The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Bridgeless High-Power-Factor Buck Converter
Abstract
A bridgeless buck power factor correction rectifier that substantially improves efficiency at low line of the universal-line range is introduced. By eliminating input bridge diodes, the proposed rectifier's efficiency is further improved. Moreover, the rectifier doubles its output voltage, which extends useable energy of the bulk capacitor after a dropout of the line voltage. The operation and performance of the proposed circuit was verified on a 700-W, universal-line experimental prototype operating at 65 kHz. The measured efficiencies at 50% load from 115 and 230 V line are both close to 96.4%. The efficiency difference between low line and high line is less than 0.5% at full load. A second-stage half-bridge converter was also included to show that the combined power stages easily meet Climate Saver Computing Initiative Gold Standard.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Topics in Multiple-Loop Regulators and Current-Mode Programming
Middlebrook, R. D. (1987) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.1987.4766345 · Cited by 336
Circuit topologies for single-phase voltage-doubler boost rectifiers
Salmon, J. C. (1993) · IEEE Transactions on Power Electronics · doi:10.1109/63.261023 · Cited by 207
Design-Oriented Analysis and Performance Evaluation of Buck PFC Front End
Huber, L., Gang, L., & Jovanovic, M. M. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2024667 · Cited by 192
Averaged and sampled-data models for current mode control: a re-examination
Verghese, G. C., Bruzos, C. A., & Mahabir, K. N. (2003) · 20th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1989.48526 · Cited by 166
A high-power-factor buck converter
Endo, H., Yamashita, T., & Sugiura, T. (1992) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1992.254766 · Cited by 137
Modeling, analysis, and application of buck converters in discontinuous-input-voltage mode operation
Lee, Y. S., Wang, S. J., & Hui, S. Y. R. (1997) · IEEE Transactions on Power Electronics · doi:10.1109/63.558762 · Cited by 70
Analysis of buck converters used as power factor preregulators
Spiazzi, G. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1997.616778 · Cited by 65
High performance ripple feedback for the buck unity-power-factor rectifier
Lo, Y.-W., & King, R. (1995) · IEEE Transactions on Power Electronics · doi:10.1109/63.372600 · Cited by 46
Huber, L., & Jovanovic, M. M. (1998) · IEEE Transactions on Power Electronics · doi:10.1109/63.668116 · Cited by 43
Cited by
A Novel Multilevel Multioutput Bidirectional Active Buck PFC Rectifier
Vahedi, H., & Al-Haddad, K. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2555279 · Cited by 122
Metadata
- Authors
- Jang, Y., & Jovanović, M. M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-02
- Volume
- 26
- Issue
- 2
- Pages
- 602-611
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2152722208
- Cited by
- 255
- References
- 9
- FWCI
- 10.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bridgeless High-Power-Factor Buck Converter. https://app.cochat.ai/papers/10.1109/tpel.2010.2068060
- The paper
- Jang, Y., & Jovanović, M. M. (2011). Bridgeless High-Power-Factor Buck Converter. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2010.2068060
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.