The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Microwave Measurement of Dielectric Properties of Low-Loss Materials by the Dielectric Rod Resonator Method
Abstract
Improvements both in accuracy and speed are described for the technique of measuring the microwave dielectric properties of low-loss materials by using a dielectric rod resonator short-circuited at both ends by two parallel conducting plates. A technique for measuring the effective surface resistance R/sub s/ of the conducting plates is proposed to allow the accurate measurement of the loss tangent tan delta. By means of the first-order approximation, the expressions are analytically derived for estimating the errors of the measured values of relative permittivity epsilon/sub r/, tan delta, and R/sub r/, for measuring the temperature coefficient of epsilon/sub r/, and for determining the required size of the conducting plates. Computer-aided measurements are realized by using these expressions. It is shown that the temperature dependence of R/sub s/, should be considered in the tan delta measurement. The copper plates used in this experiment have the relative conductivity of 91.0+-2.7 percent at 20°C, estimated from the measured R/sub s/ value. For a 99.9-percent alumina ceramic rod sample, the results measured at 7.69 GHz and 25°C show that epsilon/sub r/,= 9.687+-0.003 and tan delta = (1.6+-0.2)x 10/sup -5/. The temperature coefficients measured between 25 and 100°C are 112x10/sup -6//°C for epsilon/sub r/, and 23x10/sup -4//°C for tan delta.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ginzton, E. L., & Beers, Y. (1958) · Journal of The Electrochemical Society · doi:10.1149/1.2428788 · Cited by 440
Cited by
Effect of Porosity and Grain Size on the Microwave Dielectric Properties of Sintered Alumina
Penn, S. J., Alford, N. M., Templeton, A., Wang, X., Xu, M., Reece, M., & Schrapel, K. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb03066.x · Cited by 1,053
Low-loss dielectric ceramic materials and their properties
Sebastian, M. T., Ubic, R., & Jantunen, H. (2015) · International Materials Reviews · doi:10.1179/1743280415y.0000000007 · Cited by 825
The effect of grain and particle size on the microwave properties of barium titanate (BaTiO3)
McNeal, M. P., Jang, S.-J., & Newnham, R. E. (1998) · Journal of Applied Physics · doi:10.1063/1.367097 · Cited by 286
Jacob, M. V., Hartnett, J. G., Mazierska, J., Giordano, V., Krupka, J., & Tobar, M. E. (2004) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2003.821911 · Cited by 27
“The choice of a measurement method depends on values of and of a dielectric under test.”
Background
Metadata
- Authors
- Kobayashi, Y., & Katoh, M.
- Venue
- IEEE Transactions on Microwave Theory and Techniques
- Published
- 1985-07
- Volume
- 33
- Issue
- 7
- Pages
- 586-592
- ISSN
- 0018-9480 (ISSN-L)
- OpenAlex
- W2083777328
- Cited by
- 657
- References
- 1
- FWCI
- 1.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.