The DOI matches its Crossref record.
Switching Control Technique of Phase-Shift-Controlled Full-Bridge Converter to Improve Efficiency Under Light-Load and Standby Conditions Without Additional Auxiliary Components
Abstract
The main theme of this paper is to propose a switching method to reduce the loss of phase-shift-controlled full-bridge converter under light-load and standby conditions. It will be shown that the efficiency can be improved using the proposed switching control technique. The presented switching control technique controls the full-bridge converter by pulsewidth-modulated (PWM) switching mode under light-load condition and PWM switching with burst mode under standby condition. The transition point between phase-shift switching method and the proposed method is investigated and confirmed by experimental results. A field-programmable-gate-array-based digital-controlled experimental system has been set up. The specifications of the converter include: input voltage = 400 V, output voltage = 12 V, and output power = 400 W. Experimental results show that the efficiency improvement can be up to 26% under light-load condition and the standby power is less than 1 W. These results confirm the effectiveness of the proposed switching control technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
ZVS of Power MOSFETs Revisited
Kasper, M., Burkat, R., Deboy, F., & Kolar, J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2574998 · Cited by 437
Rodriguez, A., Vazquez, A., Lamar, D. G., Hernando, M. M., & Sebastian, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309853 · Cited by 352
An Automotive Onboard 3.3-kW Battery Charger for PHEV Application
Gautam, D. S., Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2210259 · Cited by 274
Metadata
- Authors
- Chen, B.-Y., & Lai, Y.-S.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2010-04
- Volume
- 25
- Issue
- 4
- Pages
- 1001-1012
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2122381462
- Cited by
- 212
- References
- 0
- FWCI
- 12.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Switching Control Technique of Phase-Shift-Controlled Full-Bridge Converter to Improve Efficiency Under Light-Load and Standby Conditions Without Additional Auxiliary Components. https://app.cochat.ai/papers/10.1109/tpel.2009.2033069
- The paper
- Chen, B.-Y., & Lai, Y.-S. (2010). Switching Control Technique of Phase-Shift-Controlled Full-Bridge Converter to Improve Efficiency Under Light-Load and Standby Conditions Without Additional Auxiliary Components. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2009.2033069
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.