2011) · Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering · doi:10.1177/0959651811402275 · Cited by 630
Self-citationAircraft Systems: Mechanical, Electrical, and Avionics Subsystems Integration
Moir, I., & Seabridge, A. G. (1992) · Cited by 381
A comparative analysis of actuator technologies for robotics
Hollerbach, J. M., Hunter, I. W., & Ballantyne, J. (1992) · Cited by 330
Cited by
Yang, G., & Yao, J. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.03.029 · Cited by 51
Accurate Finite-Time Motion Control of Hydraulic Actuators with Event-Triggered Input
Chen, J., Du, X., Lyu, L., Fei, Z., & Sun, X.-M. (2024) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2023.3319348 · Cited by 18
Predefined-Time Tracking Control of Servo Hydraulic Cylinder Based on Reinforcement Learning
Han, T., Nie, X., Que, N., Lu, J., Yao, J., & Yu, X. (2025) · Actuators · doi:10.3390/act15010009 · Cited by 1
Metadata
- Authors
- Mattila, J., Koivumaki, J., Caldwell, D. G., & Semini, C.
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2017-04
- Volume
- 22
- Issue
- 2
- Pages
- 669-680
- ISSN
- 1083-4435 (ISSN-L)
- 1941-014X
- OpenAlex
- W2588172569
- Cited by
- 277
- References
- 47
- FWCI
- 15.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Survey on Control of Hydraulic Robotic Manipulators With Projection to Future Trends. https://app.cochat.ai/papers/10.1109/tmech.2017.2668604
- The paper
- Mattila, J., Koivumaki, J., Caldwell, D. G., & Semini, C. (2017). A Survey on Control of Hydraulic Robotic Manipulators With Projection to Future Trends. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2017.2668604
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.