The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Trajectory Tracking of an Electro-Hydraulic Servo System With an New Friction Model-Based Compensation
Abstract
Nonlinear friction is the main factor affecting the dynamic and static performances of robotic excavator electrohydraulic servo systems. The traditional LuGre friction model is only related to the velocity. However, the friction characteristics of the electrohydraulic servo system are also related to the position and direction. An improved LuGre is proposed to describe the friction characteristics between position, velocity and direction, and the instability problem is also solved by stopping the observation of the internal statez. Then, inertia weight, asynchronous change method and elite mutation operation are added into the basic particle swarm optimization algorithm to identify the friction model parameters accurately. Moreover, a friction compensator (FC) based on the LuGre model is designed. Three controllers are implemented with different trajectory experiments on a 23 ton excavator. Experimental results demonstrated that the FC based on the improved LuGre can improve the comprehensive performance of the electrohydraulic servo system.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Kennedy, J., & Eberhart, R. (2002) · Proceedings of ICNN'95 - International Conference on Neural Networks · doi:10.1109/icnn.1995.488968 · Cited by 58,192
A new model for control of systems with friction
Canudas de Wit, C., Olsson, H., Astrom, K. J., & Lischinsky, P. (1995) · IEEE Transactions on Automatic Control · doi:10.1109/9.376053 · Cited by 3,685
High speed CNC system design. Part II: modeling and identification of feed drives
Erkorkmaz, K., & Altintas, Y. (2001) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(01)00003-7 · Cited by 248
Ren, C., Li, X., Yang, X., & Ma, S. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2892678 · Cited by 238
Development of a Novel Parasitic-Type Piezoelectric Actuator
Li, J., Zhou, X., Zhao, H., Shao, M., Li, N., Zhang, S., & Du, Y. (2017) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2016.2604242 · Cited by 180
Robotic excavator trajectory control using an improved GA based PID controller
Feng, H., Yin, C.-B., Weng, W.-W., Ma, W., Zhou, J.-J., Jia, W.-H., & Zhang, Z.-L. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.12.014 · Cited by 164
Self-citationAn investigation of a novel LuGre-based friction force model
Marques, F., Woliński, Ł., Wojtyra, M., et al. (2021) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2021.104493 · Cited by 128
Control of systems with friction
Álvarez‐Ramírez, J., Garrido, R. A., & Femat, R. (1995) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.51.6235 · Cited by 122
Won, D., Kim, W., & Tomizuka, M. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.2985619 · Cited by 107
Vibration energy flow transmission in systems with Coulomb friction
Dai, W., Yang, J. M., & Wiercigroch, M. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106932 · Cited by 84
Cited by
Multi-objective time-energy-impact optimization for robotic excavator trajectory planning
Feng, H., Jiang, J., Ding, N., et al. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.105094 · Cited by 51
Self-citationDing, H., Sang, Z., Li, Z., et al. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.105209 · Cited by 45
Advanced Motion Control of Hydraulic Manipulator With Precise Compensation of Dynamic Friction
Xia, Y., Qi, M., Lyu, L., Jin, Z., Zhang, L., Chen, Z., & Yao, B. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2024.3384600 · Cited by 38
“8(b) come from the observer method introduced in [25] and [26].”
MethodChen, G., Wu, W., Yang, C., et al. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3541284 · Cited by 27
“However, conventional PID control methods face significant challenges in achieving motion control of DHM in the presence of uncertain model parameters, as there are high levels of nonlinearity [3], strong coupling [4], [5], and time-varying parameters [6] inherent in hydraulic systems.”
Qin, Y., Zhao, D., Zhang, W., & Deng, Y. (2025) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2024.3438188 · Cited by 23
“The electrohydraulic actuator (EHA) is adopted as the active suspension actuator for emergency rescue vehicles owing to its higher power-to-weight ratio [8] and strong load-bearing capacity [9], [10].”
Metadata
- Authors
- Feng, H., Yin, C., & Cao, D.
- Affiliations
- Nanjing Tech University (CN)
- Sany (China) (CN)
- ORCID
- Venue
- IEEE/ASME Transactions on Mechatronics
- Published
- 2023-02
- Volume
- 28
- Issue
- 1
- Pages
- 473-482
- ISSN
- 1083-4435 (ISSN-L)
- 1941-014X
- OpenAlex
- W4294310841
- Cited by
- 66
- References
- 34
- Citations by year
- 2026: 16 · 2025: 22 · 2024: 19 · 2023: 9
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE/ASME Transactions on Mechatronics (publishedVersion)
- Funders
- National Natural Science Foundation of China (52105064)
- Natural Science Foundation of Jiangsu Province (BK20221342)
- National Key Research and Development Program of China (2021YFB2011904)
- Research Start-up Fund of NUIST (2021R042)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Hydraulic and Pneumatic Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Dynamics and Control of Mechanical Systems
- Physical Sciences › Engineering › Mechanical Engineering › Control Systems in Engineering
- Keywords
- electro-hydraulic servo system, trajectory tracking, LuGre friction model, friction compensation, nonlinear friction, robotic excavator, particle swarm optimization, friction parameter identification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Trajectory Tracking of an Electro-Hydraulic Servo System With an New Friction Model-Based Compensation. https://app.cochat.ai/papers/10.1109/tmech.2022.3201283
- The paper
- Feng, H., Yin, C., & Cao, D. (2023). Trajectory Tracking of an Electro-Hydraulic Servo System With an New Friction Model-Based Compensation. IEEE/ASME Transactions on Mechatronics. https://doi.org/10.1109/tmech.2022.3201283
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.