The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Active Input–Voltage and Load–Current Sharing in Input-Series and Output-Parallel Connected Modular DC–DC Converters Using Dynamic Input-Voltage Reference Scheme
Abstract
This paper explores a new configuration for modular DC/DC converters, namely, series connection at the input, and parallel connection at the output, such that the converters share the input voltage and load current equally. This is an important step toward realizing a truly modular power system architecture, where low-power, low-voltage, building block modules can be connected in any series/parallel combination at input or at output, to realize any given system specifications. A three-loop control scheme, consisting of a common output voltage loop, individual inner current loops, and individual input voltage loops, is proposed to achieve input voltage and load current sharing. The output voltage loop provides the basic reference for inner current loops, which is modified by the respective input voltage loops. The average of converter input voltages, which is dynamically varying, is chosen as the reference for input voltage loops. This choice of reference eliminates interaction among different control loops. The input-series and output-parallel (ISOP) configuration is analyzed using the incremental negative resistance model of DC/DC converters. Based on the analysis, design methods for input voltage controller are developed. Analysis and proposed design methods are verified through simulation, and experimentally, on an ISOP system consisting of two forward converters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Rashid, R. (1988) · Cited by 2,641
Input filter considerations in design and application of switching regulators.
Middlebrook, R. D. (1976) · Medical Entomology and Zoology · Cited by 1,180
Simplified analysis of PWM converters using model of PWM switch. Continuous conduction mode
Vorperian, V. (1990) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.106126 · Cited by 716
Analysis and control design of paralleled DC/DC converters with current sharing
Thottuvelil, V. J., & Verghese, G. C. (1998) · IEEE Transactions on Power Electronics · doi:10.1109/63.704129 · Cited by 190
Current distribution control for parallel connected converters. II
Siri, K., Lee, C. Q., & Wu, T.-F. (1992) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.256304 · Cited by 181
Current distribution control for parallel connected converters. I
Siri, K., Lee, C. Q., & Wu, T.-E. (1992) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.256303 · Cited by 181
Gerster, C. (2002) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.1994.316362 · Cited by 114
Switching-ripple-based current sharing for paralleled power converters
Perreault, D. J., Sato, K., Selders, R. L., et al. (1999) · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · doi:10.1109/81.795839 · Cited by 72
Cited by
DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issues
Dragicevic, T., Lu, X., Vasquez, J. C., & Guerrero, J. M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2464277 · Cited by 1,451
Chen, W., Ruan, X., Yan, H., & Tse, C. K. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2012406 · Cited by 397
Wang, P., Lu, X., Yang, X., Wang, W., & Xu, D. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2499310 · Cited by 364
A Review of Power Electronics for Grid Connection of Utility-Scale Battery Energy Storage Systems
Wang, G., Konstantinou, G., Townsend, C. D., Pou, J., Vazquez, S., Demetriades, G. D., & Agelidis, V. G. (2016) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2016.2586941 · Cited by 362
She, X., Huang, A. Q., & Ni, X. (2013) · 2013 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2013.6646725 · Cited by 14
Metadata
- Authors
- Ayyanar, R., Giri, R., & Mohan, N.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2004-11
- Volume
- 19
- Issue
- 6
- Pages
- 1462-1473
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2172229981
- Cited by
- 328
- References
- 9
- FWCI
- 2.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Active Input–Voltage and Load–Current Sharing in Input-Series and Output-Parallel Connected Modular DC–DC Converters Using Dynamic Input-Voltage Reference Scheme. https://app.cochat.ai/papers/10.1109/tpel.2004.836671
- The paper
- Ayyanar, R., Giri, R., & Mohan, N. (2004). Active Input–Voltage and Load–Current Sharing in Input-Series and Output-Parallel Connected Modular DC–DC Converters Using Dynamic Input-Voltage Reference Scheme. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2004.836671
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.