The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Impact of Power Density Maximization on Efficiency of DC–DC Converter Systems
Abstract
The demand for decreasing costs and volume leads to a constantly increasing power density of industrial converter systems. In order to improve the power density, further different aspects, like thermal management and electromagnetic effects, must be considered in conjunction with the electrical design. Therefore, a comprehensive optimization procedure based on analytical models for minimizing volume of DC-DC converter systems has been developed at the power electronic systems laboratory of the Swiss Federal Institute of Technology (ETH Zurich). Based on this procedure, three converter topologies-a phase-shift converter with current doubler and with capacitive output filter and a series-parallel resonant converter-are optimized with respect to power density for a telecom supply (400 V/48 V). There, the characteristic of the power density, the efficiency, and the volume distribution between the components as functions of frequency are discussed. For the operating points with maximal power density, the loss distribution is also presented. Furthermore, the sensitivity of the optimum with respect to junction temperature, cooling, and core material is investigated. The highest power density is achieved by the series-parallel resonant converter. For a 5-kW supply, a density of approximately 12 kW/L and a switching frequency of ca. 130 kHz are obtained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145
Steinmetz, C. P. (1984) · Proceedings of the IEEE · doi:10.1109/proc.1984.12842 · Cited by 656
Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms
Hurley, W. G., Gath, E., & Breslin, J. G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838110 · Cited by 368
Cited by
Biela, J., Schweizer, M., Waffler, S., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072896 · Cited by 892
Self-citationImproved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems
Muhlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2162252 · Cited by 535
Self-citationOggier, G. G., Garcia, G. O., & Oliva, A. R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2072966 · Cited by 498
Core Losses Under the DC Bias Condition Based on Steinmetz Parameters
Muhlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160971 · Cited by 424
Self-citationUltraflat Interleaved Triangular Current Mode (TCM) Single-Phase PFC Rectifier
Marxgut, C., Krismer, F., Bortis, D., & Kolar, J. W. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2258941 · Cited by 345
Self-citation
Metadata
- Authors
- Biela, J., Badstuebner, U., & Kolar, J. W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2009-01
- Volume
- 24
- Issue
- 1
- Pages
- 288-300
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2071995940
- Cited by
- 187
- References
- 3
- FWCI
- 11.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of Power Density Maximization on Efficiency of DC–DC Converter Systems. https://app.cochat.ai/papers/10.1109/tpel.2009.2006355
- The paper
- Biela, J., Badstuebner, U., & Kolar, J. W. (2009). Impact of Power Density Maximization on Efficiency of DC–DC Converter Systems. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2009.2006355
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.