The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Identification of Feasible Topologies for Multiple-Input DC–DC Converters
Abstract
This letter studies single-input dc-dc converter topologies that are suitable to be expanded into their multiple-input converter version. The analysis is based on several assumptions, restrictions, and conditions, including the goal of minimizing the total number of components and the use of at least one forward-conducting bidirectional blocking switch in each input leg. These conditions may affect the outcome of the multiple-input converter synthesis and lead to different configurations from those suggested before in the literature. Although simultaneous power delivery from all sources is not required, it should be possible to independently control the power drained from each input with some degree of freedom. The letter lists four rules that must be observed in order to be able to realize a multiple-input converter from its single-input version. These rules are used to identify the only feasible input cell that complies with all assumptions and conditions. Unfeasible input cells are also shown. The letter also identifies some additional feasible input cells if some of the assumptions and conditions are relaxed. These input cells are used to suggest several multiple-input converter topologies. Among them, six topologies, including versions of the single-ended primary inductance converter and the Cuk converters, are introduced through their circuit schematic.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A multiple-input DC-DC converter topology
Dobbs, B. G., & Chapman, P. L. (2003) · IEEE Power Electronics Letters · doi:10.1109/lpel.2003.813481 · Cited by 511
Family of multiport bidirectional DC–DC converters
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050362 · Cited by 488
Design of Multiple-Input Power Converter for Hybrid Vehicles
Solero, L., Lidozzi, A., & Pomilio, J. A. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854020 · Cited by 478
Three-Port Triple-Half-Bridge Bidirectional Converter With Zero-Voltage Switching
Tao, H., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915023 · Cited by 404
Characteristics of the Multiple-Input DC–DC Converter
Matsuo, H., Lin, W., Kurokawa, F., Shigemizu, T., & Watanabe, N. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825362 · Cited by 385
Power Budgeting of a Multiple-Input Buck-Boost Converter
Benavides, N. D., & Chapman, P. L. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.857531 · Cited by 189
Tri-Modal Half-Bridge Converter Topology for Three-Port Interface
Al-Atrash, H., Tian, F., & Batarseh, I. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889583 · Cited by 161
A three-port bi-directional converter for hybrid fuel cell systems
Michon, M., Duarte, J. L., Hendrix, M., & Simoes, M. G. (2004) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1354836 · Cited by 160
A Multiple-Input DC/DC Converter for Renewable Energy Systems
Chiu, H., Huang, H.-M., Lin, L., & Tseng, M. (2006) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2005.1600837 · Cited by 72
Rodriguez, F. D., & Imes, W. G. (2002) · Intersociety Energy Conversion Engineering Conference · doi:10.1109/iecec.1996.552892 · Cited by 61
Cited by
Kumar, D., Zare, F., & Ghosh, A. (2017) · IEEE Access · doi:10.1109/access.2017.2705914 · Cited by 751
Review of Multiport Converters for Solar and Energy Storage Integration
Bhattacharjee, A. K., Kutkut, N., & Batarseh, I. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2830788 · Cited by 423
Nejabatkhah, F., Danyali, S., Hosseini, S. H., Sabahi, M., & Niapour, S. M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2172465 · Cited by 406
Modeling and Control of Three-Port DC/DC Converter Interface for Satellite Applications
Qian, Z., Abdel-Rahman, O., Al-Atrash, H., & Batarseh, I. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2033926 · Cited by 399
A High Step-Up Three-Port DC–DC Converter for Stand-Alone PV/Battery Power Systems
Chen, Y.-M., Huang, A. Q., & Yu, X. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2242491 · Cited by 305
Metadata
- Authors
- Kwasinski, A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2009-03
- Volume
- 24
- Issue
- 3
- Pages
- 856-861
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2099211093
- Cited by
- 267
- References
- 13
- FWCI
- 14.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Identification of Feasible Topologies for Multiple-Input DC–DC Converters. https://app.cochat.ai/papers/10.1109/tpel.2008.2009538
- The paper
- Kwasinski, A. (2009). Identification of Feasible Topologies for Multiple-Input DC–DC Converters. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2008.2009538
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.