The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Multiport Power Electronic Interface—Concept, Modeling, and Design
Abstract
The continuous effort to improve efficiency, reduce particle, and greenhouse gase emissions leads to the emergence of the concept “more electric.” This concept helps to boost the performance as well as the flexibility of the domestic and vehicular applications; however, on the other hand, it excessively burdens current power networks (including vehicle power systems). In order to remedy this problem, simultaneous usage of renewable sources and energy storages is encouraged. A multiconverter system is commonly adopted to process the renewable power in form of distributed generation. However, due to the discrete structure of such systems, power flow and load regulation are coordinated via communication channel, which inevitably reduces the reliability and dynamic response of the system. This paper presents the concept of multiport power electronic interface (MPEI) for renewable energy sources and storages. With a unified modular topology and highly integrated digital control system, controlled quasi-current source is achieved for each input port in both steady-state and transient power-sharing modes. MPEI analysis, modeling, design, and system operation are treated in a systematic manner in this paper. Both power stages and digital control system are implemented for a five-port MPEI. Experiments are conducted under meaningful operation scenarios. The results are presented to prove the feasibility of MPEI concept and system design methodology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
A general unified approach to modelling switching-converter power stages
MIDDLEBROOK, R. D., & ĆUK, S. (1977) · International Journal of Electronics · doi:10.1080/00207217708900678 · Cited by 1,424
Input filter considerations in design and application of switching regulators.
Middlebrook, R. D. (1976) · Medical Entomology and Zoology · Cited by 1,180
Simplified analysis of PWM converters using model of PWM switch. II. Discontinuous conduction mode
Vorperian, V. (1990) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.106127 · Cited by 787
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
Simplified analysis of PWM converters using model of PWM switch. Continuous conduction mode
Vorperian, V. (1990) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.106126 · Cited by 716
Family of multiport bidirectional DC–DC converters
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050362 · Cited by 488
Design of Multiple-Input Power Converter for Hybrid Vehicles
Solero, L., Lidozzi, A., & Pomilio, J. A. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854020 · Cited by 478
Three-Port Triple-Half-Bridge Bidirectional Converter With Zero-Voltage Switching
Tao, H., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915023 · Cited by 404
Multi-input DC/DC converter based on the multiwinding transformer for renewable energy applications
Chen, Y.-M., Liu, Y.-C., & Wu, F.-Y. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800776 · Cited by 350
Small-signal modeling of average current-mode control
Tang, W., Lee, F. C., & Ridley, R. B. (1993) · IEEE Transactions on Power Electronics · doi:10.1109/63.223961 · Cited by 345
Power Electronics in Smart Electrical Energy Networks
(2008) · Power Systems · doi:10.1007/978-1-84800-318-7 · Cited by 289
A ZVS Bi-Directional DC–DC Converter for Multiple Energy Storage Elements
Liu, D., & Li, H. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.882450 · Cited by 283
Identification of Feasible Topologies for Multiple-Input DC–DC Converters
Kwasinski, A. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2009538 · Cited by 267
New DC–DC converter for energy storage system interfacing in fuel cell hybrid electric vehicles
Marchesoni, M., & Vacca, C. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886650 · Cited by 263
Power Budgeting of a Multiple-Input Buck-Boost Converter
Benavides, N. D., & Chapman, P. L. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.857531 · Cited by 189
Fuel cell and power conditioning system interactions
Schenck, M. E., Lai, J.-S., & Stanton, K. (2005) · Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005. · doi:10.1109/apec.2005.1452898 · Cited by 164
Photovoltaic-Battery-Powered DC Bus System for Common Portable Electronic Devices
Lu, D. D.-C., & Agelidis, V. G. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2011131 · Cited by 164
A three-port bi-directional converter for hybrid fuel cell systems
Michon, M., Duarte, J. L., Hendrix, M., & Simoes, M. G. (2004) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1354836 · Cited by 160
A Modular Fuel Cell, Modular DC–DC Converter Concept for High Performance and Enhanced Reliability
Palma, L., & Enjeti, P. N. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2012498 · Cited by 143
Multiple-input DC-DC power converter for power-flow management in hybrid vehicles
Napoli, A. D., Crescimbini, F., Solero, L., Caricchi, F., & Capponi, F. G. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2002.1043745 · Cited by 120
Su, G.-J., & Tang, L. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005386 · Cited by 108
Multi-port Power Electric Interface for Renewable Energy Sources
Jiang, W. Y., & Fahimi, B. (2009) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802680 · Cited by 95
Self-citationA Multiple-Input DC/DC Converter for Renewable Energy Systems
Chiu, H., Huang, H.-M., Lin, L., & Tseng, M. (2006) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2005.1600837 · Cited by 72
Multiple input converters for fuel cells
Ozpineci, B., Tolbert, L. M., & Du, Z. (2004) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2004.1348504 · Cited by 37
High-efficiency single-stage bidirectional converter with multi-input power sources
Wai, R., Lin, C., Liu, L. W., & Chang, Y.-R. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060500 · Cited by 24
Sensorless Control of a Bidirectional Boost Converter for a Fuel Cell Energy Management System
McLandrich, A. M. (2003) · VTechWorks (Virginia Tech) · Cited by 6
Cited by
Overview of Power Management Strategies of Hybrid AC/DC Microgrid
Nejabatkhah, F., & Li, Y. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2384999 · Cited by 986
Recent Advances of Wind-Solar Hybrid Renewable Energy Systems for Power Generation: A Review
Roy, P., He, J., Zhao, T., & Singh, Y. V. (2022) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2022.3144093 · Cited by 312
Topology Derivation of Nonisolated Three-Port DC–DC Converters From DIC and DOC
Wu, H., Sun, K., Ding, S., & Xing, Y. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2221746 · Cited by 298
Metadata
- Authors
- Jiang, W., & Fahimi, B.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-07
- Volume
- 26
- Issue
- 7
- Pages
- 1890-1900
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2106854907
- Cited by
- 259
- References
- 27
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.