The DOI matches its Crossref record.
Parasitic Ringing and Design Issues of Digitally Controlled High Power Interleaved Boost Converters
Abstract
High power boost converter has become the essential part of the distributed power system that enables energy to be fully utilized in fuel cell powered electric vehicles and stationary power systems. This paper presents analysis and design of a high-power multileg interleaved boost converter with a digital signal processor (DSP) based controller. A 20-kW converter was designed with coupled inductors to allow core-loss reduction and designed with high frequency switching to minimize the component size and eliminate the switching losses under discontinuous conducting mode operation. A dual-loop average current mode current control method implemented in DSP is employed to achieve the fast transient response. It was found through circuit analysis, simulation and experiment that the boost inductor interacted with the device parasitic capacitor and created unnecessary oscillating current whenever it reached zero current. Two high-power devices were used in both simulation and experiment to verify the analysis and design for a wide load range. Simulation and experiment results of the 20-kW boost converter under startup condition and load transient condition are also presented. Different anti-windup schemes for a typical PI-controller are evaluated. The results show that this typical controller with proper anti-windup scheme achieves better transient performance than without anti-windup scheme.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Family of multiport bidirectional DC–DC converters
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050362 · Cited by 488
High-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411
Self-citationNejabatkhah, F., Danyali, S., Hosseini, S. H., Sabahi, M., & Niapour, S. M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2172465 · Cited by 406
Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles
Lai, J.-S., & Nelson, D. J. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.890122 · Cited by 318
Self-citation
Metadata
- Authors
- Huang, X., Wang, X., Nergaard, T., Lai, J.-S., Xu, X., & Zhu, L.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2004-09
- Volume
- 19
- Issue
- 5
- Pages
- 1341-1352
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2145382472
- Cited by
- 165
- References
- 0
- FWCI
- 5.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Parasitic Ringing and Design Issues of Digitally Controlled High Power Interleaved Boost Converters. https://app.cochat.ai/papers/10.1109/tpel.2004.833434
- The paper
- Huang, X., Wang, X., Nergaard, T., Lai, J.-S., Xu, X., & Zhu, L. (2004). Parasitic Ringing and Design Issues of Digitally Controlled High Power Interleaved Boost Converters. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2004.833434
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.