A Cascade Multilevel Converter Topology With Reduced Number of Switches
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
This paper introduces a new multilevel converter topology that has many steps with fewer power electronic switches. The proposed circuit consists of series-connected submultilevel converters blocks. The optimal structures of this topology are investigated for various objectives, such as minimum number of switches and capacitors, and minimum standing voltage on switches for producing maximum output voltage steps. A new algorithm for determination of dc voltage sourcespsila magnitudes has also been presented. The proposed topology results in reduction of the number of switches, losses, installation area, and converter cost. The operation and performance of the proposed multilevel converter has been verified by the simulation and experimental results of a single-phase 53-level multilevel converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilevel inverters: a survey of topologies, controls, and applications
Rodriguez, J., Lai, J.-S., & Peng, F. Z. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.801052 · Cited by 6,715
A New Neutral-Point-Clamped PWM Inverter
Nabae, A., Takahashi, I., & Akagi, H. (1981) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1981.4503992 · Cited by 5,139
Multi-level conversion: high voltage choppers and voltage-source inverters
Meynard, T. A., & Foch, H. (2003) · PESC `92 Record. 23rd Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1992.254717 · Cited by 1,455
Hybrid multilevel power conversion system: a competitive solution for high-power applications
Manjrekar, M. D., Steimer, P. K., & Lipo, T. A. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.845059 · Cited by 739
Active harmonic elimination for multilevel converters
Du, Z., Tolbert, L. M., & Chiasson, J. N. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.869757 · Cited by 321
A Cascade Multilevel Inverter Using a Single DC Power Source
Du, Z., Tolbert, L. M., Chiasson, J. N., & Ozpineci, B. (2006) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2006.1620573 · Cited by 168
Khomfoi, S., & Tolbert, L. M. (2007) · Elsevier eBooks · doi:10.1016/b978-012088479-7/50035-3 · Cited by 153
Tolbert, L. M., & Shi, X. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811407-0.00013-1 · Cited by 136
Using reverse-blocking IGBTs in power converters for adjustable-speed drives
Klumpner, C., & Blaabjerg, F. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.872956 · Cited by 125
A multilevel soft-switching inverter with inductor coupling
Song, B.-M., Kim, J.-H., Lai, J., Seong, K.-C., Kim, H.-J., & Park, S.-S. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.913730 · Cited by 53
A multilevel soft-switching inverter with inductor coupling
Song, B.-M., Kim, J., Lai, J., et al. (2002) · doi:10.1109/ias.2000.883116 · Cited by 47
A novel structure for multilevel converters
Babaei, E., Haque, M. T., & Hosseini, S. H. (2005) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2005.202753 · Cited by 32
Self-citation
Cited by
Multilevel Inverter Topologies With Reduced Device Count: A Review
Gupta, K. K., Ranjan, A., Bhatnagar, P., Sahu, L. K., & Jain, S. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2405012 · Cited by 1,193
Modular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities
Nami, A., Liang, J., Dijkhuizen, F., & Demetriades, G. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2327641 · Cited by 1,042
A New Multilevel Converter Topology With Reduced Number of Power Electronic Components
Ebrahimi, J., Babaei, E., & Gharehpetian, G. B. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2151813 · Cited by 525
Self-citationNew cascaded multilevel inverter topology with minimum number of switches
Babaei, E., & Hosseini, S. H. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.06.032 · Cited by 508
Self-citationHybrid Multilevel Inverter Using Switched Capacitor Units
Babaei, E., & Gowgani, S. S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2290769 · Cited by 498
“In order to show the advantages of the proposed topologies in comparison with some recently presented topologies that use isolated dc voltage sources, the proposed topologies have been compared with the cascaded multilevel inverter using bidirectional switches (CMIBS) [14], cascaded multilevel inverter using binary un…”
BackgroundMethodSelf-citation
Metadata
- Authors
- Babaei, E.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2008-11
- Volume
- 23
- Issue
- 6
- Pages
- 2657-2664
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2168695989
- Cited by
- 669
- References
- 12
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.